Hisense STARTEL9000X - Manuals

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 7of 40 Relative humidity Min. =30 % , Max. = 60 % Shielding effectiveness > 110 dB Electrical insulation > 10 k Ω Ground system resistance < 0.5 Ω Conducted chamber did not exceed following limits a...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 8of 40 6 MAIN TEST INSTRUMENTS NO. NAME TYPE SERIES NUMBER PRODUCER 1 Test Receiver ESS 847151/015 R&S 2 Test Receiver ESI40 831564/002 R&S 3 BiLog Antenna 3142B 9908-1403 EMCO 4 BiLog Antenna 3142B ...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 9of 40 ANNEX A MEASUREMENT RESULTS A.1 OUTPUT POWER (§22.913(a)) A.1.1 Summary During the process of testing, the EUT was controlled via Rhode & Schwarz Digital Radio Communication tester (CMU-200) to en...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 10of 40 Channel 363 Channel 777

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 11of 40 A.1.3 Radiated A.1.3.1 Description This is the test for the maximum radiated power from the EUT. Rule Part 24.232(b) specifies, "Mobile/portable stations are limited to 2 watts e.i.r.p. Peak powe...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 12of 40 COMMUNICATION TESTER. 1. Measure the carrier frequency at room temperature. 2. Subject the EUT to overnight soak at -30 ℃ . 3. EUT was powered via nominal voltage and connected to the CMU200. CMU200 ...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 13of 40 EUT1: F56110001172 Channel Frequency(MHz) Occupied Bandwidth (–20dBc BW)(MHz) 1013 824.70 1.379 363 835.89 1.370 777 848.31 1.394 Channel 1013-Occupied Bandwidth (-20dBc BW) Channel 363-Occupied Band...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 14of 40 Channel 777-Occupied Bandwidth (-20dBc BW) A.4 EMISSION BANDWIDTH (§22.917(b)) A.4.1Emission Bandwidth Results Similar to conducted emissions; Emission bandwidth measurements are only provided for se...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 15of 40 Channel 1013-Occupied Bandwidth (-26dBc BW) Channel 363-Occupied Bandwidth (-26dBc BW)

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 16of 40 Channel 777-Occupied Bandwidth (-26dBc BW) A.5 EMISSION LIMIT (§2.1051) A.5.1 Measurement Method The site is constructed in accordance with ANSI C63.4 – 1992 requirements and is recognized by the FCC...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 17of 40 b) EUT test EUT was placed on a 1.5 meter high non-conductive stand at a 3 meter test distance from the receive antenna. A receiving antenna was placed on the antenna mast 3 meters from the test item...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 18of 40 frequencies of the band (824.7 MHz, 835.89 MHz and 848.31 MHz). It was decided that measurements at these three carrier frequencies would be sufficient to demonstrate compliance with emissions limits...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 19of 40 A.5.3.2 RADIATED SPURIOUS EMISSIONS-Channel 363: 30MHz – 1.2GHz Radiated spurious emission limit :-13dBm. NOTE: peak above the limit line is the Carrier frequency @ ch-363 -50 -40 -30 -20 -10 0 10 20...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 20of 40 A.5.3.4 RADIATED SPURIOUS EMISSIONS-Channel 1013: 1.2GHz – 9GHz Radiated spurious emission limit :-13dBm. -70 -60 -50 -40 -30 -20 -10 Level [dBm] 1.2G 2G 3G 4G 5G 6G 7G 9G Frequency [Hz] MES 1013_RSE...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 21of 40 A.5.3.6 RADIATED SPURIOUS EMISSIONS-Channel 777: 1.2GHz – 9GHz Radiated spurious emission limit :-13dBm. -80 -70 -60 -50 -40 -30 -20 -10 Level [dBm] 1.2G 2G 3G 4G 5G 6G 7G 9G Frequency [Hz] MES 777_R...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 22of 40 A.5.3.8 RADIATED SPURIOUS EMISSIONS-EUT in Idle Mode: 1.2GHz – 9GHz Radiated spurious emission limit :-13dBm. -80 -70 -60 -50 -40 -30 -20 -10 Level [dBm] 1.2G 2G 3G 4G 5G 6G 7G 9G Frequency [Hz] MES ...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 23of 40 BAND EDGE BLOCK-Channel 1013

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 24of 40 BAND EDGE BLOCK-Channel 777

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 25of 40 BAND EDGE BLOCK-Channel 310 BAND EDGE BLOCK-Channel 357

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 26of 40 BAND EDGE BLOCK-Channel 643 BAND EDGE BLOCK-Channel 690

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 27of 40 BAND EDGE BLOCK-Channel 740 BAND EDGE BLOCK-Channel 693

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 28of 40 A.7 CONDUCTED SPURIOUS EMISSION (§2.1057/§22.917) A.7.1 Measurement Method The following steps outline the procedure used to measure the conducted emissions from the EUT. 1. Determine frequency range...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 29of 40 A.7.3.1 Channel 1013: 10MHz – 10GHz Spurious emission limit –13dBm. NOTE: peak above the limit line is the carrier frequency.

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 30of 40 A.7.3.2 Channel 363: 10MHz – 10GHz Spurious emission limit –13dBm. NOTE: peak above the limit line is the carrier frequency.

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 31of 40 A.7.3.3 Channel 777: 10MHz – 10GHz Spurious emission limit –13dBm NOTE: peak above the limit line is the carrier frequency.

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 32of 40 A.7.3.4 Idle mode: 10MHz – 10GHz Spurious emission limit –13dBm.

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 33of 40 A.8 CONDUCTED EMISSION (§15.107/§207) A.8.1 Limit Conducted Limit (dBµV) Frequency of Emission (MHz) Quasi -Peak Average 0.15 – 0.5 66 to 56* 56 to 46* 0.5 – 5 56 46 5 – 30 60 50 * Decreases with log...

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 34of 40 ANNEX B PHOTOGRAPH OF EUT External Photo Fixed Wireless Phone Fixed Wireless Phone

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 35of 40 Fixed Wireless Phone Fixed Wireless Phone

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 36of 40 Fixed Wireless Phone Fixed Wireless Phone

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 37of 40 Charger (AC/DC Adapter) Charger (AC/DC Adapter)

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 38of 40 Internal Photo Fixed Wireless Phone Disassembly Fixed Wireless Phone PCB

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 39of 40 Fixed Wireless Phone PCB Fixed Wireless Phone front view

Telecommunication Metrology Center of Ministry of Information Industry No. FCC- 2006001 Page 40of 40 ANNEX C TEST LAYOUT Pic1 Conducted Emission Pic2 Radiated Spurious Emission ***END OF REPORT BODY***

User Manual Startel 9000X （ V3.3 ） 3 installation or service can be dangerous and may invalidate the warranty. z Do not use the unit in designated “no cellular phone use” area. z Avoid exposure to high temperature or humidity. z Avoid wetting the unit with any liquid. If the unit gets wet, turn the ...

User Manual Startel 9000X （ V3.3 ） 5 3. Introduction 3.1 Front view of the Phone 3.2 LCD Display The LCD shows icons on the top of the LCD screen. Different icons appear based on the phone’s operating mode. : Indicates the signal strength in the service area . : Displayed when the CDMA service is en...

User Manual Startel 9000X （ V3.3 ） 6 Fixed Wireless Phone. STEP1. Check Components z Fixed Wireless Phone is supplied with the following standard unit and accessories: 1. STARTEL 9000X Main Unit with Handset 2. Dipole Antenna 3. Chargeable Battery Group 4. User Manual 5. AC/DC Power Adapter z Please...

User Manual Startel 9000X （ V3.3 ） 7 signal as shown in the figure in the next page. STEP4 Check the LCD Display z After you follow the installation instruction STEP3, please check the LCD for normal operation z If you do not see the status of service, please repeat the instruction of STEP3. And con...

User Manual Startel 9000X （ V3.3 ） 8 first number is selected and dialed out. 6. To disconnect the call, replace the handset or press “hands free” button. z To enter English character. Select [Multitap], and press once a keypad to enter the first letter labeled in the keypad, twice to enter the seco...

User Manual Startel 9000X （ V3.3 ） 9 z Correcting dialing mistakes 1. Press “ Clear” button shortly to erase the most recent digit. 2. Press and hold “ Clear” button for at least one second to erase all the entered digits. z If the phone is locked, enter the lock Code. z If the call did not go throu...

User Manual Startel 9000X （ V3.3 ） 11 5.2 Add Add to Phone You can add the new to the contacts. 1. Press [MENU] . 2. Press [Contacts]->[Add]->[Add to Phone] to enter the add new menu. 3. Press “Up/Down” button to select the contents types that you want to add which include Phone, Email, Addres...

User Manual Startel 9000X （ V3.3 ） 12 5.5 Memory state You can check memory state of contacts. 1. Press [MENU] . 2. Press [Contacts]->[memory state ] enter memory state menu. 6. Recent Calls 6.1 missed calls, incoming calls and outgoing calls There are three items including missed calls, incoming...

User Manual Startel 9000X （ V3.3 ） 13 2. Press [Recent Calls]->[Call Timers]->[Previous Call Time],[Outgoing Calls], [Incoming Calls] and [All Calls] to enter the corresponding menus. 3. Press “Left/Right” button to select the settings. Press [Reset] to set the timer to zero. 4. Press [OK] to ...

User Manual Startel 9000X （ V3.3 ） 14 1. Press [Messages] . 2. Press “Up/Down” to select [Create Message] 3. Input the phone number you want to send or select it from the contacts and press [Continue] to enter the message edit box, and then input the content you want to send and press [Continue]. Yo...

User Manual Startel 9000X （ V3.3 ） 19 9.7 Carrier Info. You can enable or disable Carrier Information. 1. Press [MENU] . 2. Press [Display Setting]->[Carrier Info.] to enter the Carrier Info. menu 10. Security setting 10.1 Forbidden Outgoing Calls You can set the forbidden outgoing calls 1. Press...

User Manual Startel 9000X （ V3.3 ） 20 10.4 Modify Keyboard Unlock You can change the keyboard unlock password. 1. Press [MENU] . 2. Press [Security Settings]->[Modify Keyboard unlock] to enter the keyboard unlock menu. 3. Input the old password and press “select”, and then input new password. 4. ...

User Manual Startel 9000X （ V3.3 ） 21 11.2 Call Forwarding You can set this function to forward the call to the third one when talking. 1. Press [MENU] in off-hook or talking state. 2. Press [Supp. Services]->[Call Forwarding] to enter the Call Forwarding menu 3. Press “Left/Right” button to sele...

User Manual Startel 9000X （ V3.3 ） 22 13. Beside Functions 13.1 Redial Pick up the handset or press “hands free” button and “RDL” button to redial last outgoing number. 13.2 Emergency Call Even if phone is in no service state, it is possible to call of Emergency number. 1. Pick up the handset or pre...

User Manual Startel 9000X （ V3.3 ） 26 Alarm View day View month Add event Set work hours Auto delete Scheduler Options Default alarm 15. General Information z Main Unit Item Description Tx Frequency 824MHz-849MHz Rx Frequency 869MHz-894MHz Channel Bandwidth 1.25MHz Tx Power Biggest RF output power: ...