Fujitsu FMW4503TS128A01 - Manuals

vi List of Figures Figure 3-1 BIOS Setup Screen ............................................................................................................................... 6 Figure 4-1 Installing a PC Card .............................................................................................

vii List of Tables Table 3-1. BIOS Setup Main Menu Options ......................................................................................................... 8 Table 3-2. BIOS Setup Primary Master Configuration Options .............................................................................

viii About This Guide This guide provides technical information on the Fujitsu Stylistic 3500 pen tablet computer for technicians, hardware developers, and software developers. Organization 0 This guide is organized as follows: • Chapter 1: Pen Tablet Features This chapter discusses some of the syst...

Related Documentation ix Related Documentation 0 Documentation relating to the Stylistic 3500 pen tablet system is listed below. Refer to these documents for details on topics not covered in this guide. Stylistic 3500 User ’s GuideThis guide provides an introduction to the Stylistic 3500 pen tablet’...

Technical Support x details including: cable requirements, topology, and USB power distribution. This specification and other technical documents regarding USB are available on the Universal Serial Bus Implementer ’s Forum home page at <http://www.usb.org/>. Desktop Management Interface (DMI) ...

1 Chapter 1 Pen Tablet Features This chapter provides an introduction to the Stylistic 3500 pen tablet system hardware and gives an overview of some of the pen tablet system’s features. Detailed specifications on the features discussed in this chapter are given in other chapters of this guide. The S...

Supported Operating Systems 2 Chapter 2 System Software This chapter outlines system software supported on the Stylistic 3500 pen tablet including operating system software, and drivers and utilities developed specifically for the Stylistic 3500 pen tablet system. Supported Operating Systems 2 The S...

Pen Configuration 4 Chapter 3 Configuring the Stylistic 3500 Pen Tablet System This chapter provides instructions on how to use various configuration utilities to configure the Stylistic 3500 pen tablet BIOS. Pen Configuration 3 Windows 98 and Windows 2000 systems include a pen configuration control...

BIOS Setup 5 BIOS data resides in the system’s CMOS memory. When the system is powered on, BIOS data is copied or “shadowed” into the system’s dynamic memory and the system runs using BIOS parameters stored in dynamic memory. BIOS Setup 3 BIOS Setup is a configuration utility that you can use to cha...

BIOS Setup 6 Using BIOS Setup 3 Once BIOS Setup is started, you can use BIOS Setup to change your system’s BIOS settings. The BIOS Setup screen consists of a menu bar, menu items, a command bar, and a window for item-specific help as shown in Figure 3-1. Figure 3-1 BIOS Setup Screen Instructions for...

BIOS Setup 7 and Boot menus contain submenus.) • To view Item-Specific Help for a BIOS option, select the option. Item specific help is displayed in the Item Specific Help panel on the right-hand side of the screen. • To view General Help for BIOS Setup, tap on Help in the command bar or press F1 on...

BIOS Setup 8 BIOS Setup Main Menu Options 3 Note: All details listed in this chapter reflect BIOS version 1.02. BIOS Setup Main menu options are given in Table 3-1. (Options and settings for other BIOS Setup menus are described in the tables that follow.) The default setting for each option is liste...

BIOS Setup 9 Primary Master Submenu Options 3 Options and settings for the Primary Master Submenu are given in Table 3-2. * These values can be changed when Hard Disk is selected. Table 3-2. BIOS Setup Primary Master Configuration Options Option Settings Description Type AutoNone Hard Disk IDE hard ...

BIOS Setup 10 Advanced Menu Options 3 Options in the Advanced menu are described in Table 3-3. Table 3-3. BIOS Setup Advanced Menu Options Option Settings Description Plug & Play OS NoYes Determines whether BIOS support for Plug and Play device configuration is enabled. Select [Yes] if your oper...

BIOS Setup 11 Serial/Parallel Port Configuration Submenu Options 3 Configuration options for the Serial/Parallel Port Configuration submenu are given in Table 3-4. Note that some peripheral interfaces are only available when using a device attached to the system interface port such as the mini-dock....

BIOS Setup 13 Keyboard/Mouse Features Submenu Options 3 Configuration options for the Keyboard/Mouse Features submenu are given in Table 3-5. Table 3-5. Keyboard/Mouse Features Submenu Options Option Settings Description Numlock AutoOnOff This option determines the state of the NumLock key when the ...

BIOS Setup 14 Video Submenu Options 3 Options for the Video Features submenu are given in Table 3-6. Table 3-6. Video Features Submenu Options Option Settings Description Display Internal Flat PanelExternalSimultaneous Determines the default display device. Select the appropriate option to choose th...

BIOS Setup 15 Internal Device Configurations Submenu 3 Options for the Internal Device Configurations submenu are given in Table 3-7. Table 3-7. Internal Device Configurations Submenu Options Option Settings Description Floppy Disk Controller DisabledEnabled When [Enabled] is selected, the floppy di...

BIOS Setup 16 PCI Configuration Submenu 3 The PCI Configuration submenu has only one selection: the IRQ Reservation submenu. The IRQ Reservation submenu allows you to reserve specific IRQs that are used by legacy devices. Unless you need to reserve specific IRQs to resolve a resource conflict, the r...

BIOS Setup 17 CPU Features Submenu 3 Options for the CPU Features submenu are given in Table 3-9. Table 3-9. CPU Features Submenu Options Event Logging Submenu 3 The Event Logging Submenu allows you to configure DMI (Desktop Management Interface) event logging options. To access this submenu, select...

BIOS Setup 18 Security Menu Options 3 Security menu options for the Stylistic 3500 pen tablet are described in Table 3-11. Note that settings for some security menu options determine whether other options are available. Table 3-11. BIOS Setup Security Menu Options Option Settings Description Supervi...

BIOS Setup 20 Hard Disk Security Submenu 3 Hard Disk Security submenu options for the Stylistic 3500 pen tablet are described in Table 3-12. Table 3-12. Hard Disk Security Submenu Options Owner Information Submenu 3 Owner Information submenu options for the Stylistic 3500 pen tablet are described in...

BIOS Setup 21 Power Menu Options 3 Options for the Power menu are described in Table 3-14. Default settings for most options in this menu differ depending on the setting selected for the Power Savings BIOS option. (Refer to Chapter 7 of this manual for more information on power management.) Windows ...

BIOS Setup 23 Advanced Features Options Submenu 3 Options for the Advanced Features Options submenu are described in Table 3-15. Table 3-15. BIOS Advanced Features Options Submenu Option Settings Description Suspend/Resume Switch DisabledEnabled Determines whether the Suspend/Resume switch is enable...

BIOS Setup 24 Boot Menu Options 3 Boot menu options are described in Table 3-16. Boot Device Priority Submenu 3 Table 3-17. describes settings in the Boot Device Priority submenu. Table 3-16. BIOS Setup Boot Menu Options Option Settings Description QuickBoot Disabled EnabledAuto Determines whether t...

BIOS Setup 25 Info Menu 3 The Info menu displays information about the pen tablet hardware and BIOS software installed on the system as described in Table 3-18. Exit Menu Options 3 Exit menu options are described in Table 3-19. Table 3-18. BIOS Setup Info Menu Field Description BIOS Version Version ...

Using CMOSRDWR 26 Using CMOSRDWR 3 The CMOSRDWR command line allows you to read the system BIOS CMOS contents into a specified file, then write the contents into another identical system that uses the same BIOS version. Any number of BIOS configurations can be stored using this command, either on th...

PHDISK Hard Disk Preparation Utility 27 PHDISK Hard Disk Preparation Utility 3 The PHDISK hard disk preparation utility can be used to prepare either a dedicated partition or create a hidden MS-DOS file for storing system data during a “save-to-disk” operation. Note: The Save-to-Disk operation will ...

PHDISK Hard Disk Preparation Utility 28 The example below shows the type of information that is displayed when PHDISK is called without a command line option. This example displays both the save to disk FILE INFORMATION and save-to-disk PARTITION INFORMATION headers. These headers are displayed only...

PHDISK Hard Disk Preparation Utility 30 /CREATE Option Syntax 3 The syntax of the PHDISK /CREATE option is: PHDISK /CREATE [SIZE][/FILE][/PARTITION] Table 3-21 lists valid examples of the PHDISK /CREATE option. REFORMAT Option 3 The /REFORMAT option resets the pointers in a save-to-disk partition. U...

PHDISK Hard Disk Preparation Utility 31 DELETE Option 3 When DELETE is specified, the pointers and data in the specified save-to-disk partition or file are deleted. Use DELETE when bad data is displayed after a Resume From Disk operation. /DELETE Option Syntax 3 Table 3-23 lists valid examples of th...

PHDISK Hard Disk Preparation Utility 32 Messages 3 PHDISK returns various informational messages, not all of which are listed here. The following listing emphasizes the error messages, including a possible course of action. PHDISK Sign-on Message 3 This message is displayed at system startup. PHDISK...

35 Chapter 4 Installing Hardware Options This chapter provides procedures for installing PC Cards and DIMM cards. (For details on replacing the pen tablet’s internal IDE hard disk drive, refer to “Removing the Hard Disk Drive” on page 75.) Installing a PC Card 4 You can install a PC Card while the s...

Removing a PC Card 36 Removing a PC Card 4 To remove a PC Card, 1. Stop the PC Card using the appropriate features of your operating system. 2. Press the Eject button for the PC Card slot. 3. Pull the PC Card all the way out of the slot. Installing a DIMM Card 4 Only one DIMM socket is available on ...

Removing a DIMM Card 37 Removing a DIMM Card 4 To remove a DIMM card, 1. Ensure that the pen tablet is off. To do so, carry out the Shut Down command in the Start menu. (Do not attempt to remove or install a DIMM card when the system is in Suspend mode or running.) 2. Remove the screws from the cove...

38 Chapter 5 Hardware Specifications Specifications for the Stylistic 3500 pen tablet and mini-dock are given in this chapter. General Specifications 5 General specifications for the pen tablet are given in Table 5-1. Table 5-1. Logic System Specifications Feature Specification Comments Architecture...

Display Specifications 39 Display Specifications 5 Specifications for the Stylistic 3500 pen tablet display are given in Table 5-2.. The Stylistic 3500 pen tablet is available with one of three different displays. Note the display type for your system when referring to this table. Comments indicate ...

Digitizer Specifications 40 Digitizer Specifications 5 The Stylistic 3500 pen tablet digitizer consists of the pen, a sensor grid, and supporting controller circuitry. The sensor grid is built into the pen tablet in front of the display screen and detects pen pressure. Technology Notice 5 The displa...

Peripheral Interface Specifications 41 Peripheral Interface Specifications 5 Specifications for peripheral interfaces on the Stylistic 3500 pen tablet are given in Table 5-5. For specifications on peripheral interfaces provided by the port replicator, see “Port Replicator Specifications” later in th...

Power System Specifications 42 Power System Specifications 5 Specifications for the Stylistic 3500 pen tablet power system are given in Table 5-6. The power system and power management characteristics are further described in Chapter 7 of this manual. Table 5-6. Power System Specifications Feature S...

Environmental Specifications 43 Environmental Specifications 5 Environmental specifications for the Stylistic 3500 pen tablet are given in Table 5-7. Physical Specifications 5 Physical specifications for the Stylistic 3500 pen tablet are given in Table 5-8. Agency Approval Specifications 5 Specifica...

Internal LAN/Modem Specifications 44 Internal LAN/Modem Specifications 5 The internal LAN/modem device connects to the system’s PCI bus. Specifications for the internal LAN/modem are given in Table 5-10. The internal LAN/modem is built-in and is not field replaceable. The internal modem is a global ...

High Usage Contacts 47 Chapter 6 Peripheral Interfaces Details on peripheral interfaces on the Stylistic 3500 pen tablet are described in this chapter. The Stylistic 3500 pen tablet provides the following peripheral interfaces: • DC input connector• Serial port• IrDA port• Infrared keyboard port• Un...

Floppy Disk Drive Port 49 Floppy Disk Drive Port 6 The floppy disk drive port on the pen tablet is compatible with the Fujitsu floppy disk drive. Pin assignments for the floppy disk drive connector are given in Table 6-4. #Indicates active-low signal. Table 6-4. Floppy Disk Drive Connector Pin Assig...

Universal Serial Bus Port 50 Universal Serial Bus Port 6 The pen tablet provides a Universal Serial Bus (USB) port that is compliant with the Universal Serial Bus Specification Revision 1.0. The USB port is a powered USB hub and can support concurrent operation of up to 127 devices. The Stylistic 35...

System Interface Port 51 System Interface Port 6 The system interface port on the Stylistic 3500 pen tablet allows you to attach the Stylistic 3500 port replicator or mini-dock. The system interface port is a 200-pin connector. Figure 6-1 shows the pin locations for the system interface port connect...

IrDA Port 59 IrDA Port 6 The IrDA port on the Stylistic 3500 pen tablet is compliant with the Infrared Data Association (IrDA) Standard Revision 1.1. Specifications for the IrDA port on the pen tablet are given in Table 6-7. Before you can use the IrDA port, the Serial Port B Device BIOS option must...

PC Card Port 61 PC Card Port 6 The PC Card socket is compliant with PC Card standard 3.0. Table 6-10 shows the pin assignments for the PC Card port. Table 6-2 illustrates the pin locations on the connector. Figure 6-2 PC Card Port Configuration Table 6-10. PC Card Port Pin Assignments 16-bit PC Card...

Hard Disk Drive Port 64 Hard Disk Drive Port 6 Under ordinary circumstances, it is not necessary to access the hard disk drive port. The pin locations are listed in Table and illustrated in Figure in the event of hard disk replacement. Figure 6-3 Hard Disk Drive Pin Locations Table 6-11. Hard Disk D...

66 Chapter 7 System Power This chapter covers the Stylistic 3500 pen tablet’s system power hardware, power management states, and state transitions. System Power Hardware 7 The Stylistic 3500 pen tablet uses components designed for low power consumption in mobile applications. DC power, whether supp...

System Power Hardware 67 DC Power Inputs 7 External DC power can be connected at three locations on the pen tablet: • DC power connector on the pen tablet • System interface connector • DC input positions of the high-usage contacts A DC power source connected to any of these inputs must provide 3.36...

68 Chapter 8 BIOS Configuration Application Programming Interfaces This chapter describes application programming interfaces (APIs) that allow Windows applications to configure BIOS settings. These APIs include functions in the BIOSSET.DLL (dynamic-link library). This DLL includes functions that can...

InitializeBIOS 69 Note: Parameter names given in this manual in prototypes for some of these functions may differ from parameter names given in the prototypes that appear in the header files. This is done to provide consistent terminology throughout this manual. InitializeBIOS 8 This function initia...

Error Codes 70 On success, this function returns the label SETUP_SUCCESS. In the event of an error, this function returns one of the error codes listed in Table 8-1. Error Codes 8 Error codes returned by functions in this API are given in Table 8-1.. These values are defined in the header file BIOSI...

73 Chapter 9 Programmable Hotpad Libraries for Windows Applications This chapter provides details on using libraries that allow Windows applications to use the programmable hotpad on the pen tablet. Note: The library files and the header file referenced in this chapter can be downloaded from the Fuj...

SetHotpadNotification 74 SetHotpadNotification 9 This function enables hotpad notification. Applications which are to receive notification of hotpad events must call this function once to enable hotpad notification. A prototype of this function is shown below: int SetHotpadNotification ( HWND Window...

75 Appendix A Replacing the IDE Hard Disk Drive The internal IDE hard disk drive in the Stylistic 3500 pen tablet can be removed and replaced, if necessary. Removing the Hard Disk Drive 9 To remove the hard disk drive from the pen tablet, 1. Ensure that the pen tablet is off. To do so, carry out the...

Installing the Hard Disk Drive 78 Figure A-5: Installing the IDE Hard Disk Drive Installing the Hard Disk Drive 9 To install the hard disk drive, refer to Figures A-1 through A-5, and perform the following steps: 1. Connect the flex cable to the hard disk drive and fold the tab on the flex cable dow...

79 Appendix B AT Command Set This Appendix contains a summary of AT commands used by the Stylistic 3500 pen tablet’s modem. There are several things to note about this set of commands: • Commands should be entered as ASCII characters. • Commands should begin with “AT”, with a description of the char...

AT Commands Table 80 AT Commands Table 9 AT Data Commands 9 The shaded portion of the table are stored with the AT&W command. Command Specification Default A/ Repeat last command. A Answer command. D Dial T 123456789*0#ABCD 3 P 1234567890 W Wait for dial tone. Modem waits for a second dial tone ...

S Register Table 87 S Register Table 9 Default is North America. The shaded portions of the table are stored with AT&W command. Reg Function Units Default Range * S0 Auto answer ring number Rings 000 000-255 *JP000-015 S1 Ring counter. Read only. Rings 000 000-255 S2 Escape character ASCII 043 0...

Result Codes Summary 90 Result Codes Summary 9 Result Code Numeric Description OK 0 Command executed. CONNECT 1 Modem connected to line. RING 2 A ring signal has been detected. NO CARRIER 3 Modem lost carrier signal, or does not detect carrier signal, or does not detect answer tone. ERROR 4 Invalid ...

92 Appendix C Agency Notices FCC Notices 9 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. Changes or modifications not expressly approved by Fujitsu PC Corporation could void the user’s authority to operate the e...

DOC (Industry Canada) Compliance Notices 94 Notice to Users of the Canadian Telephone Network 9 The Canadian Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. Th...

DOC (Industry Canada) Compliance Notices 95 Avertissement Pour assurer la sécurité, les utilisateurs doivent vérifier que la prise de terre du service d’électricité, les lignes téléphoniques et les conduites d’eau métalliques sont connectées ensemble. Les utilisateurs NE doivent PAS tenter d’établir...

Index-1 Index A AC adapter, specifications, 42ACPI, support for, 1agency approval, specifications, 43agency compliance, 43agency notices, 92Air Bubbles in Display, 40APIs for configuring BIOS options, 68 BIOSSetupSet, 69Error Codes, 70InitializeBIOS, 69Option and Setting parameters, 70ReadBIOSSettin...