Humax CI-5100X - Manuals

Humax CI-5100X – Manual in PDF format online.

Manuals:

Manual

Manual Humax CI-5100X

Summary

Page 2 - Contents

Contents Safety Copyright & Glossary Reference STB Connections Remote Control Unit Guide of Functions Guide of Main Menu Motorised System Troubleshooting Guide Menu Map Specification E2 E3 E4 ~ E5 E6 ~ E8 E9 ~ E10 E11 ~ E13 E14 ~ E35 E36 ~ E39 E40 E41 ~ E42 E43 ~ E44 E1

Page 3 - Safety

Safety This STB has been manufactured to satisfy the international safety standards.Please read the following safety precautions carefully. MAINS SUPPLY : 190 - 250 V AC 50/60 Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS...

Page 4 - is a trademark of France Telecom.; Copyright

Copyright & Glossary • VIACCESS TM is a trademark of France Telecom. • CryptoWorks(TM) is a trademark of Philips Electronics N.V. • Irdeto is a trademark of Mindport BV. • Nagravision is a registered trademark of Kudelski S.A. • Conax is a trademark of Telenor Conax AS. • “Dolby” and the double-...

Page 5 - Reference; • Connect an antenna cable through converter boxes; Connect a Satellite antenna

Reference All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennasto be connected to the STB simultaneously.If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input co...

Page 7 - STB Connections

STB Connections STANDBY LED(RED) Indicates that the STB is under standby. TV LED(AMBER) The LED lights on in TV mode. RADIO LED(GREEN) The LED lights on in RADIO mode. STANDBY Press to switch between Operation andStandby modes. TV/RADIO Press to switch between TV and Radio modes. P- Use to change se...

Page 8 - TV only

STB Connections 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a RF lead to the RF OUT connector on the STB and the other end to the RF IN connector on your TV. 3. Connect your TV antenna to the RF...

Page 10 - Remote Control Unit; GREEN

Remote Control Unit TV/RADIO STANDBY GUIDE YELLOW BLUE EXIT CURSOR V-/V+ RCL(RECALL) HELP OPTION MUTE SOURCE NUMERIC BUTTONS FAV GREEN RED OK P-/P+ MENU i(INFORMATION) FREEZE GREEN RED YELLOW BLUE GREEN RED YELLOW BLUE E9

Page 12 - Changing Services; Guide of Functions

The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services.I-Plate is divided into service part and event part. SERVICE PART consists of the following items: • I-Plate icon, Current time and Dolby Digital symbol• Service n...

Page 15 - Guide of Main Menu; Simple Service List

Guide of Main Menu E14 To select the desired in the service list, you should firstly display the service list using OK button. Use buttons to select a service and press OK button. Also use buttons to select a service directly in the service list. The contents of service list are as follows: 1. Use t...

Page 17 - To watch a programme you want through the display window:; To reserve a programme you want:

E16 You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide modePress the GUIDE( )button on the remote control unit or select theTV Guide on the Main Menu. To select the TV/RADIO GuidePress the TV/RADIO button on the remote control unit and TV Guide will be s...

Page 18 - • Press the OK button and then press the buttons to select; Reserved mode

Guide of Main Menu Shows the information of programmes that will be played for a week.To watch a programme you want through the display window: • Press the OK button and then press the buttons to select a programme you want. Press the OK button again. To reserve or cancel programme reservation: • Se...

Page 20 - Installation; Language Setting

Guide of Main Menu E19 This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selectingthe Installation mode in the Main Menu. 4-1. System Setting The System Setting mode supports the STB internal settingsaccording to the connection of the re...

Page 21 - Time Setting

E20 You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup mode and SleepTime(standby mode) can be set. When a VCR is connected,recording can be automatically done according to Wakeup/Sleep Time Setting. To set the Current Time, enter the Offset valu...

Page 22 - Audio Output

Guide of Main Menu E21 Set the video mode for the TV SCART output. Set the audio mode which is output from the TV SCART and RCA/Cinch Jack. (Stereo/Mono) lf Dolby Digital option is ON and the broadcaster providesthe Dolby Digital stream, the Dolby Digital audio language isfirstly selected when chang...

Page 23 - UHF Tuning

E22 You select the STB output by using the UHF channel. Select an UHF channel. The range of channels and frequency value are different for each PAL Standard:PAL I/G for Europe : CH21 ~ CH69PAL B for Europe/Australia : CH28 ~ CH69PAL D for China : CH13 ~ CH62 PAL K for Russia : CH21 ~ CH69 Select a P...

Page 24 - • Manual Mode

Guide of Main Menu E23 Select the OSD Transparency, Information Box Display Time and so on. Select the OSD Transparent type. It affects Information box, Soundtrack, Subtitle, Service list, Time and Quick mode of TV Guide. Use the buttons to toggle transparent, opaque,20%, 40%, 60% and 80%. Set the d...

Page 25 - Note : You can’t view the skipped services by using buttons.

E24 4-2. Service Organising This menu gives users access to options that allow them to organise their TV Services, Radio Services and Networks.** The default PIN code is . This mode allows users to Delete, Move, Lock and Skip TV Services. • Delete1. Press the RED button to delete unwanted services.2...

Page 26 - To group the services into Favourites; Organise Favourite A~D

Guide of Main Menu E25 Each of TV and Radio has four Favourite groups. Each Favourite group contains up to 100 services.Delete, Move, Lock or Skip each TV service in a Favourite TV group and re-group them into your Favourite TV group.This mode has the same operating methods as “organise allservices”...

Page 28 - Antenna Setting

Guide of Main Menu E27 4-3. Service Searching Enter the PIN code to access the Service Searching menu as you access the Parental Control or Service Organising menu. Press the OK button to start Service Search after setting the parameters.** The default PIN code is . Selects the antenna and LNB setti...

Page 29 - and enter the frequency manually using the NUMERIC

E28 1. Select the L.O. Frequency that is set to antenna.2. Use the buttons to select the LNB frequency(Universal, 5150, 9750, 10600, 10750, 11475MHz or 0, 1, ......., 9). 3. If the required LNB Frequency is not available, then select “0” and enter the frequency manually using the NUMERIC buttons(0~9...

Page 31 - Manual Search

E30 Set the search parameters(Frequency, Symbol Rate, etc.) to manually find the services that you have selected in the transponder.The bar on bottom of the submenu shows the signal level & quality(BER) of the entered parameters. Select the target antenna for Manual Search. The Satellite Name he...

Page 32 - Note : The picture and the found service list during Advanced

Guide of Main Menu E31 Performs a manual search with the ability to enter PID(Video/Audio/PCR) values. This mode is necessary when you search for the signal that has abnormal service Information tables.The setting of the sub items is the same as Manual Search. You can set PID to search for services....

Page 38 - Motorised System

Motorised System E37 3. Initial Satellite Position Search 4. Motor Limit Setting This is required when you first set your receiver up to use DiSEqC 1.2and sets the positions of all pre-programmed satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region...

Page 41 - Troubleshooting Guide

Page 43 - Menu Map

Page 44 - Conditional Access Interface; MPEG Transport Stream A/V Decoding; Specification

Conditional Access Interface Tuner & Channel PCMCIA 2 Slot Common Interface MPEG Transport Stream A/V Decoding Memory You can use a special antenna switch with DiSEqC commands. When changing ASTRA 1 to EUTELSAT for example, a DiSEqC command is sent with the 22KHz tonethrough the antenna cable. T...

Page 45 - Physical Specification

A/V & Data In/Out TV SCART VCR SCART VIDEO AUDIO R/L S/PDIF RS-232C Video Output(CVBS, S-Video, RGB)Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms)Video Output(CVBS)Video Input(CVBS, S-Video, RGB)Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms(fixed))RCA/Cinch, Video Output(CVBS)RCA/Cinch...