Grandstream Networks GXW-410x - Manuals

Grandstream Networks GXW-410x – Manual in PDF format online.

Manuals:

Manual

Manual Grandstream Networks GXW-410x

Summary

Page 2 - FXO; GXW-410x User Manual

TABLE OF CONTENTS GXW-410X USER MANUAL WELCOME.................................................................................................................................................... 4 PACKAGING ................................................................................................

Page 4 - ELCOME; Gateway GXW-410x Overview

W ELCOME Thank you for purchasing the Grandstream GXW–410x IP Analog FXO Gateway. The GXW–410x is a cost effective, easy to use and easy to configure IP communications solution for any business. The GXW–410x supports popular voice codecs and is designed for full SIP compatibility and interoperabilit...

Page 5 - PACKAGING; daptor; AFETY; ndstream Sales and Service; ARRANTY

PACKAGING Unpack and check all accessories. Equipment included in the package: daptor AFETY C OMPLIANCES ant with various safety standards including FCC/CE. Its power adaptor is reseller agreement with our reseller customer. End users should contact the company ndstream Sales and Service 1) One GXW-...

Page 6 - ONNECTING THE; GXW; Connect to the internal LAN network or Public Internet.; VIDEO IN; Connection for Analog based Video Surveillance Camera (RCA); RESET; Power adapter connection

C ONNECTING THE GXW-410 X F IGURE 1: D IAGRAM OF GXW-410 X B ACK P ANEL GXW-410x Power Supply FXO Ports LAN/WAN RJ-45 Ethernet Ports On/Off Switch VIDEO IN Jack T ABLE 1: D EFINITIONS OF THE GXW C ONNECTORS LAN (or PC) Connect your PC to this port. It will then be assigned an IP address from your Ro...

Page 7 - firmware upgrade

F IGURE 2: D IAGRAM OF GXW-410 X D ISPLAY P ANEL GXW- 410x Display FXO port T ABLE 2: D EFINITIONS OF THE GXW D ISPLAY P ANEL Power LED Indicates Power. Remains ON when Power is connected and unit is turned ON. Ready LED Remains ON after boot-up. LAN LED Indicates LAN (or WAN) port activity PC LED I...

Page 8 - With SIP accounts configured on Channels page.; In this case, the GXW acts like an endpoint; Without SIP accounts.; In this case, you simply have to configure the SIP Server to perform; Anywhere in the world

A PPLICATION D ESCRIPTION A. IP PBX / SIP Server with GXW410x A SIP proxy server such as Asterisk or a SIP registrar server can be deployed with the GXW-410x series. In this environment, the SIP server handles SIP registration and call control and the GXW-410x processes media conversion between IP a...

Page 9 - FXS

versa. All you need to make sure is that the 2 gateways are able to locate each other (they should be on the same LAN or on Public IPs). GXW–400 X & GXW–410 X S CENARIO /T OLL - F REE C ALLING B ETWEEN L OCATIONS Branch A - Boston, MA 4 employees In this diagram, configure the SIP Server field t...

Page 10 - EATURES; OFTWARE

For more information regarding this setup, email Grandstream technical support at [email protected] F EATURES GXW–410x is a next generation IP voice and video gateway that features full interoperability with leading IP-PBXs, SoftSwitches and SIP platforms. The Gateway series offers superb voic...

Page 11 - GXW– 410x FX0 Analog Gateway Series; Yes

T ABLE 3: GXW-410 X S OFTWARE F EATURES GXW– 410x FX0 Analog Gateway Series IP settings GXW-4104: 4 ports; 4 SIP accounts w/ choice of 3 SIP Server profiles GXW-4108: 8 ports; 8 SIP accounts w/ choice of 3 SIP Server profiles Round-robin port scheduling to ensure available lines to access PSTN netwo...

Page 12 - ONFIGURATION WITH; Launch web browser and type

C ONFIGURATION G UIDE C ONFIGURATION WITH W EB B ROWSER The GXW-410x has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the IP phone through any common web browser. Examples of GUI interfaces can be downloaded @ http...

Page 13 - Grandstream Device Configuration; Using the PPPoE feature

E ND U SER C ONFIGURATION Once this HTTP request is entered and sent from a Web browser, the GXW-410x will respond with a login screen. There are two default passwords for the login page: User Level: Password: Webpages allowed: End User Level 123 Only Status and Basic Settings Administrator Level ad...

Page 16 - Layer 3 QoS

T ABLE 8: A DVANCED C ONFIGURATION P AGE D EFINITIONS Admin Password Administrator password. Only the administrator can configure the “Advanced Settings” page. Password field is purposely left blank for security reasons. The maximum password length is 25 characters. G723 Rate G723 encoding rate (6.3...

Page 17 - Syslog Server

Firmware Upgrade & Provisioning This radio button will enable GXW-410x to download firmware or configuration file through either TFTP or HTTP. Via TFTP Server If selected, the GXW410x will attempt to retrieve new configuration file or new code image from the specified TFTP server at boot time. I...

Page 18 - By default it is 554.

Syslog Level Select the ATA to report the log level. Default is NONE. The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: 1. product model/version on boot up (INFO level) 2. NAT related info (INFO level) 3. sent or received SIP message (DEBUG le...

Page 19 - ONFIGURING THE; HANNELS; Table 9: FXO Lines Configuration Definitions.; An example; If enabled use threshold; Default value is 100ms.; DTMF Dial Pause

C ONFIGURING THE FXO C HANNELS Configuring the FXO channels on the GXW – 410x is an easy process. Follow the GUI interfaces. The Device Status page terms are defined in Table 9: FXO Lines Configuration Definitions. An example of the Channel Dialing Configuration is shown in Figure 6. Please note the...

Page 20 - - Along with the user-id and Profile, you also have the option to; Caller ID Scheme; The GXW410x supports 5 different types of schemes:-

Stage Method Syntax - ch1-8:1; {all channels 1 to 8 are set to value 1 or 2} Stage method can be set to either 1 or 2. In simple words, if you need to make a direct PSTN call from a VOIP endpoint you should set this to 1. When you set it to 2, you will first dial one of the VOIP channel accounts fro...

Page 21 - It is NOT the same as SIP Account ID.

T ABLE 10: C HANNELS P AGE D EFINITIONS Note – The channels here are basically SIP endpoints that will act as clients registering to the SIP Server configured under the appropriate Profile page. Channels It should be set same as the channel number (i.e 1, 2..4 or 8 depending on number of FXO ports)....

Page 22 - Default is 4 seconds.; Local SIP Listen Port

DTMF Method This parameter specifies the mechanism to transmit DTMF digits. There are7 modes supported: in audio which means DTMF is combined in audio signal (not very reliable with low bit-rate codec), via RTP (RFC2833), or via SIP INFO. Multiple DTMF transmission schemas can be selected. 1 – in-au...

Page 23 - – If you do not plan to use this feature just let it be default {x+}; ROFILES; When set to Yes the SIP Profile is activated.

D IAL P LAN The Dial Plan feature implemented is applicable for VOIP to PSTN calls only. You may configure a dial plan based on the following grammar:- 1. Accept Digits: 1,2,3,4,5,6,7,8,9,0,*,# 2. Grammar: x - any digit from 0-9; xx+ - at least 2 digit number; ^ - exclude; [3-5] - any digit of 3, 4,...

Page 24 - Default is No. Use only if proxy supports 484 response.; Force Timer

SIP Registration This parameter controls whether the GXW-410x needs to send REGISTER messages to the SIP Server. The default setting is “Yes”. Unregister on Reboot Default is No. If set to yes, the SIP user’s registration information will be cleared on reboot. Register Expiration This parameter allo...

Page 26 - You may re-login by clicking on the link below in 30 seconds.

S AVING THE C ONFIGURATION C HANGES Once a change is made, press the “Update” button in the Configuration Menu. The GXW-410x will display the following screen to confirm that the changes have been saved. To activate changes, reboot or power cycle the GXW-410x after all changes are made. F IGURE 5: S...

Page 27 - IDEO; PC side; (Grandstream does NOT recommend this network environment)

V IDEO S URVEILLANCE The GXW-410x can be used with an Analog Surveillance CCD Camera to perform video surveillance function. This application should be used in a LAN environment or when both sides have public IP address. V IDEO S URVEILLANCE P ROCEDURES ¾ Gateway side: 1. In the ADVANCED SETTING pag...

Page 29 - PGRADE THROUGH; HTTP; “Firmware Upgrade and Provisioning: Upgrade Via”

F IRMWARE U PGRADE Our latest official release can be downloaded from: http://www.grandstream.com/y-firmware.htm . Firmware (or software) upgrades can be done either via TFTP or HTTP. The corresponding configuration settings are on the configuration page. End users should NOT touch the configuration...

Page 30 - To upgrade firmware via TFTP, set the field; TFTP; Directions For Downloading TFTP Server; You can also download the free HTTP server from

U PGRADE THROUGH TFTP To upgrade firmware via TFTP, set the field “Firmware Upgrade and Provisioning: Upgrade Via” to TFTP. The TFTP server can be configured in either IP address format or FQDN. To configure the TFTP server via the Web configuration interface, follow these five steps: 1. Open your b...

Page 31 - The ONLY way to restore default factory settings is as follows:

R ESTORE F ACTORY D EFAULT S ETTING WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters o...

Page 33 - red for; configuration, where; Branch B – Denver, CO; The GXW-410x offers an IP to IP pure IP Communications System; employees; Grandstream IP

A PPLICATION T HREE : GXW CONNECTED WITH AN IP-PBX OR SIP S ERVER AND V IDEO S URVEILLANCE red for PPLICATION F OUR : U SING A GXW FOR P URE IP- IP C OMMUNICATION C ONFIGURATION configuration, where Scenario: The GXW-410x offers an additional video surveillance port which can be configu surveillance...

Page 34 - ADSL; Domain Name System

G LOSSARY OF T ERMS ADSL Asymmetric Digital Subscriber Line: Modems attached to twisted pair copper wiring that transmit from 1.5 to 9 Mbps downstream (to scriber) and from 16 kbps to 8 ps upstream, dependin e distance. AGC Automatic Gain Control is an electronic Mbps the sub 00 kb g on lin system f...

Page 35 - FQDN; n Protocol; two types

FQDN Fully Qualified Domain Name. A FQDN consists of a host and domain name, including top-level domain. For example, www.grandstream.com is a fully qualified domain name. www is the host, Grandstream is the second-level domain, and and.com is the top level domain. FXO Foreign eXchange Office. An FX...

Page 36 - connections

MTU A Maximum Transmission Unit (MTU) is the largest size packet or frame , specified in octet s (eight- net. The maximum for thernet is 1500 byte. AT Network Address Translation bit bytes), that can be sent in a packet- or frame-based network such as the InterE N NTP Network Time Protocol, a protoc...

Page 37 - UDP; datagrams

UDP User Datagram Protocol (UDP) is one of the core protocols of the Internet protocol suite . Using UDP, programs on networked computers can send short messages known as datagrams to one another. DP does not provide the reliability and ordering guarantees that TCP U does; datagrams may arrive out o...