Fujitsu S SERIES - Manuals

A26391-K144-Z120-1-7619, edition 2 3 Important notes Here you will find essential safety information regarding your notebook. The other notes provide useful information on your notebook. Safety notes ! Pay attention to the information provided in the "Safety" manual and in the following secu...

Important notes A26391-K144-Z120-1-7619, edition 2 5 Notes on installing and removing boards and modules ! Only qualified technicians should repair the device. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk). Boards with electrostatic sensitive devi...

Important notes 6 A26391-K144-Z120-1-7619, edition 2 Energy saving If you will not be using your notebook, switch it off. Make use of the device's energy saving functions (see "Working with the notebook"). The notebook uses less power when the power management features are enabled. You will ...

Important notes A26391-K144-Z120-1-7619, edition 2 7 Transporting the notebook Please observe the points listed below when transporting your notebook. Before you travel ● Back up important data stored on your hard disk. ● Switch off the radio component (Wireless LAN/ Bluetooth) for security reasons ...

Important notes 8 A26391-K144-Z120-1-7619, edition 2 Cleaning the notebook ► Switch the notebook off. ► Pull the power plug of the network adapter out of the mains outlet. ► Remove the battery. ! Do not clean any interior parts yourself; leave this job to a service technician. Do not use any cleanin...

A26391-K144-Z120-1-7619, edition 2 9 Preparing the notebook for use ! Observe the relevant notes in the "Important notes" chapter and in the manual about your radio component. You must charge the battery and install the application programmes before you can work with the notebook. The operat...

Preparing the notebook for use 10 A26391-K144-Z120-1-7619, edition 2 Connecting the power adapter ! Please take note of the information in the section "Selecting a location". The power cable supplied conforms to the requirements of the country in which you purchased your notebook. Make sure ...

Preparing the notebook for use 12 A26391-K144-Z120-1-7619, edition 2 Switching on the notebook for the first time ! When you switch on your notebook for the first time, the supplied software is installed and configured. Due to the fact that this installation must not be interrupted, you should set a...

A26391-K144-Z120-1-7619, edition 2 13 Working with the notebook This chapter describes the basics for operating your notebook. Please see the "Connecting external devices" chapter for instructions on how to connect devices such as a mouse and a printer to the notebook. ! Please take note of ...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 15 Switching off the notebook ► Close all programmes and shut down your operating system (please see operating system manual). i If the notebook cannot be shut down properly, press the Suspend/Resume button for approx. four seconds. The no...

Working with the notebook 16 A26391-K144-Z120-1-7619, edition 2 Indicators The status indicator panel is a small LCD panel on which various symbols appear. These symbols provide information about the status of the power supply, the drives, and the keyboard functions. Power-on indicator Hard disk ind...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 19 Keyboard i The keyboard of your notebook is subject to continuous wear due to normal use. The keyboard markings are subjected to particularly high loads. The keyboard markings can wear off in the course of using the notebook. The keyboa...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 21 Virtual numeric keypad The keyboard of your notebook does not have a separate number block. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric...

Working with the notebook 22 A26391-K144-Z120-1-7619, edition 2 Key combinations The following description of key combinations refers to functions when using Microsoft Windows. Some of the following key combinations may not function in other operating systems and with some device drivers. Key combin...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 23 Easy Launch keys Your notebook is equipped with four configurable Easy Launch keys. Enter 4 3 2 1 1 = Key 1 This key could be preset. However, you can also configure this key as desired. 2 = Key 2 This key could be preset. However, you ...

Working with the notebook 24 A26391-K144-Z120-1-7619, edition 2 Touchpad / TouchStick and touchpad buttons 4 1 2 3 1 = TouchStick 2 = Touchpad 3 = Touchpad buttons 4 = Touchpad scroll button Your notebook offers a Touchpad (and as an option also a TouchStick) for mouse control. You can move the poin...

Working with the notebook 26 A26391-K144-Z120-1-7619, edition 2 LCD screen Information on LCD monitor High-quality TFT displays are installed in notebooks from Fujitsu Siemens Computers GmbH. The specification of the monitor resolution indicates how many pixels can be displayed. For example, "XG...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 27 Battery The battery supplies your notebook with the necessary power during mobile use. You can increase battery life by enabling the system's power management features. The battery charge is indicated by the battery symbol in the status...

Working with the notebook 28 A26391-K144-Z120-1-7619, edition 2 Monitoring the battery charging level The battery charge is indicated by the battery symbol in the status indicator panel (see the section "Indicators"). Power management includes a "battery charge meter" located in the ...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 29 Inserting battery 2 1 ► Position the battery at the edge of the casing. ► Push the battery into the battery slot until you feel it locking into place (1). ► Push the battery lock in the direction of the arrow up to the stop (2). Hard di...

Working with the notebook 30 A26391-K144-Z120-1-7619, edition 2 Module The design of your notebook enables the flexible use of notebook batteries and drives. The following modules can be operated in the module slot of your notebook: ● Hard disk drive ● DVD-ROM drive ● Combo drive (CD-RW/DVD) ● DVD+R...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 31 Removing module ► Place the notebook on a flat surface. 1 2 ► Pull the eject lever (1) in the direction of the arrow up to the stop. The module now extends somewhat beyond the casing. ► Pull the module (2) out of the module bay.

Working with the notebook 32 A26391-K144-Z120-1-7619, edition 2 Installing module ► Place the module into the module bay so that the contacts enter first. ► Push the module into the module bay until you feel it locking into place.

Working with the notebook A26391-K144-Z120-1-7619, edition 2 33 Optical drive Depending on the version, your notebook is equipped with a DVD-ROM drive, a combination drive (CD-RW/DVD) or a DVD+RW drive. You can replace your optical drive with another drive, a battery or a "Weight Saver" (see...

Working with the notebook 34 A26391-K144-Z120-1-7619, edition 2 Inserting or removing a CD/DVD The notebook must be switched on. 2 1 ► Push the insert/eject button (1). The drive tray will open. ► Pull the drive tray all the way out (2). ► Place the CD/DVD in the drive tray with the label facing upw...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 37 PC cards Two PC card slots (CardBus or PCMCIA) enable the notebook to operate two type I or type II PC cards or one type III PC card. ! Consult the documentation supplied by the PC card's manufacturer and follow the instructions provide...

Working with the notebook 38 A26391-K144-Z120-1-7619, edition 2 Removing a PC card 2 1 ► Press the eject button (1). The PC card will project further out of the notebook's case. If the eject button is lowered, you must first cause the eject button to release from the notebook casing. Press the eject...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 39 Loudspeakers 1 1 1 = built-in loudspeakers Two loudspeakers (1) are installed in your notebook. The internal loudspeakers switch off when you attach headphones or external loudspeakers to the audio jack. Integrated 56k modem The integra...

Working with the notebook 40 A26391-K144-Z120-1-7619, edition 2 The modem can be operated in the following countries: Multifrequency (MFC) dialling: Belgium, Denmark, Germany, Finland, France, Greece, Great Britain, Holland, Ireland, Iceland, Italy, Luxembourg, Norway, Austria, Portugal, Sweden, Swi...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 41 Wireless LAN/ Bluetooth Depending on the device variant, wireless LAN/ Bluetooth may be integrated in your notebook. The wireless LAN/ Bluetooth module is switched off in the delivered state. Switching wireless LAN/ Bluetooth module on ...

Working with the notebook 42 A26391-K144-Z120-1-7619, edition 2 Ad hoc mode A wireless LAN in the ad hoc mode, also called peer-to-peer mode, consists of a single closed cell. Ad hoc wireless networks result when a workgroup comes together with its systems and would like to interconnect these for da...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 43 Connecting the notebook to the Port Replicator ! It is not permissible to connect the notebook to the Port Replicator during operation. i When the notebook is connected to the Port Replicator, you should not connect the power adapter to...

Working with the notebook 44 A26391-K144-Z120-1-7619, edition 2 Switching on notebook via Port Replicator 2 1 ► Press the Suspend/Resume button (1) of the Port Replicator. The power-on indicator (2) of the Port Replicator lights up. ! After switch-on a self-test (POST, Power On Self Test) is automat...

Working with the notebook A26391-K144-Z120-1-7619, edition 2 45 Disconnecting the notebook from the Port Replicator ! It is not permissible to disconnect the notebook from the Port Replicator during operation. ► Switch the notebook off. ► Unplug the power adapter from the mains outlet. 1 2 ► Press t...

A26391-K144-Z120-1-7619, edition 2 47 Security functions Your notebook enables you to protect your system and personal data in a number of ways against unauthorised access. By combining these options, you can achieve maximum protection for your system. In this chapter you will learn which security f...

Security functions 48 A26391-K144-Z120-1-7619, edition 2 BIOS password protection You can protect you personal data from unauthorised access with various passwords. By combining these different options, you can achieve maximum protection for your system. Password protection for the BIOS setup With t...

Security functions A26391-K144-Z120-1-7619, edition 2 49 Brief overview of the security functions Security function Type of protection Preparation Kensington Lock Mechanical Mount and lock Kensington MicroSaver (accessory) Security panel Hardware password protection with Supervisor and User password...

Security functions 50 A26391-K144-Z120-1-7619, edition 2 Using Kensington Lock on notebook With the Kensington MicroSaver, a sturdy steel cable, you can protect your notebook from theft. For this reason your notebook is equipped with a device for the Kensington MicroSaver. The Kensington MicroSaver ...

Security functions A26391-K144-Z120-1-7619, edition 2 51 Using Kensington Lock on Port Replicator With the Kensington MicroSaver, a sturdy steel cable, you can protect your Port Replicator from theft. For this reason your Port Replicator is equipped with a device for the Kensington MicroSaver. The K...

Security functions 52 A26391-K144-Z120-1-7619, edition 2 Configuring Security Panel When you put your notebook into operation for the first time, the Security Panel is not activated yet. Assign the necessary passwords with the programs FJSECS.EXE (Supervisor password) and FJSECU.EXE (User password)....

Security functions A26391-K144-Z120-1-7619, edition 2 53 An example: Here the combination 2, 3 was selected in the first line, the number 4 in the second line, the combination 1, 3 and 4 in the third line, the number 2 in the fourth line and finally the combination 1, 2, 3 and 4 in the fifth line. I...

Security functions 54 A26391-K144-Z120-1-7619, edition 2 Password error alarm If the password is entered incorrectly three times, a one-minute alarm is triggered. If the correct password is still entered during the alarm, the notebook boots as usual. After one minute the notebook stops the alarm. Th...

Security functions A26391-K144-Z120-1-7619, edition 2 55 Set the supervisor and user password ► Call BIOS Setup and select the Security menu. ► Mark the Set Supervisor Password field and press the Enter key. With Enter new Password: you are then requested to enter a password. ► Enter the password an...

Security functions 56 A26391-K144-Z120-1-7619, edition 2 Password protection for starting the operating system i With the supervisor password or the user password, you have assigned in the BIOS Setup (see section "Set the supervisor and user password"), you can also prevent booting of the op...

Security functions A26391-K144-Z120-1-7619, edition 2 57 Password protection for hard disk i The had disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor p...

Security functions 58 A26391-K144-Z120-1-7619, edition 2 Configuring and using SmartCard reader 1 2 1 = PC card slot with SmartCard Interface 2 = SmartCard holder 1 + 2 = SmartCard reader To use the SmartCard reader, you must install a SmartCard holder in your notebook. The SmartCard holder is conta...

Security functions A26391-K144-Z120-1-7619, edition 2 59 Configuring SmartCard reader ! Do not use force when installing and removing the SmartCard holder. Make sure that foreign objects do not fall into the SmartCard holder. ► Insert the SmartCard holder in the lower slot guide with the connection ...

Security functions 60 A26391-K144-Z120-1-7619, edition 2 Installing drivers Windows will detect the installed SmartCard holder as new hardware and will search for the chip driver. The driver is provided on the "Security Drivers & Tools" CD, which is also included with the "Mobile Sec...

Security functions A26391-K144-Z120-1-7619, edition 2 61 Inserting the SmartCard ! Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard holder. ► Slide the SmartCard into the SmartCard reader with the chip facing upward and at the ...

Security functions 62 A26391-K144-Z120-1-7619, edition 2 Application examples SmartCard as device protection After you insert the SmartCard, you are prompted in the logon screen to enter your PIN. Upon correct entry the SmartCard is checked and the operating system is booted. The SmartCard remains i...

Security functions A26391-K144-Z120-1-7619, edition 2 63 SmartCard as system protection (SystemLock) With SystemLock , the notebook can only be started with an initialised SmartCard (SICRYPT or CardOS) and personal identification number (PIN). SmartCard and PIN are already checked during system boot...

Security functions 66 A26391-K144-Z120-1-7619, edition 2 Troubleshooting Security panel You have forgotten your password or passwords. If you have forgotten the user password, you can reset the forgotten user password and specify a new user password with the supervisor password. If the Security pane...

A26391-K144-Z120-1-7619, edition 2 67 Connecting external devices ! Under all circumstances, please observe the safety notes provided in the "Important notes" chapter. Read the documentation on the external device before connecting it. Do not connect or disconnect cables during a thunderstor...

Connecting external devices 68 A26391-K144-Z120-1-7619, edition 2 Connections on notebook 1 2 34 5 6 1 = DC jack (DC IN) 2 = Monitor port (with port cover folded open) 3 = FireWire port 4 = Line In socket 5 = Microphone jack 6 = Headphones port i When the notebook is connected to the Port Replicator...

Connecting external devices 70 A26391-K144-Z120-1-7619, edition 2 Ports on the Port Replicator 1 2 3 4 5 6 7 8 9 1 = LAN connector 2 = Serial port 3 = DVI-D port (digital) 4 = Monitor port (analogue) 5 = Parallel port 6 = PS/2 port (for keyboard or mouse) 7 = USB ports 8 = Headphones port 9 = Microp...

Connecting external devices A26391-K144-Z120-1-7619, edition 2 71 Connecting an external monitor to the notebook An external monitor can be connected to the notebook. The notebook graphics card supports extended XGA resolutions up to 1600 x 1200 and 16.7 million colours at 85 Hz. Using the Fn + F10 ...

Connecting external devices 72 A26391-K144-Z120-1-7619, edition 2 Setting the refresh rate for your external monitor The refresh rate must be correctly set so that the image does not flicker. ► Select the monitor type in the menu Start - Control Panel - Appearance and Themes - Display - Settings - A...

Connecting external devices A26391-K144-Z120-1-7619, edition 2 73 Connecting USB devices On the USB ports you can connect external devices that also have a USB port (e.g. a printer, a scanner or a modem). i USB devices are hot-pluggable. This allows cables from USB devices to be connected and discon...

A26391-K144-Z120-1-7619, edition 2 75 Memory expansion Your notebook has 256 Mbyte - 2 Gbyte of main memory installed, depending on the upgrade level. The notebook will not start without memory modules, as no fixed main memory is installed. Installing and removing the memory extension ! Please note ...

A26391-K144-Z120-1-7619, edition 2 79 Energy saving functions The notebook uses less power when the power management features are enabled. You will then be able to work for longer before having to recharge the battery. ! Never switch the notebook off with the Suspend/Resume button while the notebook...

A26391-K144-Z120-1-7619, edition 2 81 Settings in BIOS Setup In BIOS Setup you can set the system functions and the hardware configuration of the notebook. The settings can only be changed via the keyboard. When it is delivered, the notebook is set to factory default settings. You can change these s...

Settings in BIOS Setup 82 A26391-K144-Z120-1-7619, edition 2 Operating BIOS Setup i Press the F1 key to display help on the operation of BIOS Setup . The description of the individual settings is shown in the right-hand window of the BIOS Setup . You can revert to the default settings for the BIOS S...

A26391-K144-Z120-1-7619, edition 2 83 Troubleshooting and tips ! Take note of the safety hints in the "Important notes" chapter, when you connect or disconnect cables. If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of ...

Troubleshooting and tips 84 A26391-K144-Z120-1-7619, edition 2 The notebook's date or time is incorrect ► Double-click on the clock in the task bar and adjust the time. or ► Set the time and/or date in the BIOS Setup menu Main . i If the date and time are repeatedly incorrect when you switch on the ...

Troubleshooting and tips A26391-K144-Z120-1-7619, edition 2 85 The external monitor stays blank If your screen remains blank this may be due to the following: Monitor is switched off ► Switch the external monitor on. Power saving has been activated (screen is blank) ► Press any key to continue. Brig...

Troubleshooting and tips 86 A26391-K144-Z120-1-7619, edition 2 The notebook cannot be started If the notebook does not start after switch on, this may be due to one of the following: The battery is not installed correctly ► Switch the notebook off. ► Check whether the battery is installed correctly ...

Troubleshooting and tips A26391-K144-Z120-1-7619, edition 2 87 The mouse does not work If the connected mouse does not work, it can have the following reasons: Touchpad driver is not installed properly ► Deinstall the touchpad driver. ► Install the actual driver from the "Drivers & Utilities...

Troubleshooting and tips 88 A26391-K144-Z120-1-7619, edition 2 Error messages on the screen This section describes the error messages generated by the BIOS Setup . Error messages displayed by the operating system or programmes are described in the relevant documentation. CMOS Battery Bad If the erro...

A26391-K144-Z120-1-7619, edition 2 91 Technical data Notebook Processor: Intel Pentium M from 1.5 or Celeron from 1.3 GHz Main memory: Maximum 2 Gbyte DDR333 SDRAM DIMM 2 slots for 256, 512-Mbyte modules or 1-Gbyte modules Possible modules: ● Hard disk drive ● DVD-ROM drive ● Combo drive (CD-RW/DVD)...

Technical data A26391-K144-Z120-1-7619, edition 2 93 Power adapter 60 W Main ● Rated voltage: 100 V to 240 V (automatic) ● Frequency: 50 Hz to 60 Hz (automatic) Sub ● Rated voltage: 19 V ● Max. rated current: 3.16 A You can readily order an additional power adapter and an additional power cable. Pow...

A26391-K144-Z120-1-7619, edition 2 95 Manufacturer’s notes Recycling and disposal Do not throw batteries or accumulators into the household waste. Our devices are mostly produced of materials that can be turned over for proper recycling. The device may be taken back after use to be recycled, provide...

Manufacturer’s notes 96 A26391-K144-Z120-1-7619, edition 2 CE marking CE marking for devices without wireless LAN/ Bluetooth The shipped version of this device complies with the requirements of the EEC directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage direc...

Manufacturer’s notes 100 A26391-K144-Z120-1-7619, edition 2 UL Notice This unit requires an AC adapter to operate. Use only UL Listed Class 2 adapter, output rating 19 V DC, 4.22 A. Refer to the illustration below for the correct AC Adapter output polarity: ! CAUTION: To reduce the risk of fire, use...

A26391-K144-Z120-1-7619, edition 2 103 Index 56k modem 39 A Acoustic warnings 87 Alt Gr key 20 Anti-theft protection 50, 51 Application Panel 23 Audio devices, connecting 73 Audio ports 73 B Backtab 22 Battery charge metre 28 charging 27 charging indicator 17 indicator fails to light 84 first batter...