Grizzly Industrial H0775 - Manuals

PARTS INVENTORY The Model H0775 Taper Attachment was carefully packed when it left our warehouse. If you discover that the taper attachment is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materi...

INSTALLATION INSTRUCTIONS The H0775 Taper Attachment mounts quickly to the back bed way of the G4016 Gear Head Lathe. Accurate tapers of up to 12" can be produced without repositioning the attachment. The H0775 features scales at both ends, reading inches-per-foot and degrees. An angle adjusting...

Angle Adjustments The taper angle is adjusted by loosening the two cap screws at the ends of the dovetail slide on the taper attachment. The angle adjusting knob allows for fine control of the angle ( Figure 9 ). There are two scales, one at each end of the main body. One is labeled for degrees and ...