Page 2 - SPECIFICATIONS; 0V brushless string trimmer; CONTENTS
2 Know your power head .................................................................................................... .. 8 - 9 Assembly ........................................................................................................................ 9 -12Operation .........................
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; W A R N I N G
3 IMPORTANT SAFETY INSTRUCTIONS W A R N I N G Read and understand all instructions before using this product. Failure to follow all • liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Do not allow children or untrained individuals to use this unit. • Don’t expo...
Page 5 - CHILD SAFETY
5 • If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. • Do not point the string trimmer in the direction of people or pets. • When not in use, string trimmer should be stored indoors in a dry, locked up place—out of th...
Page 6 - SYMBOLS; SYMBOL NAME
6 SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watts Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current Class II Construction Double-insulated construction No Load Spe...
Page 7 - SERVICE; SAVE THESE INSTRUCTIONS
The following signal words and meanings are intended to explain the levels of risk associated with this product. SERVICE service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts. W A R...
Page 8 - KNOW YOUR STRING TRIMMER
8 KNOW YOUR STRING TRIMMER KNOW YOUR STRING TRIMMER (See Figure 1.) The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all ...
Page 9 - ASSEMBLY; UNPACKING; PACKING LIST; ATTACHING THE GRASS DEFLECTOR
9 ASSEMBLY UNPACKING This product requires assembly. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the pa...
Page 10 - INSTALLING AN ATTACHMENT TO THE POWER HEAD
10 ASSEMBLY INSTALLING AN ATTACHMENT TO THE POWER HEAD (See Figure 3.) W A R N I N G Read and understand entire Operator’s Manual for each optional attachment used on this power head and follow all warnings and instructions. Failure to follow all instructions may result in W A R N I N G Never instal...
Page 11 - ATTACHING THE FRONT HANDLE; REMOVING THE ATTACHMENT FROM THE POWER HAED
11 ASSEMBLY ATTACHING THE FRONT HANDLE (See Figure 4.) Fig.4 BOLT • Press the front handle onto the power head shaft so that the handle is angled toward the rear handle. • Place the front handle along the power head shaft to a position that allows for comfortable operation. • Slide the bolt through ...
Page 12 - OPERATION; STARTING AND STOPPING THE TRIMMER
12 OPERATION W A R N I N G Read and understand entire Operator’s Manual for each optional attachment used on this power head and follow all warnings and instructions. Failure to follow all instructions may result in W A R N I N G Do not allow familiarity with product to make you careless. Remember t...
Page 13 - OPERATING THE TRIMMER
13 OPERATION Hold the power head with your right hand on the rear handle and your left hand on the front comfortable position with the rear handle about hip height. Always operate power head at full throttle. If debris becomes wrapped around the attachment, RELEASE THE SWITCH TRIGGER, and remove the...
Page 15 - INSTALLING STRING IN STRING HEAD
15 OPERATION INSTALLING STRING IN STRING HEAD REMOVING / REPLACING STRING HEAD See Figure 8 Fig.7 Fig.8 See Figure 7 1. Line up the spacer hole up with the hole in the gear box. 2. Place a small screw driver or metal rod (Not included) in the spacer hole. 3. Rotate the head clockwise to loosen and r...
Page 16 - LINE TRIMMING CUT-OFF BLADE
16 OPERATION LINE TRIMMING CUT-OFF BLADE See Figure 9. CUTTING TIPS (See Figures 10) Fig.10 DANGEROUS CUTTING AREA DIRECTION OF ROTATION BEST CUTTING AREA CUT-OFF BLADE Fig.9 • Avoid hot surfaces by always keeping the tool away from your body. (Proper operating position • Keep the trimmer tilted tow...
Page 17 - MAINTENANCE; GENERAL MAINTENANCE; CLEANING THE POWER HEAD
17 MAINTENANCE W A R N I N G etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of comm...
Page 18 - STORING THE POWER HEAD; TROUBLE SHOOTING; PROBLEM
18 MAINTENANCE NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents such as kerosene. STORING THE POWER HEAD • Clean all foreign material from the product. • Store it in a well-ventilated pla...
Page 19 - ITEMS NOT COVERED BY WARRANTY:; TRANSPORTATION CHARGES:; LIMITED FOUR-YEAR WARRANTY
19 GREENWORKS™ hereby warranties this product, to the original purchaser with proof of purchase , for a period of four (4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, ...
Page 20 - EXPLODED VIEW
Page 21 - PART LIST; DESCRIPTION
21 PART LIST ITEM NO. PART NO. DESCRIPTION QTY 1 31104975311232836311218363111283634107511-333307825311108363111483631102998 BatteryUpper shaftFront handleLower shaftKnobGuard connecterTrimmer headGuardCharger 1 2 1 3 1 4 1 5 1 6 1 789 111
Page 22 - Printed in China on 100% Recycled Paper
Printed in China on 100% Recycled Paper Rev: 00 (02-10-14) TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)