Henny Penny EEE-141 - Manuals

Model EEE-141,142, 143, 144 SECTION 2. INSTALLATION This section provides the installation and unpacking instructions forthe Henny Penny open fryer. Installation of this unit should be performed only by a qualifiedservice technician. Do not puncture the fryer with any objects such as drillsor screws...

Model EEE-141,142, 143, 144 The proper location of the fryer is very important for operation,speed, and convenience. The location of the open fryer shouldallow clearances for servicing and proper operation. Choose alocation which will provide easy loading and unloading withoutinterfering with the fi...

Model EEE-141,142, 143, 144 The fryer should be located with provision for venting into adequateexhaust hood or ventilation system. This is essential to permitefficient removal of steam exhaust and frying odors. Specialprecaution must be taken in designing an exhaust canopy to avoidinterference with...

Model EEE-141,142, 143, 144 Figure 3-1 3-1 110 SECTION 3. OPERATION 3-1. OPERATING COMPONENTS Refer to explanations on the next pages. 1 2 6 4 5 7 3 8 9 13 11 12 14 10 Figure 3-2 15 16 Figure 3-3 17 Figure 3-4 (Bulk Oil Supply Fryers Only) 4 18

Model EEE-141,142, 143, 144 1. Make sure basket support is in vat and the vat is filled with oil to the proper level. Model EEE-141, fill the oil reservoir. See Section 3-10. 2. Move power switch to the ON position and then press to turn on heat for the desired vat. If display shows “IS POTFILLED?” ...

Model EEE-141,142, 143, 144 7. If the oil has not pumped back to the proper level in the vat during the SmartFilter Express™ process, press X button for NO and pump runs for another 30 seconds. 9. Display shows “IS POT FILLED?” “YES NO”. Make sure vat is full and then press √√√√√ button and display ...

Model EEE-141,142, 143, 144 3-15. CHANGING THE FILTER PAD In order to assure good oil pumping performance, the filter pad (orpaper) should be changed at least once per day. If the filter pad has not been changed, a reminder shows on thedisplay, “CHANGE PAD”. Press √√√√√ button to cancel the message,...

Model EEE-141,142, 143, 144 3-15. CHANGING THE FILTER PAD (Continued) 5. Remove the filter pad retaining ring and clean thoroughly with soap and water. Rinse thoroughly with hot water and dry.Figure 5. 6. Pull the filter pad from the pan and discard pad. Figure 6. 7. Remove the bottom screen from pa...

Model EEE-141,142, 143, 144 3-15. CHANGING THE FILTER PAD (Continued) Be sure that the drain pan, bottom screen, crumb catcher,and the retaining ring are thoroughly dry before placing filterpad into pan as water will dissolve the filter pad. 9. Reassemble in reverse order, placing the bottom screen ...

Model EEE-141,142, 143, 144 If vat still has oil, press X button and display shows “DISPOSE” “YES NO”. Press √√√√√ button to dispose of the oil, or press X button to exit Clean-Out Mode. Display shows “IS DISPOSAL UNIT IN PLACE?” “YESNO”. If “NO” is selected, display shows “INSERT DISPOSALUNIT”. Onc...

Model EEE-141,142, 143, 144 SECTION 4. INFORMATION MODE This historic information can be recorded and used for operationaland technical help and allows you to view the following: • 1. E-LOG• 2. LAST LOAD• 3. DAILY STATS• 4. OIL STATS• 5. REVIEW USAGE• 6. INPUTS• 7. OUTPUTS• 8. OIL TEMP Not all Infor...

Model EEE-141,142, 143, 144 2. LAST LOAD (Information on recent cook cycles) Press and “2. LAST LOAD” show in displays. Press a timer button or for the product you want to view the cook data and the LED flashes. Press button to start viewing the cook data. For example, if the left LED is flashing, “...

Model EEE-141,142, 143, 144 Mixed Filter Tracking Filter After X Number of Loads 13b. Press button until “FILTER AFTER...” flashes in the left display along, and the number of cook cycles between filtersshows in the right display. Press the product buttons, or theand buttons, to change this value of...

Model EEE-141,142, 143, 144 Filter Tracking Mode (SP-8) Filter Tracking signals the operator when the oil needs filtering bycounting the number Cook Cycles between filters Press button and “SP-8” and “FILTER TRACKING MODE” show in the display. Use the andbuttons to choose either “1.MIXED” filter tra...

Model EEE-141,142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) Filter Tracking Mode (SP-8) (Continued) GLOBAL If GLOBAL is selected, press button. Split VatIf unit is a split vat, “SP-8A” and “LEFT VAT FILTERCYCLES” shows in the left display, and the number of cookcycles between filters shows on ...