Humax DV-1000T - Manuals

** This digital terrestrial receiver has been manufactured to satisfy international safety standards.Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY ** 90 - 250V AC 50/60HzOperate your product only from the type of power source indica...

** 10.LOCATION ** Place the receiver indoors to avoid exposing it to lightening, rain or sun.Do not place it near a radiator or heat register.Make sure it has more than 10 cm clearance from any appliances susceptible toelectromagnetic influences, such as TV and VCR.Do not block these openings with a...

** STB 1. Before Using the Receiver 1.1 Package Contents 1.2 Front Panel 1.3 Rear Panel 1.4 Remote Control GB12 ** GB12 GB13 GB14 GB15 2. Setup 2.1 Connecting the Antenna for STB 2.2 Connecting for DVD player 2.3 Powering On GB19 ** GB19 GB22 GB24 3. Loading 3.1 Booting Mode 3.2 Installation Wizard ...

** 7. Setting Preferences 7.1 Parental Control 7.2 Language Setting 7.3 Time Setting 7.4 Schedule 7.5 A/V Control 7.6 UHF Tunning 7.7 Miscellaneous Settings GB48 ** GB45 GB45 GB47 GB48 GB49 GB50 GB53 8. Installation 8.1 Automatic Search 8.2 Manual Search 8.3 Default Setting GB54 ** GB54 GB55 GB56 9....

** DVD Player 1. Getting Started GB73 ** 2. Playing a DVD-VIDEO Disc 2.1 Playing a title 2.2 General Information 2.3 Search 2.4 Skipping Chapter 2.5 Repeat Mode 2.6 Repeat a section of disc 2.7 Fast Playing 2.8 Slow Motion 2.9 Zooming in and out 2.10 Subtitle/Audio 2.11 Listening Mode 2.12 Time disp...

** This chapter describes detail instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your receiver. ** ** Remote Control (1) User's Manual (1) Batteries (2) Scart Cable (1) ** Note: Since faults may occur if the remote control is being...

** 1.3 Rear Panel ** 1. ANTENNA IN ** Connects a antenna to a antenna cable. ** 2. TV/VCR ** Connects a RF signal from your receiver to RF(ANT) input jack on your TV or VCR. ** 3. RS-232C ** Connects to your PC to upgrade product's software programme. ** 4. S-Video ** Connect your receiver to a TV o...

** 1.4 Remote Control STB RCU Note: This remote control can also control your TV. To set the remote control for your TV, please refer to Chapter 12. ** ** GB 15 ** ** ** ** ** ** ** ** ** ** ** ** ** **

** STB 1. TV ** Turn on the TV. ** 2. STB ** Turn on the STB. ** 3. TV/RADIO ** Switches between TV and Radiomodes. ** 4. WIDE ** Set the Display Format. ** 5. NUMERICAL BUTTONS ** Enters a TV/Radio channel number ormenu option number. ** 6. LIST ** Displays the channel list in DTV. ** 7. COLOR BUTT...

** DVD RCU ** ** GB 17 ** ** ** ** ** ** ** ** ** ** ** ** ** **

** DVD 1. DVD/DTV ** Change mode between DTV andDVD. ** 2. DISC MENU ** Displays the main disc menu. ** 3. MENU ** Displays the setup menu in DVD. ** 4. ARROW BUTTONS ** Changes the channel or move thecursor to the up, down, left or rightmenu option. ** 5. BACK ** Returns to the previous menu andscr...

** This chapter describes how to set up the receiver. Select the most appropriate procedure dependingon your requirements. Note: If you encounter any problem when setting up the receiver, please contact your localproduct distributor. 2.1 Connecting the Antenna for STB 1. Connecting TV and VCR with S...

** 2.2 Connecting for DVD player 1. Connection with Component Video (Y Pb Pr ) cable This method of transmitting pictures produces the highest quality as the video signal is split into itsY(brightness), U and V (red minus brightness, blue minus brightness)components. Insert one end ofa component vid...

** 3.1 Booting Mode When powering on your receiver for the first time, the mode selection will automatically appear. Select DTV or DVD using the or DVD/DTV and press the OK button. Please wait for booting the DTV or DVD. Note: If you don’t select a specific mode, then the previous mode willbe automa...

** 4.6 Programme Information (I- plate) Programme information is always displayed for a specific period of time whenever you switchchannels. You can view the programme information by pressing the i button while watching a programme. Press the EXIT button to hide the I-plate. 1. General Information G...

** 4. Current time 5. Detail programme information: displayed if detailed programme information is provided. 6. Channel looping mode and Channel List Name : if you select Within the current channel list by selecting MENU - Edit channels - Channel Change Mode , the Icon of Channel loopingmode is disp...

** 4.7 Option List You can view and confirm detailed information about the current channel and change the informationin necessary. Note: Press the OPT+ button when the channel list is displayed to view Option List. Then the following functions in the option list are performed to the current channel ...

** 3 types of channel lists are provided for easy and quick channel finding. TV The list of all TV channels with 2 subgroups: one is sorted by channel number, theother is sorted by channel name. Radio The list of all Radio channels with 2 subgroups: one is sorted by channel number, theother is sorte...

** 5.2 Changing Channel List Group You can select channel list by group. 1. Press the button while the channel list is displayed to view the group list. ** ** 2. Select your desired channel group using the button to display its sub-groups. ** ** 3. Press the OK or button, select your desired sub-gro...

** 5.3 Edit Channels You can edit all channels or each channel by channel list group. 1. Press the MENU button. 2. Select Edit Channels using the button, and press the OK or button. 3. Select Edit Channel lists using the button, and press the OK or button. 4. You will be prompted to enter your passw...

** 5.4 Edit Favourite Channels You can edit Favourite channel or Favourite channel list. 1. Press the MENU button. 2. Select Edit Channels using the button, and press the OK button. 3. Select Edit Favourite Channels using the button, and press the OK or button. Note: • Press the BACK or button to sa...

** 4. Additional Features Additional Features provides many useful functions which are necessary to add Favourite Channel. ** Change between TV and Radio channel list You can add not only TV channel(s) but also Radio channel(s) to Favourite channel list. Press to switch all channel list into TV or R...

** 5.5 Channel Change Mode You can change the channel either in the group or in the entire groups while watching a programme. 1. Press the MENU button. 2. Select Channel Change Mode using the button, and press the OK or button. 3. Select All Channels or within the current channel list using the butt...

** The Programme Guide displays programme information about each channel, based on the date andtime. You can also schedule your recording using the information given. Note: Press the GUIDE button to exit the Guide screen. ** 6.1 Viewing Programme Guide Information You can view programme information ...

** 2. Viewing Programme Information Using Time Bar You can quickly search for your desired time zone using the Time bar. 1. Press the GUIDE button. 2. Press the GREEN button to display Time Bar. 3. Select the Time Bar button using the button, and press the OK button to move as your desired amount of...

** 6.2 Finding a Programme You can find your desired programme by programme name or genre easily. 1. Press the GUIDE button. 2. Press the BLUEbutton to display Find screen. 3. Enter the programme name directly using the keyboard displayed on the screen. 4. When completing entering programme name, se...

** 6.3 Viewing Reserved Programme You can add or edit reserved programmes by viewing the reserved programme list. 1. Press the GUIDE button. ** 2. Press the YELLOW button to display the Schedule screen. ** 3. Select the scheduled programme and press the OK button to edit the reservation information....

** 2. Adding a Reservation 1. Enter your desired channel number using the NUMERICAL (0-9) button. The channel name isautomatically displayed by channel number. 2. Enter your desired Start Time using the button and the NUMERICAL (0-9) button. 3. Enter your desired End Time using the button and the NU...

** You can set censorship, watching time, and all other items suitable for your environment. Note: • Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit the Menu screen. • You can easily select any item from the menu using the NUMERICAL...

** 2. Setting Allow Watch Time You can block programmes according to the watching time for all the channels. 1. Select the Allow Time Control using the button, and press the or OK button. 2. Select Enable or Disable the Allow Time Control using the button, and press the or OK button. ** Disable You ...

** 3. Subtitle Font ** You can select the Subtitle font. 1. Select Subtitle Font using the button. 2. Press the or OK button to display the Variable or Fixed option. 3. Select your desired option and press the OK button. ** Variable Uses the horizontally variable Subtitle Font. Fixed Uses the fixed ...

** 5. Display Format You can select the Display Format according to TV Screen Ratio. 1. Select Display Format button, and press the OK or button. 2. If the Screen Ratio is set to 4:3, you can select one from 16:9 Letterbox/14:9 Letterbox/Centre Cutout using the button, and press the OK button. 3. If...

7.7 Miscellaneous Settings 1. Press the MENU button. 2. Select Preferences using the button, and press the OK or button. 3. Select Miscellaneous Settings using the button, and press the OK or button. 1. i-Plate Display Time You can set the duration during which the Information box is to be displayed...

** 8.1 Automatic Search If your receiver is connected to the aerial and television, you can automatically search channelswithout entering any other information. 1. Select MENU button. 2. Select Installation using the button, and press the OK or button. 3. Select Automatic Search from Installation me...

** 5 Software Auto-Detecting and Time You can specify the software detecting time. If the receiver powers on during software auto-detecting, Detecting will stop. 1. Select Software Auto-Detecting from Software Update screen using the button. 2. Select Enable or Disable using OK or button whether or ...

** You can manipulate TV using the remote control provided by Humax. Note: This function may not be supported depending on TV model. TV code setting Note: While you are setting TV code, please keep pressing TV button. 1. Point remote control towards the remote control receiving parts of TV. 2. Press...

** Loading a Disc You can switch to DVD player mode by pressing the DVD/STB button while in DTV mode. 1. Press the OPEN/CLOSE button to open the disc loading tray which is located at the front of your receiver. 2. Put the selected disc on the tray and check that it is located correctly. 3. Press the...

** You can recognise the DVD-Video disc by the logo. Each disc has one or more chapters. Your receiver moves within the titles or chapters to access easily and conveniently. ** DVD-VIDEO Disc TITLE 1 TITLE 2 Chapter 1 2 3 Chapter 1 2 3 Buttons Marker ** Marking ** A-B repeat ** Zoom on/off ** Play /...

** 2.3 Search You can move directly to your desired chapter/title /time/marker. Press the SEARCH button to change search mode. Press the EXIT or BACK button to immediately hide search mode on the screen . 1. Chapter/Title ** 1. Press the SEARCH button repeatedly to select a chapter or title. 2. Ente...

** 2.6 Repeat a section of disc You can set the sections to repeatedly switch between each other. 1. Press the A B button while playing a disc to set the repeat point to A. 2. Press the A B button repeatedly to repeat playing between Section A and B. 3. Play the setting start and end section repeate...

** 2.8 Slow Motion 1. Press the PAUSE button to temporarily stop the currently playing DVD disc. ** 2. Press the FORWARD button to play in slow motion. Each time you press the FORWARD button, the slow motion speed options are rotated as below. Slow motion 5%->8%->12%->20%->30%->40% -&...

** 4.4 Disc You can set the option of Disc. 1. Press the MENU button. 2. Select Disc using the button, and press the OK or button. 1. Video CD Playback Control You can set the playback control of video CD. Select Video CD Playback Control using the button, and press the OK or button. On Display vide...

** Before contacting your local service, please make sure following instructions. If the product does notwork normally after completing the following trouble shooting, please contact your local productdistributor or service centre. STB and DVD 1. No message is displayed on the front panel or product...

** DVD only 1. Disc can't be played - Ensure the disc label is upwards.- Clean the disc.- Check if the disc is defective by trying another disc.- Check region code. 2. No return to start-up screen when disc is removed. - Reset by switching the player off, then on again.- Check to see if the proramme...

** Tuner & Channel RF Loop through Output connector IEC-Type, IEC 169-24, male Frequency Range 48.5MHz to 226.5MHz (VHF) 470MHZ to 862MHz (UHF) 1Signal Level -10 to –70dBm Demodulation OFDM Mode 2K, 8K MPEG Transport Stream A/VDecoding Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Speci...

** Power Supply Input Voltage 90~250V AC, 50/60Hz Type SMPS Power Consumption Max. 35W Stand by Power 5W Protection 1Separate Internal Fuse. The input should be protected against lighting Physical Specification Size 420mm X 75mm X 300 mm Weight (Net) Around 4.8Kg Operating Temperature 0 to +45 Stora...

** Component Video (Y Pb Pr) This method of transmitting pictures produces the highest quality as the video signal is split into itsY(brightness), U and V(red minus rightness, blue minus brightness )components. The signal canalso be sent as interlaced or as progressive scan. Dolby Digital Dolby Labo...

** MP3 MP3 files are highly compressed music files. The data is compressed to 1/10 of the volume of theoriginal audio material using a special process. This means that 10 hours of music can be stored ona single CD. OSD (On Screen Display) The function that displays the information about the monitor ...

** You can get information such as a troubleshooting guide, software upgrades and product supportguide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when you have any problem. Web site and e-mail Homepage http://www.humaxdigital.com English...

** Call Center Humax Middle East Call Center (Dubai, UAE) Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday) E-mail: [email protected] Open: Local Time in Dubai (GMT+4) 9:00 - 20:00 (Saturday - Thursday, close on Friday) Support Language: English/Arabic ** Humax Hotline (Germ...