Grizzly Industrial T10125 - Manuals

-2- T10125 6" spiral Cutterhead figure 3. example of jointer disassembly steps 1– 4 . figure 4. example of removing nut and lock washer on bearing block stud. figure 5. example of cutterhead removed. 5. remove the nut and lock washer on the bear- ing block stud, as shown in figure 4 , and repeat...

-3- T10125 6" spiral Cutterhead 13. Tighten the spiral cutterhead in place, and ensure both pulley setscrews are tight. 14. using the straightedge and feeler gauge set, inspect the cutterhead parallelism with the outfeed table as shown in figure 7 . With the straightedge in position, raise or lo...

-4- T10125 6" spiral Cutterhead When correctly set, the carbide insert will just touch the straightedge when the insert is at its highest point of rotation ( figure 10 ) . figure 10. using a straightedge to align outfeed table height with insert at TDC. HigV^\]iZY\Z Dji[ZZY >c[ZZY —if your ou...