Fujitsu XG1200 - Manuals

About This Manual 7 This manual is written for an administrator who has responsibility for network system configu-ration, maintenance, and management.Understanding of the following knowledge is expected. • Basic knowledge of networks, intranets and the internet. • Basic knowledge of system managemen...

8 About This Manual This manual uses the following symbols. Company names and products names referred in this manual are registered trademarks ortrademarks of respective companies.The trademark ™ and ® have been omitted from this manual. The latest product information including technical information...

3 Contents 9 1 2 A Contents Preface ......................................................................................................... 1For Safe Use of the XG1200 ........................................................................ 2 Warning notations ........................................

Before Use This chapter lists the items that should be in the XG1200 package, describes the names and functions of the various components of the XG1200. 1-1 Parts List.................................................................................................. 12 1-2 XG1200 Components ............

12 Before Use 1-1 Parts List Before proceeding, check that all of the following parts were included in your XG1200 package.Contact the vendor's service department if any parts are missing and/or the manual has any miss-ing or wrongly collated pages.Keep the hardware guide (this manual) and the CD-RO...

16 Before Use There are three main indicator LEDs on the front of the XG1200: Power LED, Alarm LED, andStatus LED. The following explains the LED display under various conditions. *1: If the XG1200 is operating normally. If a problem occurs, the front panel LEDs and the LEDs on the individual parts ...

Labels 17 1 Obey the following warning: 1-3 Labels A warning sticker, product nameplate, product ID label, and MAC label are to be found in variousplaces on the XG1200. Product Nameplate Rear View of XG1200 Right View of XG1200 Top View of XG1200 Product ID Label MAC Label Warning Sticker FAN Warnin...

18 Before Use This indicates the model, part number, serial number, etc. This indicates the model, serial number, etc. Product nameplate MODEL.PART NO. PASER NO. P 1 50/60Hz **** Kg100-240V *** **** A/INPUT 0 1 2 3 4 5 6 7 8 9 a FUJITSU company MADE IN JAPAN 0 1 2 3 4 5 6 7 8 90 1 2 3 4 5 6 7 8 9 * ...

Labels 19 1 This indicates the MAC address: MAC addresses are allotted relative to the address on the MAC label: MAC Label Address on the MAC label Location xx:xx:xx:xx:xx:xx Mng-LAN xx:xx:xx:xx:xx:xx+1 XG1200 xx:xx:xx:xx:xx:xx+2 Port 1 xx:xx:xx:xx:xx:xx+3 Port 2 xx:xx:xx:xx:xx:xx+4 Port 3 xx:xx:xx:...

Installation and Operation This chapter explains how the user should proceed from installation to operation of the XG1200. 2-1 Installation Overview ............................................................................... 22 2-2 Installation Procedure ............................................

22 Installation and Operation Install the XG1200 and the proceed with normal operation as follows: 2-1 Installation Overview This section reviews the flow of work as the user proceeds from installation to operation of theXG1200. Check that the everything is secure 4 Turn the power on 5 "For Safe...

Installation Procedure 23 2 Before installing the XG1200, read " For Safe Use of the XG1200" (page 2) and comply withthe installation requirements described below. When installing the XG1200, a certain amount of installation space is necessary.When installing the rack, the indicated space (8...

24 Installation and Operation Only use the XG1200 under the temperature, humidity and other environmental conditionsspecified in "A.2 Installation Specifications" (page 38). Using the XG1200 outside the follow-ing ranges can shorten the lifetime or cause the failure of the XG1200. - Temperat...

Cable Connection 29 2 The fiber optic cables need to be connected to the XG1200’s Xenpak modules. 1. Connect the fiber optic cables to the XG1200. Connect the fibre optic cables to the Xenpak modules Port 1 - Port 12 on the front. Attention Attention • An fiber optic connector is used when connectin...

32 Installation and Operation CAUTION Do not move, shock, or vibrate the XG1200 while it is on. 1. Turn the power switch to the "on" position by pressing the [ ] side. The Power LED (Green) on the front of the XG1200 should turn on. The Alarm LED (Orange)should turn on for a moment, then sho...

Troubleshooting This chapter describes what you should do when your XG1200 has problems. 3-1 Start-up Problems .................................................................................... 34 3-2 Hardware Problems ..................................................................................

34 Troubleshooting [Symptom]The power switch is turned on, but the XG1200 does not power up.[Cause] Possible causes:1: Loose cable, or2: Hardware failure [Solution] 1: Check that all cables are connected properly, then (if the XG1200 still doesn’t turn on)2: Contact the vendor's service department. ...

Hardware Problems 35 3 When a problem is detected with a fan, the front panel Alarm LED lights up in orange, theLED of the fan unit in which the error has occurred lights up in orange, and an error isrecorded in the event log.If a fan error occurs, contact the vendor's service department. When XG120...

Appendix This appendix explains XG1200 specifications. Appendix-A Specifications ............................................................................. 38 A.1 Product Specifications ................................................................... 38 A.2 Installation Specifications............

38 Appendix The product specifications of the XG1200 are as follows: The installation specifications of the XG1200 are as follows: Appendix-A Specifications This section details the specifications of XG1200. A.1 Product Specifications Items Overview 10 Gigabit ports Port 1 - Port 12 IEEE802.3ae/ak c...