GMC LS211 - Manual - manualsarea.com

Page 2 - Contents; Full 2 Years Home Use Warranty

Contents Full 2 Years Home Use Warranty Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the assistance of our service department.This ...

Page 6 - Additional safety rules for mitre saws

6 13. Disconnect idle tools. Switch off the power and disconnect the plug from the power point before servicing, when changing accessories and when the tool is not in use. 14. Remove adjusting keys and wrenches. Check to see that keys and adjusting wrenches are removed from the tool before switching...

Page 8 - Accessories; The GMC LS211 Compound Mitre Saw is supplied with the

8 Accessories The GMC LS211 Compound Mitre Saw is supplied with the following accessories as standard: • Saw blade (fiited) • 6mm Hex Key • Instruction manual • Receipt holder

Page 9 - Know your product

9 Know your product Before using the saw, familiarise yourself with all the operating features and safety requirements.1. Saw arm 2. Release knob 3. Operating handle 4. Upper fixed blade guard 5. Rotating blade guard 6. Guard retraction arm 7. Bevel lock 8. Bevel scale 9. 45° Bevel adjustment screw ...

Page 12 - Setting the fence square with the table

12 3. Loosen the mitre locks (15).4. Rotate the table (12) until the pointer is positioned at 0º.5. Tighten the mitre locks (15).6. Loosen the bevel lock (7) and set the saw arm (1) at 0º bevel (the blade at 90º to the mitre table). Tighten the bevel lock (7). 7. Place a set square against the table...

Page 13 - Changing a blade

13 10. Loosen the Phillips head screw holding the pointer of the mitre scale (13) and adjust it so that it accurately indicates the zero position on the mitre scale (fig. P). 11. Retighten the screw securing the mitre scale pointer. Changing a blade DANGER! Never try to use a blade larger than the s...

Page 15 - Compound mitre cut

15 1. Pull on the release knob (2) and lift the saw arm to its full height. 2. Loosen the mitre locks (15).3. Rotate the mitre table (12) until the pointer aligns with zero on the mitre scale (13). 4. Retighten the mitre locks (15). WARNING. Be sure to tighten the mitre locks before making a cut. Fa...

Page 20 - GMC Product Type; The GMC 777 Helpline operates from 7am to; Save this Manual for future reference.

Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia)or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: • GMC Product Type ...

GMC LS211 - Manual

Table of Contents:

Summary

Other GMC Models