Fujitsu SS01-26006-2E - Manuals

Fujitsu SS01-26006-2E – Manual in PDF format online.

Manuals:

Manual

Manual Fujitsu SS01-26006-2E

Summary

Page 2 - PREFACE; Using the product safely

i PREFACE Thank you for purchasing the MCU board for F 2 MC*-8FX family MB95FV100-103 (model num- ber: MB2146-303).The MB2146-303 is a development support tool for developing and evaluating applied productsbased on the F 2 MC-8FX family of microcontrollers manufactured by Fujitsu. This manual is int...

Page 3 - Caution of the products described in this document; ii

ii ■ Caution of the products described in this document The following precautions apply to the product described in this manual. CAUTION Indicates a potentially hazardous situation which, if not avoided appropriately, may result in minor or moderate injury and/or damage to the product or the equipme...

Page 5 - MC-8FX Family of Fujitsu 8-bit microcontrollers. To build an F; Product configuration; ICE unit for F

1 1. Product Outline MB2146-303 is the MCU board (model number : MB2146-303) mounting an evaluation MCU inthe F 2 MC-8FX Family of Fujitsu 8-bit microcontrollers. To build an F 2 MC-8FX evaluation environ- ment, combine three products : the header board, MCU board, and BGM adapter (model number :MB2...

Page 6 - Appearance and part name; Figure 2 MCU board appearance figure; Checking the Delivered Product; MCU board

2 ■ Appearance and part name The appearance of a MCU board and the name of each part are shown in Figure 2. Figure 2 MCU board appearance figure 2. Checking the Delivered Product Before using the MCU board,confirm that the following components are included in the box: • MCU board : 1 • Operation man...

Page 7 - Procedure for connecting the user system; Connecting the MCU board to the header board

3 3. Procedure for connecting the user system ■ Connecting the MCU board to the header board Align the MCU board and the header board facing each other, then plug their mating connectors to-gether. The connectors are provided with incorrect insertion prevention guards located diagonally.Position the...

Page 8 - Note on connection; Figure 5 Connection direction of BGM adapter; Disconnection; force to only one point.; OK

4 ■ Note on connection • Be sure to connect the BGM adapter connector (CN3) correctly. The BGM adapter connector and the LVD2 detection voltage selector jumper plug have the same shape (see “Figure 5”). The MCU board may break if the BGM adapter connector is accidentally plugged into the LVD2 detect...

Page 9 - How to the switch and jumper plug on a MCU board setup; Figure 6 The switch and jumper plug on a MCU board

5 4. How to setup ■ How to the switch and jumper plug on a MCU board setup Please set the following switches referring to “Figure 6 The switch and jumper plug on a MCUboard”. 1. Set the clock selector switch (SW1-1) to ON or OFF to disable or enable the sub clock, respec- tively. 2. Set the C-pin se...

Page 10 - How to oscillator mounting on a MCU board

6 ■ How to oscillator mounting on a MCU board Mount the crystal or ceramic oscillator into the crystal oscillator mounting sockets (for the mainclock and sub clock) on the MCU board.The MCU board has one crystal oscillator mounting socket for the main clock and the other for thesub clock. To disting...

Page 11 - Setting of the Switch and Jumper Plug; Position of the switch and jumper plug

7 5. Setting of the Switch and Jumper Plug ■ Position of the switch and jumper plug The positions of the switch and jumper plug on a MCU board is shown in Figure 8, and specificationsare shown in Table 3. Figure 8 Positions of switches and jumper plugs on MCU board Table 3 Switch and Jumper plug set...

Page 13 - enable; B A

9 ■ Setting of the sub clock selector jumper plug (S1) Table 7 lists jumper plug positions and sub clock selection. Figure 10 shows the examples of subclock selection. Table 7 Setting of sub clock selector * : Oscillation is not guaranteed when the crystal oscillator is mounted on the user system. F...

Page 14 - Product Specifications; General specifications

10 6. Product Specifications ■ General specifications The general specifications of a MCU board is shown in Table 9. Table 9 General specifications ■ Functional explanation The functional specifications of a MCU board is shown in Table 10, and the functional block dia-gram is shown in Figure 12. Tab...

Page 15 - Figure 12 MCU board functional block diagram; Clock settings; Figure 13 shows the clock-related circuit diagram.

11 Figure 12 MCU board functional block diagram ■ Clock settings Figure 13 shows the clock-related circuit diagram. Figure 13 Clock selector circuit AVcc AVRAVss AVcc3 AVR3 Vcc C PG0 SEL4 SEL0SEL1SEL2SEL3 LVR0LVR1LVR2LVR3LVR4 LVDIN X0,X1 X0A,X1A LVDEN2 LVDEN LVDREXT APBEN (Reserved) Vcc,GND,BRSTX BS...

Page 16 - Connector socket specifications; Table 11 Connector and socket specifications

12 ■ Connector socket specifications The specifications of a connector and a socket is shown in Table 11. Table 11 Connector and socket specifications Item Description Header board interface connector Connects the MCU board to a header board. BGM adapter connector Connects the MCU board to the BGM a...

Page 17 - Pin assignment of header board I/F connector; Table 12 Pin assignment of header board I/F connector A

13 ■ Pin assignment of header board I/F connector Tables 12 and 13 lists the pin assignments of the header board interface connector on the MCUboard. Table 12 Pin assignment of header board I/F connector A Connector Pin Number Evaluation MCU Pin Number Signal line name Connector Pin Number Evaluatio...

Page 18 - Table 13 Pin assignment of header board I/F connector B

14 Table 13 Pin assignment of header board I/F connector B * : About power supply pins (common to connectors A and B) Connect the Vcc51, Vcc53 and Vcc54 pins to Vcc. Disconnect the LVCC pin from Vcc. Connect the Vss pin to GND. Disconnect the LVSS pin from GND. Connector Pin Number Evaluation MCU Pi...

Page 19 - Header board specifications; MCU board interface connector

15 ■ Header board specifications Figure 14 shows recommended dimensions of the header board connected to the MCU board. Table 14 lists general specifications of the header board. Figure 14 Recommended dimensions of the header board (Top view) Table 14 general specifications of the header board. Item...