Haier JC-110GD - Manuals

Installation instructions Installation instructions Please follow the installation instructions below to ensure your appliance operates correctly. Power supply The appliance must be installed so that the plug is accessible.To ensure that the appliance is not accidentally switched off, connect your W...

Installation instructions Before first use Remove all packaging from inside the Wine Cellar. Clean the inside of the appliance with warm water and a little liquid dishwashing detergent to remove manufacturing and transportation dust. Allow the Wine Cellar to run empty for at least 30 minutes to allo...

Operating instructions Operating instructions Temperature Control When the Wine Cellar is first turned on, it defaults to its red wine setting of 13°C (the light next to the “red wine” button on the display will be illuminated).The LED display will show the actual internal cabinet temperature of the...

Operating instructions Storing red and white wine in the Wine Cellar The temperature varies within the Wine Cellar, creating different wine storage zones. When storing a combination of red and white wine in the Wine Cellar, the top three shelves, the bottom shelf and the drawer should be used for re...

ON/OFF Operating instructions Interior fan The interior fan will stop when the door is opened and will start up again once the door has been closed. Ventilation control Your Wine Cellar is fitted with a ventilation control. This allows ambient air to enter and circulate through the Wine Cellar. Note...

Operating instructions Shelving There are 9 wooden shelves and 1 wooden drawer in the JC-160GD and 7 wooden shelves in the JC-110GD There are 9 wooden shelves and 1 wooden drawer in the JC-160GD and 7 wooden shelves in the JC-110GD for easy storage and removal of your wine. Larger bottles, or Magnum...

Cleaning and maintenance Warning! To avoid electric shock always unplug your Wine Cellar before cleaning. Ignoring this warning may result in death or injury.Before using cleaning products, always read and follow manufacturer’s instructions and warnings to avoid personal injury or product damage. Cl...

Cleaning and maintenance Replacing the light bulb 1 To avoid electric shock, unplug your Wine Cellar before replacing the bulb. 2 Remove the light cover as illustrated (Fig. 7). 3 Unscrew the bulb and replace. Bulb specification: 220-240V,15W,E14 4 Refit light cover. Normal operating sounds you may ...

Problem solving checklist Problem solving checklist If there is a problem with your appliance, please check the following points before contacting your local Haier Appliances Dealer or Authorised Service Agent or Customer Care Centre. Problem Possible causes What to do Wine Cellar does not operate N...

1. Remove all packaging material. This includes the foam base and all adhesive tape holding the wine cellar accessories inside and outside. 2. Inspect and remove any remains of packing, tape or printed materials before powering on the wine cellar. • Your wine cellar has three leveling legs which are...

Warning: To avoid electric shock always unplug yourwine cellar before cleaning. Ignoring this warningmay result in death or injury. Caution: Before using cleaning products, always read andfollow manufacturer’s instructions and warnings toavoid personal injury or product damage. General: • Prepare a ...

• Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the power cord from AC outlet when a power outage occurs. When power has been restored, replug power cord toAC outlet. • For long vacations or absences, unplug the wine cellar and clean the wine cellar and d...

Wine Cellar Does Not Operate: • Check if wine cellar is plugged in.• Check if there is power in the ac outlet, by checking the circuit breaker. Wine appears too warm: • Frequent door openings.• Allow time for recently added wine to reach desired temperature.• Check gaskets for proper seal.• Clean co...