Graco 206661 - Manuals - manualsarea.com

Page 2 - Symbols; Warning Symbol; Caution Symbol; CAUTION; WARNING; EQUIPMENT MISUSE HAZARD

2 306878 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of seriousinjury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage toor destruction of equipment if you do not follow theinstructions. WARNING IN...

Page 3 - INJECTION HAZARD; TOXIC FLUID HAZARD

306878 3 WARNING INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremelyserious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can alsocause serious injury. D Fluid injected into the skin might look l...

Page 4 - Installation; Before Installing the Fluid Regulator

4 306878 Installation Fluid pressure regulators are used for accurate, posi-tive control of the fluid pressure to spray guns, dis-pensing valves or atomizing heads. Regulators installed at circulating line take-offs orpumps are used to reduce main line pressure andmaintain the desired fluid pressure...

Page 5 - Single Direct Spray Station

306878 5 Installation Fig 1 Fig 2 FLUID SUPPLY LINE BACKPRESSUREVALVE AIR REGULATOR FLUID REGULATOR SPRAY GUN GAUGE FLUID DRAIN VALVE PUMP FLUID RETURN LINE AIR REGULATOR PUMP FLUID DRAIN VALVE FLUID REGULATOR SPRAY GUN SUPPLY CONTAINER SUPPLY CONTAINER Single Direct Spray Station Multiple Circulati...

Page 6 - Notes

Page 7 - Operation; Pressure Relief Procedure; Adjusting the Regulator

306878 7 Operation Pressure Relief Procedure WARNING INJECTION HAZARDThe system pressure must be manuallyrelieved to prevent the system fromstarting or spraying accidentally. Fluid under high pressure can be injected through theskin and cause serious injury. To reduce the risk ofan injury from injec...

Page 8 - Maintenance; Flushing; Repairing

8 306878 Maintenance WARNING COMPONENT RUPTURE HAZARDTo reduce the risk of serious bodily inju-ry, including fluid injection or splashing inthe eyes or on the skin, always follow the Pressure Relief Procedure on page 7 beforeadjusting, cleaning, repairing, or removing the regu-lator from the system....

Page 9 - Parts

306878 9 Parts 6 9 11 7 *10 19 3 *15 Torque to 55 to 65 in-lb (6.3 to 7.3 N S m) 16 18 8 n 13 8 5* 20* 17 2 14 12 1 26 4 Install with lips down Use Loctite r Grade 601on threads Torque to 175 to 200 in-lb (20 to 22 N S m) Use Loctite r Grade TL242 on threads MountingParts 1 Model 206661, Series G In...

Page 11 - Accessories; Fluid Pressure Gauges; Technical Data

306878 11 Accessories Use Only Genuine Graco Parts and Accessories Fluid Pressure Gauges Attaches to optional regulator outlet.2 in. (51 mm) dial. 102397 0–3000 psi (0–21 MPa, 0–207 bar)1/4 npt(m) center back fitting 101696 0–1000 psi (0–7 MPa, 0–70 bar)1/4 npt(m) bottom fitting UHMW Polyethylene U-...