Page 2 - PRODUCT SPECIFICATIONS; 2 AMP ELECTRIC SNOW THROWER; CONTENTS
2 Contents .............................................................................................................................. 2 Product specifications .......................................................................................................... 2 Safety information ............
Page 3 - SAFETY INFORMATION; FOLLOW THESE RULES WHILE OPERATING THE SNOW THROWER; I M P O R T A N T
3 SAFETY INFORMATION FOLLOW THESE RULES WHILE OPERATING THE SNOW THROWER I M P O R T A N T READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. • Walk. Do not run.• Verify that the Snow Thrower is no...
Page 4 - GENERAL SAFETY RULES; SAVE THESE INSTRUCTIONS
4 SAFETY INFORMATION before attempting to use it. • Keep the impeller clear of debris.• Do not attempt to clear the impeller while the motor is running or while the Snow Thrower is plugged in it. Turn the motor off and unplug the Snow Thrower from the extension cord or the outlet. • Keep clothing an...
Page 5 - SYMBOLS; SYMBOL NAME
5 Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOLS no SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (...
Page 6 - SERVICE
6 The following signal words and meanings are intended to explain the levels of risk associated with this product. SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHO...
Page 7 - ELECTRICAL; ELECTRICAL INFORMATION; W A R N I N G; GROUNDING INSTRUCTIONS; EXTENSION CORD; W A R N I N G
7 ELECTRICAL ELECTRICAL INFORMATION (See Figure 1) W A R N I N G To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. The Snow Thrower is wired at the factory for 120 V operation. Connect to a 120 V, 15 A circuit and use a 15 A time delayed fuse or circuit...
Page 9 - KNOW YOUR SNOW THROWER
9 KNOW YOUR SNOW THROWER Fig. 2 Read this operator's manual and safety rules before operating your snow thrower. Compare the illustration in Figure 2 to your snow thrower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Up...
Page 10 - UNPACKING; PACKING LIST; ASSEMBLY INSTRUCTIONS
10 UNPACKING This product has been shipped completely assembled. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not di...
Page 11 - ASSEMBLING THE HANDLE
11 W A R N I N G Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. W A R N I N G Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could res...
Page 12 - ASSEMBLING THE DISCHARGE CHUTE
12 ASSEMBLING THE DISCHARGE CHUTE (See Figure 4) • Position the chute deflector (1) over the discharge chute (2), and align the mounting holes. • Insert a rubber washer (5) between the chute deflector (1) and the discharge chute, maintaining the alignment of the holes (3). • Attach the chute deflect...
Page 14 - STARTING THE SNOW THROWER; USING THE SWITCH; OPERATING INSTRUCTIONS
STARTING THE SNOW THROWER W A R N I N G Avoid accidental start-ups. Verify that the operator is in the starting position when using the snow thrower. In order to avoid serious injury, the operator and unit must be in a stable position when starting the Snow Thrower. USING THE SWITCH This Snow Throwe...
Page 15 - OPERATING TIPS
OPERATING TIPS (See Figure 6) W A R N I N G If the Snow Thrower hits a foreign object while it is in use, the object could be thrown in the direction of the operator or a bystander. Thrown objects could cause serious personal injury. Keep the area to be cleared free of all foreign objects that may b...
Page 16 - ADJUSTING THE DIRECTION OF DISCHARGE
ADJUSTING THE DIRECTION OF DISCHARGE Snow can be discharged to the left, straight ahead, or to the right of the operator.Follow these instructions in order to change the direction: • Release the safety switch in order to stop the rotor. NOTE: The control crank can revolve 810°. The discharge chute c...
Page 17 - MAINTENANCE; SERVICING; REPLACING THE SCRAPER; Screw
MAINTENANCE SERVICING Servicing should be performed by a qualified technician. Replacement parts for this Snow Thrower must be identical to the parts that they replace. If repairs are necessary, contact the Toll-Free Helpline, at 1-888-909-6757. Note: Identify the left and right sides of the Snow Th...
Page 18 - REPLACING THE ROTOR; Short shaft
MAINTENANCE REPLACING THE ROTOR (See Figures 8-11) • Remove the 4 screws that secure the right side cover to the frame of the Snow Thrower (Fig. 8).• Remove the short shaft (Fig. 9).• Push the sides of the housing out, as illustrated in Figure 10 and remove the rotor (Fig. 11).• Install the new roto...
Page 19 - REPLACING THE LARGE BELT; STORAGE
MAINTENANCE 19 REPLACING THE LARGE BELT (See Figures 12-14) • Remove the 4 screws that secure the left side plate to the frame of the Snow Thrower (Fig. 12). Remove the side plate. • Pull the bearing away from the small pulley. Remove the belt from the large pulley and the small pulley that is locat...
Page 20 - TROUBLESHOOTING
20 PROBLEM POSSIBLE CAUSE SOLUTION Then handle is not The carriage bolts are not Adjust the height of the handle, and verify in position. properly seated. that the carriage bolts are properly seated. Tighten the knobs. The Snow Thrower The power cord is disconnected Reconnect the cord, and use the c...
Page 21 - ITEMS NOT COVERED BY WARRANTY:; TRANSPORTATION CHARGES:; LIMITED FOUR-YEAR WARRANTY
21 GREENWORKS™ hereby warranties this product, to the original purchaser with proof of purchase , for a period of four (4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, ...
Page 22 - EXPLODED VIEW
Page 23 - PARTS LIST
23 ITEM NO. PART NO. DESCRIPTION QTY 1 33306100-10 Left side board 1 2 3290198 Belt 1 3 34901100 Strap 1 4 33212100 Tensioner fix shaft 1 5 32104100 Tensioner bearing 1 6 33211100 Tensioner shaft 1 7 33903100 Tensioner spring 1 8 34165100 Motor vent cover 2 9 32201100 Locknut 7 10 33305100 Tensioner...
Page 25 - NOTES
Page 26 - Printed in China on 100% recycle material
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Rev: 01 (05-18-11) Printed in China on 100% recycle material
