GBC 620OS - Manuals

GBC 620os Operation Manual © 2007 General Binding Corporation Page 5 ARRANTY W Limited 90- Day Warranty GBC warrants to the original purchaser for a period of ninety days on labor and one year on parts after installation that this laminator is free from defects in workmanship and material under norm...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 6 RE-INSTALLATION P Before a 620os Laminator can be installed, ensure the llowing requirements are met: the site? provides space for efficient d vapor ed air. e rollers and result in poor output quality. nt protection and safety lock...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 7 NTROL GUIDE FRONT CO Figure 1 play the settings the machine is s for the top heater, speed, Burst, t. es not stand for Feet/Minute. eet/Minute. eat roll for the purpose of ing the film. reverses the rollers rection to clear film ja...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 8 FRONT CONTROL GUIDE Figure 2 LCD Display: • HEAT: This displays the Temperature the machine is set at. Figure 2 . indicates the set e e location run the nt will indicate how many sheets of media were run through the laminator. To r...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 9 FEATURES/ACCESORIES GUIDE Refer to the following pages for detailed Features. information on the Figure 1 Fig ure 2 Fig e 3 ur Figure 4 ement. To disengage, turn the EMERGENCY atches ensures that serted properly and if not perate. ...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 13 FEATURES/ACCESORIES GUIDE Figure 15 Figure 16 Figure 17 BURSTING ROLLERS ( Fig. 14– Item N1) When the Bursting Rollers are activated, images are separated. There are 2 speeds to select from on the Main Control Panel. STACKER TRAY ...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 14 LOADING FILM & THREADING FILM Locking Pins Figure 1 “O”-Rings Film Shaft Support Bracket Film Shaft Figure 2 Top Idler Lower Idler Main Roller Figure 3 Figure 4 DO NOT USE COLORED PRINTS AS SHOWN IN PHOTOS FOR THREADING. STEP ...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 18 SLITTING FILM In-Line Slitters Rewinder Tube Tension Adjustment Knob Figure 15 Figure 16 Figure 17 Slitting Film: You always want to use film that is narrower than the sheets being laminated, so sometimes it may be necessary to sl...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 19 SPEED / TEMPERATURE CONTROL This is only a general reference guide. Different settings may be suitable as the warm up time, lamination time and materials change. Factors that may affect the speed and temperature parameters; 1. Ima...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 20 OUTPUT TROUBLESHOOTING - A - - B - Figure 1 A & B - A - - B - Figure 2 A & B 1. Straight waves in output (Fig. 1A). • Check operational settings for materials being used. • Check for moisture in the media. 2. Indent waves ...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 22 TROUBLE SHOOTING GUIDE SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION The control panel display does not illuminate when POWER ON/OFF is in the ON, marked “I”, position Laminator not connected to electrical supply Insert attachment plug...

GBC 620os Operation Manual © 2007 General Binding Corporation Page 23 MAINTENANCE Caring For the GBC 620os Laminator GBC offers Cleaning kits as well as Extended Maintenance Agreements. Contact your local GBC Service Representative or your dealer/distributor for additional information. The only main...