Fujitsu 4Gbit/s FC I/O Modules - Manuals

Fujitsu 4Gbit/s FC I/O Modules – Manual in PDF format online.

Manuals:

Manual

Manual Fujitsu 4Gbit/s FC I/O Modules

Summary

Page 2 - Remarks; Warning Descriptions; The following indicate pressing several keys at once:; WARNING

40 Remarks Warning Descriptions Various symbols are used throughout this manual. These are provided to emphasize important points for your safety and that of others. The symbols and their meanings are as follows. Be sure to fully understand these before reading this manual. The following symbols are...

Page 3 - Abbreviations; Safety; Handling this product

41 E Abbreviations The following expressions and abbreviations are used to describe the product names used in this manual. Safety For your safety and that of others, follow the guidelines provided on the following pages concerning the use of this product. Handling this product WARNING CAUTION Produc...

Page 4 - Checking the Items Supplied

42 Checking the Items Supplied Check that the following items are supplied before using this product. Please contact an office listed in "Appendix B Contact Information" ( pg.75) if any parts are missing. • 4Gbit/s FC I/O Module (this product) • Driver Disk × 1 (CD-ROM) - 4Gbit/s FC I/O Modu...

Page 5 - Contents; Appendix A

43 E Contents 1 4Gbit/s FC I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 7 - Overview

1 4Gbit/s FC I/O Module 45 E 1 4Gbit/s FC I/O Module This chapter explains the features and specifications of this product. 1.1 Overview This product is a Fibre Channel expansion board for use exclusively with BX620 S3 and BX620 S4 server blades. This product is configured with one dual port (2 port...

Page 8 - Specifications

46 1.2 Specifications This product is an expansion board used in order to install fiber channel interface on the server blade. This product has the following features: • Capable of high-speed data transfer at a maximum rate of 4Gbps. • You can place the connected device away from the server. • Uses ...

Page 9 - How to Check the Driver Version

1 4Gbit/s FC I/O Module 47 E 1.3 How to Check the Driver Version The following explains the procedure to check the driver version. 1 Click the "Start" button → "Settings" → "Control Panel" → "Administrative Tools" → "Computer Management" in this order. 2 Click...

Page 10 - Fabric connection; Notes on Replacing the 4Gbit/s FC I/O Module; Event log

48 1.4 4Gbit/s FC I/O Module to ETERNUS Connections This section explains the connection of the 4Gbit/s FC I/O Module and ETERNUS. Fabric connection Connect to the ETERNUS via FC Switch Blade. 1.5 Notes on Replacing the 4Gbit/s FC I/O Module When an operating 4Gbit/s FC I/O Module has been replaced ...

Page 11 - Installing in a Server Blade

2 Installing the 4Gbit/s FC I/O Module 49 E 2 Installing the 4Gbit/s FC I/O Module This chapter explains the installation procedure in the server blade. WARNING CAUTION 2.1 Installing in a Server Blade Installing a FC Network Blade on chassis network blade slot 3 or network blade slot 4 is necessary...

Page 12 - Installation Position of the 4Gbit/s FC I/O Module; Remove the server blade from the chassis.

50 2.1.1 Installation Position of the 4Gbit/s FC I/O Module The 4Gbit/s FC I/O Module is installed in the server blade expansion board slot. 2.1.2 Installation Procedure for the 4Gbit/s FC I/O Module 1 Turn off the server blade where the 4Gbit/s FC I/O Module will be installed. → "3.3 Turning Of...

Page 13 - Attach the top cover.

2 Installing the 4Gbit/s FC I/O Module 51 E 5 Install the 4Gbit/s FC I/O Module. Make sure the 4Gbit/s FC I/O Module is securely on the slot. 6 Secure the 4Gbit/s FC I/O Module with the screws. Secure the 4Gbit/s FC I/O Module with three screws included with this product. 7 Attach the top cover. → &...

Page 14 - Connecting Cables; This chapter explains points to note when connecting cables.; CAUTION

52 3 Connecting Cables This chapter explains points to note when connecting cables. CAUTION For details on how to connect the cables, refer to "SilkWorm 4016 Hardware Reference Manual" and "SilkWorm 4016 QuickStart Guide". Connect the cable to the FC Network Blade installed in the BX...

Page 15 - Installing Drivers and Utilities; Automatic Installation

4 Installing Drivers and Utilities 53 E 4 Installing Drivers and Utilities This chapter explains the procedure for installing drivers and utilities. • For installing drivers and utility (HBAnyware) at the same time. "4.1 Automatic Installation"(pg.53) • For installing drivers and utility (HB...

Page 17 - Manual Installation; For Installation on Windows Server 2003; Installing Emulex PLUS

4 Installing Drivers and Utilities 55 E 4.2 Manual Installation Drivers and utilities can be manually installed using the following procedures. 4.2.1 For Installation on Windows Server 2003 When "Welcome to the Found New Hardware Wizard" appears during startup, click [Cancel]. Installing Emu...

Page 19 - Check the driver version.; Installing HBAnyware

4 Installing Drivers and Utilities 57 E 12 Check the driver version. • For 32Bit 5.1.30.9 • For 64Bit 7.1.30.9 13 Close the board property window. When installation finishes, perform "4.2.2 Installing HBAnyware" ( pg.57). 4.2.2 Installing HBAnyware 1 Insert the driver disk (CD-ROM) into the ...

Page 20 - Using LightPulse Utility / NT

58 4.3 Checking and Updating Firmware /BootBIOS There are two methods to check and update Firmware/BootBIOS. The results will bring no difference. "4.3.1 Using LightPulse Utility / NT"(pg.58) "4.3.2 Using HBAnyware Utility"(pg.60) 4.3.1 Using LightPulse Utility / NT This product name...

Page 22 - Using HBAnyware Utility

60 4.3.2 Using HBAnyware Utility This product name displayed in HBAnyware Utility is "BX600-FC42E - 10:00:**:**:**:**:**:**". The "**:**:**:**:**:**" shows the IEEE address of the 4Gbit/s FC I/O Module. Each 4Gbit/s FC I/ O Module has a unique IEEE address, which is written on the st...

Page 23 - Uninstalling HBAnyware; Uninstalling AutoPilot Installer; Follow the displayed instructions to uninstall.

4 Installing Drivers and Utilities 61 E 8 For the BootBIOS version, check the "BootBIOS" value in "Boot BIOS". • When the version is "1.70a3", proceed to Step 13. • When the version is other than "1.70a3", proceed to Step 9. 9 Click the "Update Firmware..." in...

Page 24 - This chapter explains the 4Gbit/s FC I/O Module details settings.

62 5 4Gbit/s FC I/O Module Details Setting This chapter explains the 4Gbit/s FC I/O Module details settings. The setting effects are the same between the settings set by double-clicking [Device] of [key] after selecting [Registry] with the radio button in the LightPulse Utility/NT settings, and the ...

Page 28 - Check the parameters that have been set.

66 8 Double-click "QueueTarget" in "Parameters". 9 Set "1" (fixed value) in "New Value", check "Permanent", and click [Change]. 10 Double-click "LinkSpeed" in "Parameter". 11 Set a value in "New Value", check "Permanent", and cl...

Page 33 - Registry Setting; Follow the paths below.; After finishing all the settings, restart the server blade.

5 4Gbit/s FC I/O Module Details Setting 71 E 5.2 Registry Setting 1 Click the "Start" button → "Run..." in this order. 2 Enter a name in "Name" as follows, and click [OK]. regedit The registry editor starts. 3 Follow the paths below. \HKEY_LOCAL_MACHINE \SYSTEM \CurrentContro...

Page 34 - Troubleshooting; Checking the Link Status; How to start the Light Pulse BIOS Utility

72 6 Troubleshooting This chapter explains the troubleshooting methods when this product is notrunning properly or when error messages are displayed. 6.1 Checking the Link Status The link status connection can be checked upon system start by starting the Light Pulse BIOS Utility. How to start the Li...

Page 36 - How to Identify the; This chapter explains how to identify the adapter.

74 Appendix A How to Identify the Adapter This chapter explains how to identify the adapter. Each 4Gbit/s FC I/O Module has an IEEE Address. The IEEE Address is on a sticker on the front or rear of this product. For PG-FCD201, there are two adapters and two IEEE Addresses. Due to this there are two ...

Page 37 - Appendix B; Contact Information

Appendix B Contact Information 75 E Appendix B Contact Information • Australia: Fujitsu Australia Limited Tel: +61-2-9776-4555 Fax: +61-2-9776-4556 Address: 2 Julius Avenue (Cnr Delhi Road) North Ryde, Australia N.S.W. 2113 • China: Fujitsu (China) Holdings Co., Ltd. Tel: +86-21-5292-9889 Fax: +86-2...

Page 39 - PRIMERGY; Printed in Japan

P ● 本書の内容は、改善のため事前連絡なしに変更することがあります。● 本書に記載されたデータの使用に起因する、第三者の特許権およびその他の権利の侵害については、当社はその責を負いません。 ● 無断転載を禁じます。● 落丁、乱丁本は、お取り替えいたします。 • The contents of this manual may be revised without prior notice. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the ...