GMC LS211 - Manuals

9 Know your product Before using the saw, familiarise yourself with all the operating features and safety requirements.1. Saw arm 2. Release knob 3. Operating handle 4. Upper fixed blade guard 5. Rotating blade guard 6. Guard retraction arm 7. Bevel lock 8. Bevel scale 9. 45° Bevel adjustment screw ...

12 3. Loosen the mitre locks (15).4. Rotate the table (12) until the pointer is positioned at 0º.5. Tighten the mitre locks (15).6. Loosen the bevel lock (7) and set the saw arm (1) at 0º bevel (the blade at 90º to the mitre table). Tighten the bevel lock (7). 7. Place a set square against the table...

13 10. Loosen the Phillips head screw holding the pointer of the mitre scale (13) and adjust it so that it accurately indicates the zero position on the mitre scale (fig. P). 11. Retighten the screw securing the mitre scale pointer. Changing a blade DANGER! Never try to use a blade larger than the s...

15 1. Pull on the release knob (2) and lift the saw arm to its full height. 2. Loosen the mitre locks (15).3. Rotate the mitre table (12) until the pointer aligns with zero on the mitre scale (13). 4. Retighten the mitre locks (15). WARNING. Be sure to tighten the mitre locks before making a cut. Fa...

Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia)or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: • GMC Product Type ...