Page 2 - Table of Contents
2 308213 Table of Contents Warnings 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation/Operation 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshooting the Air Motor 8 . . . . . . . . . . . . . . . . . . . . Preventive Maintenance Schedule 8 ....
Page 3 - Symbols; Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD
308213 3 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of seriousinjury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage toor destruction of equipment if you do not follow theinstructions. WARNING IN...
Page 4 - SKIN INJECTION HAZARD; MOVING PARTS HAZARD
4 308213 WARNING SKIN INJECTION HAZARD Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and causeextremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skincan also cause serious injury. D Fluid injected into the skin m...
Page 5 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD
308213 5 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page 7. D If there is any static spar...
Page 6 - Installation/Operation; System Accessories
6 308213 Installation/Operation CAUTION The Premier air motor is designed for intermittentduty cycle applications, such as spraying of corrosioncontrol materials, or adhesive and sealant applica-tions. It is not recommended for continuous dutycirculating systems. Contact your Graco distributorfor fu...
Page 8 - Troubleshooting the Air Motor; Preventive Maintenance Schedule; Check Chart
8 308213 Troubleshooting the Air Motor Preventive Maintenance Schedule The operating conditions of your particular systemdetermine how often maintenance is required. Estab-lish a preventive maintenance schedule by recordingwhen and what kind of maintenance is needed, andthen determine a regular sche...
Page 10 - Service; Required Service Tools
10 308213 Service Pressure Relief Procedure WARNING SKIN INJECTION HAZARD The system pressure must be manuallyrelieved to prevent the system fromstarting or spraying accidentally. Fluid under high pressure can be injected through theskin and cause serious injury. To reduce the risk ofan injury from ...
Page 11 - Air Motor Shroud; Air Valve Replacement
308213 11 Service WARNING To avoid serious injury and equipmentdamage, do not lift the equipment by thePremier air motor lift ring if the totalweight of the equipment exceeds 550 lb(250 kg). The lift ring cannot support thatweight. Air Motor Shroud NOTE: Reference numbers and letters in parentheses ...
Page 13 - Air Valve Service
308213 13 Service Air Valve Service NOTE: Service the air valve every 3 million cycles. If the air motor stalls, service the air valve immediately. NOTE: Air Valve Repair Kit 222959 is available. Parts included in the kit are marked with a symbol ( { ). For the best results, use all the parts in the...
Page 17 - Subplate and Rocker Assemblies
308213 17 Service Subplate and Rocker Assemblies NOTE: Air Valve Repair Kit 222959 is available. Parts included in the kit are marked with a symbol ( { ). For the best results, use all the parts in the kit. Disassembly WARNING To reduce the risk of serious injury whenever youare instructed to reliev...
Page 19 - Piston and Piston Rod Seals
308213 19 Service Piston and Piston Rod Seals NOTE: Air Motor Repair Kit 222958 is available. Parts included in the kit are marked with an asterisk (*). Forthe best results, use all the parts in the kit. Disassembly WARNING To reduce the risk of serious injury whenever youare instructed to relieve p...
Page 21 - Parts
308213 21 Parts Model 222800 Premier Air Motor, Series C NOTE: Some parts of this assembly are listed and pictured on page 22. 22 3 11* z 13 15 48 49 See page 22 06548B 13 13 14 35 50 50 51 51 53 54 57 60 66 63 64 65 61 See page 24 Y Ref.No. Part No. Description Qty. 3 184353 RING, lift 1 11* z 1094...
Page 27 - Dimensions; Side View
308213 27 Dimensions 06555 06554 06553 158.8 mm(6.25 in.)Downstroke 438.4 mm (17.3 in.) 424.5 mm (16.7 in.) 67.5 mm(2.7 in.) 135.0 mm (5.3 in.) 50.7 mm(2.0 in.) 101.5 mm (4.0 in.) 116.9 mm(4.6 in.) 87.9 mm(3.5 in.) 1 in.npsm(f) Air Inlet Three M16 x 2.0 Holes Side View Top View Bottom View 38.3 mm(1...
Page 28 - Graco Standard Warranty; Graco Information
28 308213 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on thedate of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,Grac...