Fujitsu fi-4530C - Manuals

iv Manufacturer PFU LIMITED Image Products Sales Dept., Imaging Products Division, Products Group Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, JapanPhone : (81-44) 540-4538 All Rights Reserved, Copyright© PFU LIMITED 2003 ■ Note, Liability READ ALL OF THIS MA...

fi-4530C Image Scanner Getting Started v ■ Safety Precautions WARNING Do not damage the AC cable. Use only specified AC cables and connector cables Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips. Do not touch the AC cable with wet hands. Wipe any dust f...

vi CAUTION Do not install the scanner on unstable surfaces. Do not block the ventilation ports. Do not place heavy objects or climb on top of the scanner. Firmly insert the power plug. Avoid any contact when scanner is in use. Do not use the scanner immediately after moving it from a cold place into...

fi-4530C Image Scanner Getting Started 1 Chapter1 PREPARING THE SCANNER 1.1 Checking the Contents of the Scanner Package When you unpack the scanner package, make sure that the package contains all the parts on the list included in the package.If any parts are missing or defective, contact your sale...

fi-4530C Image Scanner Getting Started 3 Chapter2 INSTALLATION OF THE SCANNER 2.1 Installing the Scanner 1. Place the scanner at its installation site. For details on the scanner's dimensions and required installation space, refer to "fi-4530C Operator’s Guide" "7.2 Installation Specific...

4 2. Connect the other end of the USB interface cable to your PC. 3. Press down the power button on the operator panel to turn on the scanner. 4. Turn on your PC. ■ Connecting the SCSI Interface Cable When using the scanner with the SCSI interface, you need to purchase a commercially available SCSI ...

fi-4530C Image Scanner Getting Started 5 3. Press the power button to turn ON the scanner. When the scanner is turned ON, the SCSI ID set at step 2 is enabled. 2.3 Installing the Scanner Application For scanning documents with this scanner, both scanner driver and image capturing application softwar...

fi-4530C Image Scanner Getting Started 7 Now the installation of the scanner driver is completed. ■ Installing ScandAll 21 "Scandall 21" is image capturing software that complies with the TWAIN standard. With the FUJITSU TWAIN 32 scanner driver, you can capture images by using a FUJITSU imag...

8 6. When the [InstallShield Wizard Complete] win- dow appears, click [Finish] ■ Confirming Installation 1. Set documents on the ADF paper chute. For details on how to set documents, refer to the "1.2 Loading Documents on the ADF for Scan-ning" in the fi-4530 Operator’s Guide provided in the...

fi-4530C Image Scanner Getting Started 9 7. Documents are scanned, and the scanned images are displayed on the [ScandAll 21] win-dow. If the scanning is completed without any troubles, the installation was performed successfully. For details on various types of scanning, refer to the "fi-4530C O...

10 4. Click [INSTALL PRODUCTS]. 5. Click [ISIS Driver] on the window below. 6. Select a language used for installation on [Choose Setup Language] window and click [OK]. 7. Install the application following the instructions on the window. 8. When the [InstallShield Wiizard Complete] win- dow appears,...

12 3. Select [Preview Settings...] from the [Scan] menu. Set the scan resolution, paper size and other scanning conditions, and then click [OK]. 4. Load the documents on the scanner. For details on loading documents, refer to "1.2 Loading Documents on the ADF for Scanning" in the fi-4530C Op...

fi-4530C Image Scanner Getting Started 13 4. Select a language used for installation on [Choose Setup Language] window and click [OK]. 5. Install the application following the instructions on the window. 6. When the [InstallShield Wiizard Complete] win- dow appears, click [Finish]. (Trial) Image Pro...

fi-4530C Image Scanner Getting Started AP-1 Appendix1 TROUBLESHOOTING ■ Troubleshooting checklist Symptom Check this item Remedy Scanner does not turn on. Have you pushed the power button? Push the power button. Are the AC cable and AC adapter properly connected to the scanner? Correctly connect the...

fi-4530C Image Scanner Getting Started AP-3 ■ Temporary error The following shows the procedure for releasing of each temporary error. • "U1" error Remove jammed documents.Confirm that the documents meet the paper condi-tions for scanning.Refer to fi-4530C Operator’s Guide "6.2 Document ...

AP-4 Appendix2 DAILY CARE ■ Cleaning Materials For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchased the scan-ner. ■ Cleaning Method The ADF must be cleaned with a lint-free cloth moist-ened with the Cleaner F1. ■ Locations and Cycle for Cleaning For detail...

fi-4530C Image Scanner Getting Started AP-5 Appendix3 REPLACING CONSUMABLES ■ Consumables and Replacement Cycle The following table shows the specifications of consumables and guidelines for the replacement cycle. For purchase of consumables, contact the store where you purchased the scanner or an a...