Fujitsu MB9B300A - Manuals

AN706-00044-1v0-E 2 System requirements The GUI software supported environment on PC 2.1 Supported Operating Systems: Windows Server 2003, Windows Server 2008, Windows Vista, Windows XP, Windows 7 1. Microsoft Windows XP Service Pack 2 or Service Pack 3 Minimum of 192 MB of RAM (384 MB preferred) At...

AN706-00044-1v0-E 3 Install GUI Install the GUI software in your PC This FUJITSU’S FM3 Inverter Platform GUI is given by compressed file, please copy and unzip the “FUJITSU’S FM3 Inverter platform GUI.zip” file to your PC. Then, you will find 10 files in the “FUJITSU’S FM3 Inverter platform GUI” fol...

AN706-00044-1v0-E 4 Simply install steps about the communication Driver A simply install steps for the FTDI. 4.1 To install FTDI driver in Windows XP Simply install steps: 1. Connect the FTDI device (board) to a USB port on the PC. 2. New Hardware Wizard will launch. 3. Select "Install from a li...

AN706-00044-1v0-E 5 How to use the GUI Introduce the GUI software 5.1 Overview This GUI use to cooperate with the FUJITSU’S FM3 inverter platform, customer can use this GUI to: 1. Real-time control the motor and PFC module function; 2. Real-time setting the motor functions and parameters; 3. Real-ti...

AN706-00044-1v0-E 5.3 GUI Startup Open the folder; double click the “ ARMInverterPlatform.exe ” to run the software, as Figure 5.2. Figure 5-2: GUI files 9

AN706-00044-1v0-E 5.4.2 Main window - Name : Main window - Function: connect control, start/stop control, function/parameter setting, Constant/variable observation, language setting, and current state. Figure 5-4: main window Table 5-1: main window function Name of button Specification 1 Connect Ini...

AN706-00044-1v0-E Table 5-4: wave observer function Name of area Description 1 Form name Custom the name of this wave window. 2 Show wave Draw the wave of signal needing to show. 3 Waveform name Shown the waveform name, it’s come from select signal 4 Select signal Select the signal to show the wave ...

AN706-00044-1v0-E 5.4.6 Variable window - Name :                   variable observation window. - Function: show the signal value, select signal. 2 1 Figure 5-8: variable observation window Table 5-5: variable observation function Name of area Specification 1 Variable value Show the value form hardw...

AN706-00044-1v0-E 5.5 Example of total operating Procedure This chapter introduces the operating method of GUI. 5.5.1 Hardware preparation Before operating GUI, prepare hardware according to the following procedure. 1. Install the FTDI driver (Only once) 2. Prepare the hardware environment 3. Connec...

AN706-00044-1v0-E (2) Start running the motor Next, click Compressor Start-stop Control button in Main Window to start the motor (1 in the Figure 5-11 ). If succeeds, the color of Compressor Start-stop Control button changes from green to red. The button text changes from Run to Stop . 1 Figure 5-11...

AN706-00044-1v0-E (4) Show the wave To display the waveform, click Graphic button in Main Window (1 in Figure 5-14 ), and the Graphic Window in Figure 5-15 is displayed. 1 Figure 5-14: operation: open the wave window 30

AN706-00044-1v0-E 6 Appendix 6.1 Particular Install steps about the communication Driver 6.1.1 To install FTDI device in Windows XP - Copy and unzip the FTDI driver on the PC. - Connect the device to spare USB port on the PC. If the device is based on the FT2232, the Microsoft composite device drive...

AN706-00044-1v0-E - Open the Device Manager (located in "Control Panel¥System" then select the "Hardware" tab and click "Device Manger") and select "View > Devices by Connection", the device appears as a "USB Serial Converter" with an additional COM port wi...

AN706-00044-1v0-E Figure 6-16 - t the next screen select Device Manager: Figure 6-17 - In the Device Manager window there will be a device under Other Devices with a A yellow warning symbol to indicate a problem ie no driver installed. The text next to this device will depend on the device attached....

AN706-00044-1v0-E Figure 6-18 - Right click on the other device (TTL232R in this example) to bring up a menu as shown below. Figure 6-19 From the displayed menu select “Update Driver Software…” This then displays the option for an automatic search or a manual search. 44

AN706-00044-1v0-E Figure 6-26 - Select the second option to browse manually. Figure 6-27 51

AN706-00044-1v0-E In the address box put the exact location where the drivers have been saved to. This may be on a CD or in a folder on the PC. It is not necessarily the exact same location as shown in the screenshot. The drivers could have been saved anywhere of the users choosing. - After entering...

AN706-00044-1v0-E 55 6.2 Motor parameter item Table 6-1: motor parameter Motor parameter name Unit Init Value compressor model - DA89 pole pairs Pole pairs 2 Ld mh 8.8 Lq mh 14.4 target rotational speed Hz 30 target Speed RPM 1800 KP for Id （ KD ） - 0.8 KI for Id （ ID ） - 0.01 KP for Iq （ KQ ） - 0.8...