Hisense 100L9H DLT100C - Manuals

5 ADDITIONAL ITEMS THAT COME WITH THE LASER TV IN A SEPARATE PACKAGE • A Display Screen (optional equipment)*• A set of Wall Mount Brackets (optional equipment)* * Additional items you receive will be based upon your order. • Laser TV • 1 Remote control • 2 AAA or AA batteries • 2 pairs of gloves fo...

6 We strongly recommend that two people handle this device when moving it from one place to another. Be sure to protect the lens when you handle this device. Laser TV Diagram Power Indicator Remote control receiver Air vents Eye protection sensor Power button Lens with laser Foreign Object Detect

7 STEP 2 Set up the Laser TV To begin setting up the Laser TV, we strongly recommend that TWO people move it from one place to another because of the weight. Be sure to protect the lens when you handle this device. STEP 1 Mount the Screen If you purchased a screen from Hisense to include with your L...

8 Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect the quality of the picture image and color. Ethernet (you will need a router for Internet connectivity) Ports to connect certain cables to Video Camera DVD Playe...

10 FIT THE BOTTOM OF THE IMAGE TO THE SCREEN If the image shifts to the left side, then move the Laser TV to the right. If the image shifts to the right side, then move the Laser TV to the left. STEP 3 Adjust the Display Image and the Screen Follow the steps in the order shown below, only if they ap...

12 2. Now, rotate the Laser TV clockwise so that the bottom of the image is parallel with the screen. 3. Repeat the steps above until the top of the image is parallel with the screen. 4. If the upper-left corner is inside the screen after adjusting, use the wrench to rotate the front-left foot and t...

13 FILL THE TOP OF THE IMAGE TO THE SCREEN If the top of the imge is wider than the screen, then use the wrench to rotate the left- and right-front feet of the Laser TV clockwise. If the top of the image is narrower than the screen, then use the wrench to rotate the left- and right-back feet of the ...

14 STEP 4 Use Your Remote BUTTON DESCRIPTION Power on/off INPUT Change Laser TV input source Enter Channels/input numbers and special function buttons Return to Live TVEnter to Live tab in launcherDisplay the Electronic Program Guide(if support) * OK Confirmation button D-pad (up/down/left/right nav...

16 STEP 5 Proceed through the Screen Setup Menu PROJECTION MODE If you need to flip the image over top-to-bottom and/or left-to-right, select the Projection Mode and press the UP/DOWN buttons. AUTOMATIC GEOMETRIC CORRECTION Before you use Automatic Geometric Correction function, ensure that the Lase...

17 NOTE: • To return the picture position to the factory default, select the Reset button on the screen. EYE PROTECTION In order to protect your eyes, do not look into the lens. This projector is shutting down in 5 seconds, the Laser TV screen is closed immediately. Begin to Enjoy Your Laser TV Your...

18 Quick Problem-Solving Tips When you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. When I turn on my Laser TV, there is a delay for a few seconds before the picture appears. Is this normal? Yes, this is normal. The L...

21 Product Specifications MODEL NAME 100L9H DIMENSION (W x H x D) 24.0 x 6.1 x 13.6 inches (610 x 155 x 346 mm) WEIGHT 24.7 lbs (11.2 kg) ACTIVE SCREEN SIZE (DIAGONAL) 100 inches SCREEN RESOLUTION 3840 x 2160 AUDIO POWER 2 x 20 W POWER CONSUMPTION 300W POWER SUPPLY 120 V ~ 60 Hz CONNECTIVITY Built-i...

23 FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can...