Fujitsu P-TE1010E - Manuals

Page 2 - SAFETY PRECAUTIONS; IMPORTANT INFORMATION; IMPORTANT; FCC NOTICE; IMPORTANT SAFETY INSTRUCTIONS

E-2 SAFETY PRECAUTIONS IMPORTANT INFORMATION IMPORTANT WARNING: This is a Class B product. In a domestic environment this product may cause radio interference inwhich case the user may be required to take adequate measures. WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THISPR...

Page 3 - English

E-3 English 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rainor moistur...

Page 4 - FEATURES; Variety of input signals; Desired screen size; Convenient power saving setting; Others

E-4 FEATURES Variety of input signals • In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high definition picture quality. • Depending on the model, the display supports video input for different colour television systems as fol...

Page 5 - ACCESSORIES; CHECKING ACCESSORIES; HANDY TIPS; Warning

E-5 English ACCESSORIES Information Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. CHECKING ACCESSORIES HANDY TIPS • Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a pr...

Page 6 - INSTALLATION

E-6 INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealerperforms the ...

Page 7 - PART NAMES AND FUNCTIONS; DISPLAY SECTION – FRONT

E-7 English PART NAMES AND FUNCTIONS ⑨ ① ② DISPLAY SECTION – FRONT 1 Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by Lit (green): Power ON Lit (orange): Power saving (DPMS: Power savingfunction) mode ON (See P. E-38.) Flashing (red): Malfunction (Flashes diffe...

Page 8 - DISPLAY SECTION – LOWER PART; Videoboard

E-8 PART NAMES AND FUNCTIONS (Continued) DISPLAY SECTION – LOWER PART 1 /I power switch When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON ” state, and the power can be turned“ON” or “OFF” by the remote control or on the control panel of the d...

Page 10 - REMOTE CONTROL

E-10 PART NAMES AND FUNCTIONS (Continued) REMOTE CONTROL For details, see page . 1 button Switches between power ON and standbystate. 3 DISPLAY OFF button For showing on-screen-information. 4 PICTURE MODE button Switches the picture mode. 7 RGB input mode selector button[RGB 1 – 3] Selects RGB 1 – 3...

Page 11 - PUTTING BATTERIES IN THE REMOTE CONTROL; PRECAUTIONS; USING THE REMOTE CONTROL

E-11 English PUTTING BATTERIES IN THE REMOTE CONTROL 1 To remove the cover, slide itoutwards while pressing it down. 2 Place two AA batteries in theremote control. Make sure that thebatteries are properly oriented. 3 Close the cover until it snaps intoplace. Note The remote control will not function...

Page 12 - EFFECTIVE RANGE FOR THE REMOTE CONTROL; Display – front

E-12 EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver. USING THE REMOTE CONTROL (Continued) Information The remote control may not functio...

Page 13 - RECEPTACLE; CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT; Ferrite cores

E-13 English CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PCmodel. Con...

Page 14 - CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued); EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS; VCR or other external components See P.

E-14 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Remotecontrol Display Speaker (optional) Speaker VCR or other external components See P. VCR E-15 DVD player Satellite tuner E-17 PC E-18 E-P42VHA10E-OV(14̲18) 03.1.16, 11:50 Page 14 Adobe Pag...

Page 15 - VCR; An example of the underside of the display

English E-15 VCR • Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.) • Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.) To SCART output To SCART input An example of the underside of th...

Page 16 - DVD PLAYER

E-16 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) DVD PLAYER • Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)• Connect the video signal cable to the component video input terminal, S-video input terminal, or...

Page 17 - SATELLITE TUNER

English E-17 SATELLITE TUNER • Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P- TE10...

Page 18 - PC

E-18 PC • As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.• The PC can be connected to either the front side or the rear side, whichever is most convenient. To RGB output (mD-sub) To audio output To RGB output (DVI...

Page 19 - TURNING THE POWER ON AND OFF; BASIC OPERATIONS

English E-19 * You can also use the buttons on the display’s controlpanel to perform these steps. TURNING THE POWER ON AND OFF 1 2 3 Press /I to the left at the bottomof the display. The power lamp lights up. Press on the remote control. The colour of the power lamp changes from “Red”to “Green”. Pre...

Page 20 - SELECTING INPUT MODE; RGB INPUT MODE; Press the; VIDEO INPUT MODE; Press

E-20 SELECTING INPUT MODE RGB INPUT MODE 1 RGB1 mode Press the – buttons to select the input mode. You can select from VIDEO1 mode to VIDEO4mode. The video modes corresponding to each inputterminal are as follows. • VIDEO1: SCART (when P-TE1000E is installed), Video (when P-TE1010E is installed) • V...

Page 21 - OTHER BASIC OPERATIONS; CONVENIENT FUNCTIONS

English E-21 OTHER BASIC OPERATIONS CONVENIENT FUNCTIONS On-screen information (DISPLAY) Press . The mode is indicated on the screen for 5 seconds. Picture Mode (PICTURE MODE) Press . This button can be used to switch the picture mode. In the picture mode, you can switch between the set status and t...

Page 22 - WATCHING PICTURES ON THE WIDE SCREEN; SWITCHING BETWEEN SCREEN SIZES

E-22 WATCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. • A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height)...

Page 23 - SCREEN SIZE; Normal

E-23 English Information You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or CinemaVision size i.e., the sizes used frequently for picture software. SCREEN SIZE ASPECT RATIO The following aspect ratios are avail...

Page 24 - ADJUSTMENT MENU; MENU

E-24 ADJUSTMENT MENU ADJUSTMENT MENU MENU PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT Contrast Brightness Colour Tint Sharpness Picture Mode PrecisionSetting Noise Reduction * Picture Memory Luminance Black Level Colour Temp. User Colour Temp. Position Size Treble Bass Balance Loudness Adju...

Page 29 - Setting Range

E-29 English Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. : Moves screen to the left. Vertical position (Vertical) : Moves screen up. : Moves screen down. Press to store. Adjusting Screen Size (Size) Screen width (Width) : Increases width. : Redu...

Page 33 - ADJUSTMENT

English E-33 • FEATURES setup screen has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Allows setting of 24-frame mode. (See P. E-34.) On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.) Input ...

Page 34 - ON SCREEN MENU; FUNCTION

E-34 OTHER ADJUSTMENTS (FEATURES MENU) (Continued) • Setting Display Information (OSD) You can use this option to select whether to display information other than menus. (Error messagesare displayed regardless of what choice you make for this option.) Each time you press or , one of the available ch...

Page 35 - SETTING THE INPUT TERMINALS

English E-35 * On-screen information disappears if you do not take any action for about 60 seconds. SETTING THE INPUT TERMINALS • Video Input (when the P-TE1000E is installed) Function Select the video input format. Each time is pressed, the setting is switched. Select the desired input. Press to st...

Page 38 - OTHER SETTINGS

E-38 OTHER ADJUSTMENTS (FEATURES MENU) (Continued) OTHER SETTINGS DPMS for other than RGB1 You can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display power management signaling”) allows the display to maintain anautomatic power saving functi...

Page 41 - INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)

English E-41 INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT) 1 “FACTORY DEFAULT” selected in themain menu screen Displays the message of whether toproceed the initialization Displays the message of havingcompleted the initialization You can restore the values of the adjustment/setting made...

Page 42 - OPTIONS

E-42 OPTIONS Wall-mounting unit 0° to 15° mounting angle P-WB4200 Hanging unit 0° to 15° mounting angle P-CT4200 Stand P-TT4200 Speaker P-SP4200 (for 42”)P-SP5000 (for 50”)(1 set of 2 speakers) Speaker Stand P-ST4200 (for 42”)P-ST5000 (for 50”)(1 set of 2 speakers stands) * When installing an option...

Page 43 - Remove the plate attached to the bottom rear of the main unit from; Connecting the signal input cable

English E-43 INSTALLATION 1. Turn the power supply switch to OFF. 2. Remove the power plug from outlet. 3. Remove the plate attached to the bottom rear of the main unit from the Video board unit mounting bracket (3 mm screw w/spring X 3). 4. Insert the Video board unit into the main unit slot using ...

Page 44 - FACTORY SETTINGS

E-44 FACTORY SETTINGS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment valueof the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-2...

Page 45 - SPECIFICATION

English E-45 SPECIFICATION Model P42VHA10E Screen size 42" wide screen:92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) Weight 28.5 kg / 62.8 lbs Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm40.8 (W) x 25.3 (H) x 3.3 (D...

Page 47 - CLEANING AND MAINTENANCE; Precautions

E-47 English CLEANING AND MAINTENANCE Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection.• Check whether the power for all input equipment is ON.• Check for connection to wrong terminals or for wrong input mode.• Check whether the input m...