Fujitsu H22-1W - Manuals

Introduction Your new LCD (Liquid Crystal Display) monitor SCALEOVIEW H22-1W offers numerous features and functions, for example: ● TFT display (Thin Film Transistor; active matrix) ● minimal space requirements thanks to slim casing ● optimum ergonomic characteristics (totally distortion-free, excel...

SCALEOVIEW H22-1W Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. ! i Supplementary inform...

SCALEOVIEW H22-1W ● The monitor is equipped with a power cable that complies with safety standards. ● Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the "Connecting the monitor" chapter. ● If you use a different dat...

SCALEOVIEW H22-1W Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused by unauthorised modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. The c...

SCALEOVIEW H22-1W Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a con...

SCALEOVIEW H22-1W Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. 1 1 2 1 = Windows Avoid direct and reflected glare. Avoid glare fro...

SCALEOVIEW H22-1W Mounting and removing the monitor base Mounting monitor base When delivered the lower section of the monitor base is removed. ► Push the lower section of the monitor base (2) in the upper section (1). ► Fasten the screw (3). Removing monitor base Before you can use a swivel arm or ...

SCALEOVIEW H22-1W ► Remove the cover (3) and disconnect all cables. ► Remove the two screws under the covers (1 and 2). You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 100 mm hole spacing. For instructions on how to mount the swivel arm or wall bracket, please see the docume...

SCALEOVIEW H22-1W ► If necessary, insert one plug of the USB cable in the USB port (10) on the monitor and make sure it is properly engaged. ► Plug the power cable supplied into the power connector (1) of the monitor. ► Mount the cover over the connections. A lock (Kensington Lock) can be mounted in...

SCALEOVIEW H22-1W ► Plug the power connector of the computer into a properly grounded mains outlet. When you start working with your monitor for the first time you should install the appropriate graphics drivers for your application software. Details of how to do this are provided in the documentati...

SCALEOVIEW H22-1W When you switch the computer system on, you must proceed in the following order: ► First switch on the LCD monitor with the ON/OFF switch (2). ► Then switch on the computer. If your computer has a power management function (energy-saving mode), you should read the "Notes on pow...

SCALEOVIEW H22-1W Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Basic monitor settings with the CD supplied If one of the operating sys...

SCALEOVIEW H22-1W The following settings are offered: Optimal recommended color enhance mode setting by input Office suitable and optimised for word processing Photo suitable and optimised for photo editing Video suitable and optimised for videos Games suitable and optimised for games Activating/dea...

SCALEOVIEW H22-1W Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the f...

SCALEOVIEW H22-1W Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted...

SCALEOVIEW H22-1W Technical data Dimensions and weight (LCD monitor) Visible diagonals: 56 cm Dot pitch: 0.28 mm (H) x 0.28 mm (V) Screen size: 473.76 mm x 296.1 mm Maximal resolution: 1680 x 1050 Dimensions (W x H x D) incl. monitor base: Dimensions box (W x H x D): 513.72 mm x 444.79 mm x 219.82 m...

SCALEOVIEW H22-1W Environmental conditions Environment class 3K2, IEC 721 Rated range of operation: Humidity: 15 °C .... 35 °C 20 % .... 85 % Limit range of operation: Humidity: 5 °C .... 35 °C 20 % .... 85 % Condensation must be avoided. VESA-DDC / CI 1.1-compatible VGA interface Your monitor is eq...

SCALEOVIEW H22-1W Video mode Resolution V-Freq [Hz] H-Freq [kHz] Pixel Rate [MHz] HS- pol VS- pol Remark 1 640 x 480p 60 31.469 25.175 N N NSTC 2 720 x 480i 60 15.734 27.000 N N All inputs 3 720 x 480p 60 31.469 27.000 N N HDTV: Component, DVI, HDMI 4 720 x 576i 50 31.250 27.000 N N All inputs 5 720...

SCALEOVIEW H22-1W Pin assignment D-SUB 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 +5 V (DDC) 2 Video input green 10 Sync. earth 3 Video input blue 11 Earth 4 Earth 12 DDC-Data 5 Earth 13 H. sync 6 Red video earth 14 V. sync 7 Green video earth 15 DDC Clock 8 Blue video earth Pin assi...