Humax CR-3510 - Manuals - manualsarea.com

Page 2 - Important Safeguards

1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference that may cause undesired operation. This television receiver provides display of television close...

Page 4 - • Ground outdoor antennas. If an outside antenna

3 • Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company. • Use only a grounded or polarized outlet. For your safety, this product is equipped with ...

Page 6 - Copyright; Warning

Support & Copyright First and foremost, our knowledge of the set top box marketplace along with technical expertise differentiates HUMAX. Moreover, we maintain very close working relationships with our customers. We take a highly disciplined engineering approach to product design, manufacture,te...

Page 7 - Reference; Connect a Satellite antenna

Reference To the digital receiver, you can connect either a single satellite antenna directly or through converterbox several antennas or LNB of multi-feed equipment.You can connect a further Sat-receiver (for example analog), with the receiver of common antenna equipment that has satellite signals....

Page 8 - Connecting the Set-Top Box

Connecting the Set-Top Box LNB INUse to connect an antenna. LNB OUTUse it when connecting to another STB. RS-232CUse it when connecting to your PC. S-VIDEOUse to connect an S-VIDEO signal fromyour STB to an S-VIDEO input jack on aVCR or TV. RCA AUDIO OUTPUTUse to connect an audio signal from yourSTB...

Page 9 - Connect a parabola antenna cable to the LNB IN jack.; Viewing the STB programs

From Cable/ Antenna Source TV Rear Panel 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV. 3. Turn on your STB and TV.4. Tune the STB t...

Page 11 - Connecting the Set-Top Box to Your TV and VCR; Recording a program from STB

TV Rear Panel VCR Rear Panel From Cable/ Antenna Source 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal cable to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV. 3. Connect a set of aud...

Page 12 - Remote Control Unit

STANDBY TV/SAT (Reserved) TV/RADIO MUTE MENU CURSOR OK P+/P- HELP EPG RCL (Recall) RS-101N NUMBER BUTTONS INFORMATION (RED) SOUNDTRACK (GREEN) SUBTITLE (Reserved) PAUSE (BLUE) EXIT V+/V- TIME (WHITE) Remote Control Unit 11

Page 14 - Volume Control; Guide of Functions

13 The details of Service Part and Event Part are automatically displayed on the I-Plate when pressing the( )button or changingservices. I-Plate is divided into Service Part and Event Part. Service Part consists of the following item : • I-Plate icon, Current Time• Service Name, Service Number, icon...

Page 15 - buttons : Use to select the audio language you want.; Changing Services

14 To change services, do in the following sequence:1. Press the Number buttons(0~9) on the remote control.2. Press the buttons or buttons. Or press the Recall( ), Service-List( ), EPG( )button.To switch between TV and Radio services, press the TV/Radio( )button.To select the previous viewed service...

Page 16 - Service List; Service Favorite

To select the desired service in the service list, you should firstly display the service list using button. Use buttons toselect a service and press button. Also use buttons to select a service directly in the service list. The Service List consists of Service All and Service Favorite.On the Servic...

Page 17 - This menu provides Calendar and Biorhythm.; Guide of Main Menu

16 Your STB has an Electronic Program Guide(EPG) to help younavigate through all the possible viewing options. The TV Guide supplies information such as program listings andstart and end times for all available services. In addition, detailed information about the program listings andstart and end t...

Page 18 - To watch a program you want through the display window :; • Use the buttons to select a program you want.; To reserve a program you want :; • Select a program you want by using the buttons or

17 You can watch a program being shown and reserve it in the TV Guide mode. To enter the TV Guide modePress the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio GuidePress the button on the remote control unit and TV Guide will be switched to th...

Page 21 - Language Setting

20 Select the language for Menu, Audio or Subtitle.1. Select the highlighted Language Setting using the buttons in the System Setting mode and then press the button. 2. Select the highlighted Menu(or Audio, Subtitle) Language and press the buttons and the language list will be displayed. 3. Use the ...

Page 22 - Time Setting; Depending on Time Setting, select the time when STB is turned off.; Current Time

21 Time Setting You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup Time mode andSleep Time (standby mode) can be set. When a VCR is connected,recording can be automatically done according to Wakeup/Sleep Time Setting. To set the Current Time, ent...

Page 23 - Select the OSD transparency and Information Box Display Time.; Other Setting

22 A/V Output Setting Set the Audio mode which is output from RCA/Cinch Jack.(Stereo/Mono) Select the aspect ratio of TV which is connected to STB(4:3 or 16:9). Select the format which the video is to be displayed on screen.When your TV set is 4:3 and video source is 16:9, STB will display in Letter...

Page 24 - Organize services that are included in memory for TV.; Delete; When the button is pressed, the message “Saving changed; Move; in front of the service number.; Organize TV Services

23 3-2. Service Organizing This menu gives users access to options that allow them to organizetheir Networks, TV services and Radio services.** The default PIN Code is . Organize services that are included in memory for TV. Delete, Move, Lock, Skip or Rename each TV service on all TV service list. •...

Page 26 - Press the button and the selected service channel will be; tt; Same functions as “Organize TV Services”; Organize Favorite Services

Delete, Move, Lock, Skip or Rename each TV service in a favorite TV group and re-group them into your favorite TV group.This mode has the same operating methods as “Organize All Services”. Moving the favorite group from the service group:1. Press the button to move to “Services”-Plate (right window)...

Page 27 - Select LNB parameters and switching connections.; Press User defined and the keyboard image will appear; Antenna Alternative

26 3-3. Service Searching Search for new services. This mode includes Antenna Setting and Manual Search. Select LNB parameters and switching connections. Use the buttons to select an antenna number for the requiredsatellite. Antenna alternative 16 is fixed for SMATV and its namecan’t be changed. Sel...

Page 28 - Manual Search

27 Find the services manually in the transponder you select.This search mode included normal advanced and SMATV search. Use the buttons to select an antenna number for the requiredsatellite. The satellite name will help you select antennas. If you want to search in SMATV mode, then select the Antenn...

Page 29 - • Smart Card details; You can see smart card address, the validity date and current; STB Status

28 Press the button to find services using PIDs and more items forselecting PIDs will be displayed. Press the button and Video,Audio and PCR PID items will be added. Enter the PID values forVideo, Audio and PCR. When the Number buttons(0~9) arepressed, a hexadecimal table will be displayed. Then you...

Page 30 - • Subscription; You can see the valid period of each service.; • Enable PIN Code; You can enable the PIN Code.; • Disable PIN Code; You can disable the PIN Code.; • Modify PIN Code

29 The user will select a single program provider by selecting its distributor label and you can get the information of available entitlements. • Subscription You can see the valid period of each service. • PPV (Pay Per View) If You purchased events in advance, the entitlements of Pay Per View event...

Page 31 - Mail Box

The STB can receive maximum 10 mails from program providers. To check and see the mails press the button. In the Mail list you can view or delete the mails. If you store 10 mails and a new mail arrives, the oldest mail will beerased and the new mail will be stored. 3-6. Default Setting Reset STB to ...

Page 32 - Troubleshooting Guide

31 Does not display any LED on the front panel or STB has no power. • Check the main power cable and check that it is plugged into a suitable power outlet.• Check whether STB is in Standby mode. No Picture • Ensure that the STB is switched on (see above).• Check the video output port (RCA/RF) is fir...

Page 34 - Main Menu; Menu Map

33 System Setting TV Guide Parental Control Language Setting Time Setting A/V Output Setting Service Organizing Organize TV Services Organize Radio Services Organize Networks Main Menu Other Setting VHF Tuning Current Time Wakeup Time Sleep Time Wakeup Service No. Menu Language Audio Language Subtit...

Page 36 - Transport Stream; Conditional Access Interface; CryptoWorks Embedded; Specification

35 Tuner & Channel MPEG Transport Stream A/V Decoding Memory Input ConnectorFrequency RangeInput ImpedanceSignal LevelIFIF Band widthLNB Power &Polarisation 22 KHz ToneDiSEqC ControlDemodulationInput Symbol RateFEC Decorder Transport Stream Profile LevelInput RateAspect RatioVideo Resolution...