Humax F2-Green - Manuals

Humax F2-Green – Manual in PDF format online.

Manuals:

Manual

Manual Humax F2-Green

Summary

Page 2 - Contents

Contents Safety .................................................................. GB2 Warning & Glossary ............................................. GB3 Reference ............................................................ GB4 ~ GB5 STB Connections ..............................................

Page 3 - Safety

Safety GB2 This STB has been manufactured to satisfy the international safety standards.Please read the following safety precautions carefully. MAINS SUPPLY : 230V AC 50/60Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : T...

Page 5 - Reference; Connect a Satellite antenna

Reference 2. Connect DiSEqC 1.2 3. Connect a Satellite antenna 4. Loop Through GB4 All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennasto be connected to the STB simultaneously.If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Co...

Page 7 - STB Connections; Front Panel

STB Connections Front Panel GB6 STANDBYPress to switch between Operation and Standby modes. DISPLAYShows service number, error messages and time in Standby mode. Remote Control Sensor Aim the remote control towards this spot on the STB. TV LED (GREEN)The LED lights on in TV mode. RADIO LED (GREEN) T...

Page 8 - Rear Panel

Rear Panel GB7 LNB INUse to connect an antenna. LNB OUTUse it when connecting to another STB. RS-232CUse it when connecting to your PC. TV SCART For the audio/video input of the TV. VCR SCARTFor the VCR. AUDIO OUTPUT Audio signal from your STB to Hi-Fi System. S/PDIFOutput for connection to a digita...

Page 9 - TV with VCR

1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect the coaxial cable from the LNB to the LNB IN socket on the STB. 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end...

Page 11 - Remote Control Unit

Page 13 - Function Guide; Menu language Setup Wizard

GB12 Function Guide When the language setting screen is initially displayed in factorydefault or during first time installation, select the language you prefer to use. 1. Press the buttons to move the cursor to the desired language. 2. Press the OK button to set Menu language. The details of service...

Page 14 - Change Services

To change services, do in the following;1. Press the NUMERIC buttons(0~9) on the remote control unit.2. Press the P+/P- buttons. Or press the RECENT( ) , CH LIST( ), FAVOURITE Buttons(A, B, C, D). To switch between TV and Radio services, press the TV/RADIO( ) button.When the RECENT( ) button is pres...

Page 15 - • Favourite; Channel Attribute

Function Guide The “Channel Attribute” feature allows you to display and changethe attributes of the current channel. A window that shows the information about the current service is displayed on the bottomof the screen. • Favourite To register the current service to FAV. A: 1. Move the cursor and s...

Page 18 - Press several channels using the OK button.; Group Attribute

Use this window to move group marked channel at the selected category and sort. To move, skip and lock or to register the present channel to thedesired Fav or Gr. 1. Press several channels using the OK button. 2. Press the button. 3. Select an item at the desired catagory and save. Group Attribute G...

Page 19 - Main Menu Guide

Main Menu Guide A service navigation system (Channel List) is provided for easierswitching to the service you wish to view. It consists of four windows: Category, Sort, Channel, and Operationwindows. Your STB has an Electronic Programme Guide (EPG) to help younavigate through all the possible viewin...

Page 20 - Service All

Channel List Menu provides a service navigation system for easierswitching to the service you wish to view. It consists of four windows: Category, Sort, Channel and Operationwindows. If a service is Scrambled service or Locked service, it is indicated withan icon displayed on the bottom right of the...

Page 21 - • Delete

Main Menu Guide Service Favourite menu consists of 4 sort lists. To display only the list of B Group services with ServiceFavourite menu: 1. Move the cursor to the Favourite menu on the Category window using the buttons. 2. Move the cursor to the Sort window using the button. 3. Move the cursor to B...

Page 23 - Category

Main Menu Guide You can watch a programme being shown and reserve it in the TV EPG mode. To enter the TV EPG modePress the GUIDE( ) button on the remote control unit or select the TV EPG on the Main Menu. To switch the TV/Radio EPGPress the TV/RADIO( ) button on the remote control unit and TVEPG wil...

Page 25 - Reserved EPG

Main Menu Guide Shows a Simple EPG like an Information box.This mode shows in the A/V playback mode.Black vertical line : Indicates the current time. Black/white bar : Shows the proceeding state of programme. Time range of bar : This consists of three blocks by 30 minutes per block. Shows the progra...

Page 27 - User Defined and press the OK button.; LNB Frequency

Main Menu Guide 1. Select the L.O. Frequency that is set to antenna. 2. Press the button to display the LNB Frequency list box (Item window). 3. Press the buttons to select the LNB frequency (Universal, 5150, 9750, 10600, 10750, 11475MHz, User Defined). 4. If the required LNB Frequency is not availa...

Page 29 - Network Search

Main Menu Guide 1. Press the button to move the Item window. 2. Use the buttons to select the Forward Error Correction of the transponder. You can select the value of Auto, 1/2, 2/3, 3/4, 5/6 , 7/8 and Auto. 1. Press the button to move to the item window 2. You can select Yes or No. When you select ...

Page 30 - Antenna Alternative

When you enter the Satellite Name that is set in Antenna Settingmenu, search all of the selected satellite without inputting the extrafrequency. 1. Press the button to move to the item window 2. Use the buttons to select the target antenna for Automatic Service Search. The attribute of this antenna ...

Page 31 - Advanced Search

Main Menu Guide GB30 Advanced Search Performs a manual search with the ability to enter PID (Video/Audio/PCR) values. This mode is necessary when you search for the signal that has abnormal service Information tables. You can set PID to search for services.1. Use the or OK buttons to move the Item w...

Page 33 - To change the audio language:; EXIT button : When this button is pressed, the Soundtrack OSD

Main Menu Guide When you want to change the audio language of current service,press MENU( ) button firstly. Use the buttons to select Sound Track and press the OK button.The soundtrack menu is displayed on the top to left side of thescreen. To change the audio language: 1. Move the cursor to the des...

Page 37 - move to the Item window using the OK or buttons.; Dolby Digital

If Dolby Digital option is ON and the broadcaster provides theDolby Digital stream, the Dolby Digital audio language is firstlyselected when changing the service. 1. Move the Category cursor to Dolby Digital, and then move to the Item window using the OK or buttons. 2. Select ON or OFF using the but...

Page 39 - STB Upgrade

Main Menu Guide You can download and upgrade the software of this STB via a satellite when the software of new version is released. Do not turn off the STB during downloading.When the power is switched OFF, turn on the STB and the processwill be continued. Select the target antenna for Manual Search...

Page 40 - Motorised System; DiSEqC 1.2 User Instructions

Motorised System If you have a Motorised System for DiSEqC1.2, you can set the Motorised System item to Enable on Category window and add necessary functions.When a Motorised System is set to Enable, you cannotselect DiSEqC Input items but, instead, you can use newmenus (Satellite Name, DiSEqC Comma...

Page 41 - Motor Limit Setting

To perform East/West fine-tuning for a satellite, set the Motorised System to Enableon Category window and select the Satellite Name, and then select User instead ofInstaller on the DiSEqC Command Mode item. Now, you can perform East/West fine-tuning for the selected satellite. To drive the motor, m...

Page 42 - Troubleshooting Guide

Page 43 - Menu Map

Page 45 - Specification; MPEG Transport Stream A/V Decoding

Specification Tuner & Channel MPEG Transport Stream A/V Decoding Memory Input ConnectorFrequency RangeInput ImpedanceSignal LevelIF & BandwidthLNB Power &Polarisation 22 KHz ToneDiSEqC ControlDemodulationInput Symbol RateFEC Decode Transport Stream Profile LevelInput RateAspect RatioVide...

Page 47 - Physical Specification; • Data rate decides the picture quality of digital TV programmes.

A/V & Data In/Out TV SCART VCR SCART AUDIO R/L Digital Audio OutputRS-232C Video Output(CVBS, S-Video, RGB)Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms)Video Output(CVBS)Video Input(CVBS, S-Video, RGB)Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms(fixed)RCA/Cinch Volume and Mute Contro...