Fujitsu 8.4 - Manuals
Fujitsu 8.4 – Manual in PDF format online.
Manuals:
Manual Fujitsu 8.4
Summary
Introduction Thank you for purchasing the "Scanner Utility for Microsoft Windows V8.4". This software contains a TWAIN-compliant image scanner driver (simply called "d river" in this guide) and utilities. This guide provides a description summary of the driver, as well as a descripti...
ii Trademarks MS-DOS, Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. IBM PC/AT and DOS/V are registered trademark of International Business Machine Corporation. Adaptec is a registered trademark of Adaptec Inc. EZ-SCSI is a trademark of Adaptec Inc. Other prod...
iv Contents 1. Outline .................................................................................................. 1 1.1 Characteristics of this Driver ....................................................................................1 1.2 Operating Environment ................................
2 1.3 Explanatory Notes The descriptions in this manual are prepared based on the following rules: ◊ Menus and buttons The menus and buttons used in the program description are enclosed in []. Example: [File] menu , [OK] button ◊ Keyboard The keytop indications comply with the standard keyboard of t...
3 1.4 Explanation of terms ◊ IPC option board IPC-2/2D in this guide refers to the IPC-2 and IPC-2D image processing circuit. IPC-3/3D in this guide refers to the IPC-3 and IPC-3D option board.
4 2. TWAIN 2.1 TWAIN TWAIN is the specification that defines the standard software protocol and application programming interface (API) for data exchange between a software application program and an image input device such as the image scanner. [TWAIN development background] In the past, developmen...
5 • Application software (photo retouching software, etc) ‚ Source manager (TWAIN.DLL/TWAIN_32.DLL, etc) ƒ Source (Image scanner control of the driver, etc) Image scanner , etc. Figure TWAIN Application
6 3. Installation 3.1 Preparation 1. Check that the operating system is installed correctly. 2. Check that the SCSI adapter is connected to the computer. 3. Check whether the SCSI driver and ASPI manager are installed correctly and operating (For windows 2000, 4.60 or later) Note Version 4.01 or l...
7 Figure Fujitsu TWAIN group * For the FUJITSU Scanner Control Center, the Gamma Pattern Editor and the Firmware Updater, see section 6, 5, and 7 respectively.
9 4. Using the Driver 4.1 Selecting the Driver To use this driver from the TWAIN application, select "FUJITSU TWAIN32" from the TWAIN data source (driver) selection screen. For general application, the data source selection screen is displayed by selecting the [Select Scanner] or [Acquire .....
10 4.2 Screen Configuration Figure Main Dialog The following pages contain the explanation and operation description for each part.
11 4.3 Displaying Driver Information ♦ Image scanner name The model name, option port name, and capacity of internal scanner memory (in units of megabytes) of the connected image scanner are displayed. If no image scanner is connected, this field is blank. To change the selected scanner, click the [...
12 ♦ Data size The approximate amount of data per image when data is scanned in the present option. Note This value is the amount of uncompressed data. The size of the stored file will differ from this value and is usually smaller if image compression is chosen and the image is compressed. 4.4 Setti...
13 ♦ Paper Size Selects a paper size corresponding to the size of the document to be scanned. Select a standard paper size from the list or [Custom]. If [Custom] is selected, the "Custom Paper Size Setting" dialog appears. Enter the size of the document to be scanned. (In this case, specify ...
15 ♦ Long page (front and backside) In the same case as that for scanning the front of a long page, this option is selected in order to scan the entire side of a long page whose length exceeds the vertical size of an A3 sheet. If this option is selected, the document is scanned in the "front to ...
19 ♦ Contrast: Sets the contrast of light and shadow in a scanned image. Specify the contrast with a number in the range of 1 (low [soft]) to 255 (high [sharp]). The contrast can be set if "Gray Scale" is selected in "Image Mode ." If this value is increased, the dark part of the ima...
20 Progress indicator ♦ [Close] / [OK] Closes the dialog box without scanning. If a setting is changed, the changed setting is saved in the initial value file. ♦ [Reset] Restores the current setting values to the status immediately after the window is opened. ♦ [Help] Displays online help. When the ...
22 4.7 Setting Options The "option dialog" is used to set device-specific functions and the items that differ depending on whether the scanner used supports them. The option specification is divided into "Rotation", "Job/Cache", "Generic", "Imprinter (Endorser)...
23 The options are described below: 4.7.1 Rotation Figure Option dialog (Rotation) ♦ Flip Side Rotation Specifies the binding of the document when both sides are scanned using ADF. Book Outputs the scanned image for both sides as is. Select this option to scan documents bound on the left or right si...
24 ♦ Rotation Degree Outputs the scanned image rotated to the right or left 90 degrees. 0.0 degree Outputs the scanned image as is. 90.0 degree Outputs the scanned image rotated 90 degrees to the right (clockwise). -90.0 degree Outputs the scanned image rotated 90 degrees to the left (counterclockwi...
25 4.7.2 Job/Cache Figure Option dialog (Job/Cache) ♦ Caching Specifies whether to pre-read (cache) when a document is scanned. This option enables faster scanning. If processing of the application being used slows down and scanning stops, this option can be used to prevent degradation of the scanni...
29 4.7.3 Generic Figure Option dialog (Generic) ♦ Unit/Scaling This option selects the unit for the scanning area and preview window. One inch is calculated as 25.4 millimeters. When inches are converted to millimeters, values are rounded off. Note The TWAIN specifications require that the data widt...
33 4.7.5 Start Up Figure Option dialog (Start Up) ♦ Power Mode − Quick Start M ode This mode keeps the lamp on regardless the scanner’s operating condition, which saves times for lamp to become steady. − Low Power Mode To save the power consumption, this mode turns the lamp off, if the scanner is no...
35 4.8 Setting Advance Options The "advance dialog" is used to set items related to image processing. The settings apply to device-specific functions and items that differ according to whether the scanner used supports them. The advance option specification is divided into "Color Varianc...
36 The options are described below: 4.8.1 Gray Figure Advance dialog (density correction) ♦ Gamma Pattern This option corrects distortions from nonlinear image representation. Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document. Ho...
37 When "Download Pattern" is selected, the above dialog box opens. Select the gamma pattern download file to be used from the list of file names. Then, press the [OK] button. Correction will then be executed using the selected gamma pattern. If the gamma pattern download file has not been r...
38 ♦ Dropout Color This option enables scanning excluding the selected color information of green, red, or blue (the three primary colors of light). For example, to scan black characters framed in red, selecting red for scanning will scan only the black characters. ♦ Reverse This option specifies wh...
43 4.8.4 When Color is specified For color devices, if Color is selected in the image type, dialog display change s as follows. Figure Advance dialog (Color) <Image Mode : Color selected> ♦ Shadow/Highlight Shadow : The highlight allows the darkest part of the document to be controlled. The hi...
45 Figure Advance dialog (Quality) <Image Mode : Color selected> ♦ Image Emphasis This option specifies the sharpness of a scanned image. Select "None", "De-Screen" or "Emphasis". None Edge processing is not performed. Emphasis This option outputs an image with the edge...
47 4.9 Setting the Configuration Options These options are us ed to manage the setting files, and switch the basic scan dialog display. Press the [Config] button of the main dialog to open the [Configuration] dialog box shown below. Figure Option dialog box (simplified DTC) ♦ Setting Files The setti...
50 4.10 Basic Scan Dialog The basic scan dialog contains only the minimum functions required for scanning. The detailed setting functions of the main dialog ha ve been omitted. Scanning can be easily performed by selecting a registered setting file. The basic scan dialog is also useful for avoiding ...
52 4.11 Download Pattern File The "download pattern file" of this driver is a file that defines the patterns to be used by the scanner to execute various image processing. This file is available in the following two versions. Each version can be selected using the [Download Selection Dialog]...
53 Example 8, 8, 128, 128, 128, 128, 128, 128, 128, 128, 255, 128, 128, 128, 128, 128, 128, 128, 255, 255, 128, 128, 128, 128, 128, 128, 255, 255, 255, 128, 128, 128, 128, 128, 255, 255, 255, 255, 128, 128, 128, 128, 255, 255, 255, 255, 255, 128, 128, 128, 255, 255, 255, 255, 255, 255, 128, 128, 255...
56 5. Using the Gamma Pattern Editor 5.1 Start-up Click on "Start" and select "Downloa d Pattern Editor" from "Scanner Utility for Microsoft Windows" under "Programs." The following menu is displayed: Figure Gamma Pattern Editor Tool start -up menu
57 5.2 [File] menu ♦ [Load] This menu is used to read the Gamma Download file and display the graph and gradations. The name of the open file is displayed above the graph area. ♦ [Save] The gamma pattern currently being edited is saved in the file whose name is displayed above the graph area. If no ...
59 5.4 Gamma Pattern Editing ♦ Graph Area The graph area is a 256-dot × 256- dot white square area bordered by black lines, where the relationship between the input values of 0 to 255 (x axis) and output values of 0 to 255 (y axis) is indicated in blue lines. Each graph dot represents one division (...
60 6. How to Use the FUJITSU Scanner Control Center 6.1 Outline This software that is resident in the system continuously monitors the scanner connected and starts the target application in response to an instruction from the operation panel in the scanner. (Pressing the start button on the scanner ...
66 7. Using the Firmware Updater This application software is used to update the firmware installed in the scanner device. However, this application software is automatically executed when the driver installation is completed. If the software is executed at the installation, it is not necessary to e...
81 8.2 Device Trouble Related to Operation • The [Scan] button is pressed, but scanning is not performed. Cause: Has the scanner power been turned on? Ha s the SCSI cable been connected correctly? Has the correct device type been selected using [Select TWAIN Input Device]? • The scanner appears to b...
82 9. Appendix 9.1 Relevant Image Scanner Specification Product: M3093GX 1 (fi-4320S) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feeder (ADF) Light source: Xe discharge tube (Green) Basic resolution: Horizon...
107 9.2 Maintenance Service This section explains briefly how you can help us to provide you with high-quality maintenance service. Since it is practically impossible for the Fujitsu service staff to be aware of every detail of your daily scanning operation, please understand that our staff may some...
108 TWAIN Scanner/Driver Utility “Scanner Utility for Microsoft® Windows®” Users Guide 32 bit version First Edition June 2001 2nd Edition August 2001 All Rights Reserved, Copyright FUJITSU LIMITED 2001 • The contents of this document may change for improvements without prior notice. • Fujitsu take...
Fujitsu Manuals
-
Fujitsu P42VCA12
Manual
- Fujitsu S500M Manual
-
Fujitsu C1410
Manual
- Fujitsu FI-6140Z Manual
-
Fujitsu P50XHA40U
Manual
-
Fujitsu D1931
Manual
-
Fujitsu PDS5003W
Manual
-
Fujitsu M4099D
Manual
-
Fujitsu P63XHA40U
Manual
-
Fujitsu B6220
Manual
-
Fujitsu M3093DE
Manual
-
Fujitsu ETERNUS DX8000 series
Manual
-
Fujitsu FTP-641MCL352
Manual
-
Fujitsu YV2.4X2.5A-2
Manual
-
Fujitsu FS-1008MU
Manual
- Fujitsu T731 Manual
-
Fujitsu FTP-627MCL113
Manual
-
Fujitsu ETERNUS4000
Manual
-
Fujitsu FMWCC42
Manual
-
Fujitsu FTP-607 Series
Manual