Hisense PL1 - Manuals

4 openings on the Laser Cinema. • If this device has been in a warm environment, allow any built-up condensation to evaporate first BEFORE you switch the device on. • Do not allow a child to stand on or climb up this device. • Do NOT place any object above or in front of the lens because the laser l...

5 • Laser Cinema • 1 Remote control • 2 AAA or AA batteries • 2 pairs of gloves for handling the Laser Cinema • 1 Power Cord • 1 Audio Out Cable • Hisense 4K Laser Cinema Quick Setup Guide • Important Safety Information & Warranty Card • Cleaning kit for the lens • 2 C-shaped blocks • C-shaped B...

6 We strongly recommend that two people handle this device when moving it from one place to another. Be sure to protect the lens when you handle this device. Laser Cinema Diagram Remote control receiver Power Indicator Eye protection sensor Power button Lens with laser Air vents

7 STEP 2 Set up the Laser Cinema To begin setting up the Laser Cinema, we strongly recommend that TWO people move it from one place to another because of the weight. Be sure to protect the lens when you handle this device. STEP 1 Mount the Screen If you purchased a screen from Hisense to include wit...

9 Video Camera DVD Player External AV devices VCR Set-top Box Satellite Receiver HDMI audio adapter Digital audio adapter Red White External audio devices Audio Amplifier Speakers 4 4

10 Image size and projection distance X Y B B A Screen Screen Size (inch) X(mm) Y(mm) A(mm) B(mm) 80 1771 996 215 312 90 1993 1121 259 353 100 2214 1245 318 382 110 2435 1370 374 412 120 2657 1494 429 442 NOTE: The sizes of the screen for each projection distance may differ depending on the actual i...

11 FIT THE BOTTOM OF THE IMAGE TO THE SCREEN • If the image shifts to the left side, then move the Laser Cinema to the right. If the image shifts to the right side, then move the Laser Cinema to the left. STEP 3 Adjust the Display Image and the Screen Follow the steps in the order shown below, only ...

13 2. Now, rotate the Laser Cinema clockwise so that the bottom of the image is parallel with the screen. 3. Repeat the steps above until the top of the image is parallel with the screen. 4. If the upper-left corner is inside the screen after adjusting, use the wrench to rotate the front-left foot a...

14 FILL THE TOP OF THE IMAGE TO THE SCREEN If the top of the imge is wider than the screen, then use the wrench to rotate the left- and right-front feet of the Laser Cinema clockwise. If the top of the image is narrower than the screen, then use the wrench to rotate the left- and right-back feet of ...

15 STEP 4 Use Your Remote BUTTON DESCRIPTION Power on/off INPUT Change Laser Cinema input source input numbers and specialfunction buttons Enter to Live tab in launcher OK Confirmation button D-pad (up/down/left/right navigation buttons) Press to enter Menu Return to the previous place in the menu o...

17 STEP 5 Proceed through the Screen Setup Menu PROJECTION MODE If you need to flip the image over top-to-bottom and/or left-to-right, select the Projection Mode and press the UP/DOWN buttons. AUTOMATIC GEOMETRIC CORRECTION Before you use Automatic Geometric Correction function, ensure that the Lase...

18 NOTE: • To return the picture position to the factory default, select the Reset button on the screen. EYE PROTECTION In order to protect your eyes, do not look into the lens. This projector is shutting down in 5 seconds, the Laser Cinema screen is closed immediately. Begin to Enjoy Your Laser Cin...

19 Quick Problem-Solving Tips When you experience an issue with your Cinema, turn it off and on again. If this does not resolve the problem, then refer to the tips below. When I turn on my Laser Cinema, there is a delay for a few seconds before the picture appears. Is this normal? Yes, this is norma...

22 Product Specifications MODEL NAME PL1 DIMENSION (W × H × D) 20.9 × 4.7 × 13.2 inches(531 × 120 × 335 mm) WEIGHT 18.7 lbs (8.5 kg) ACTIVE SCREEN SIZE (DIAGONAL) 80 ~ 120 inches SCREEN RESOLUTION 3840 × 2160 AUDIO POWER 2 × 15 W POWER CONSUMPTION 300W POWER SUPPLY 120V ~ 60Hz CONNECTIVITY Built-in ...

23 FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can...

DISPLAY Shows the clock, cooking time and setting. COOKING TIME Use this key to cook food by time. TIME DEFROST Use this key to defrost the food by time. WEIGHT DEFROST Use this key to defrost the food by weight. POWER LEVEL Use this key to select the microwave power level. CLOCK SETTING Use this ke...

11 The oven is fi tted with a digital clock. When the oven is in the standby mode, the clock can be set in the 12-hour mode by pressing the Clock Setting key. 1. Press the Clock Setting and the digits will fl ash. 2. Press the Numeric (0-9) keys and enter the time. For example, to input the current ti...

17 1. Turn the oven off and remove the power plug from the wall socket before cleaning. 2. Keep the inside of the oven clean. When food splatters of spilled liquids adhere to oven walls,wipe with a damp cloth. The use of harsh detergent or abrasives is not recommended. 3. The outside oven surface sh...

1. Make sure all the packing materials are removed from the inside of the door. 2. Inspect the oven after unpacking for any visual damage such as: – Misaligned Door – Damaged Door – Dents or Holes in Door Window and Screen – Dents in Cavity If any of the above are visible, DO NOT use the oven. 3. Th...

1. If the oven will not perform at all, the information on the display does not appear or the display disappeared: a) Check to ensure that the oven is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds and plug it in again securely. b) Check the premises for a blown ...