Fujitsu 2300 - Manuals

1-1 Chapter 1 Getting Started The Stylistic 2300™ pen tablet is a high-performance, pen-based computer that is designed to support Windows 95, Windows 98, or Windows NT. This chapter provides an overview of the Stylistic 2300 pen tablet and its features. Included with the Stylistic 2300 Pen Tablet 1...

1-2 Getting Started Optional Accessories 1 The following optional accessories can be used with the Stylistic 2300 pen tablet. Refer to the instructions provided with these accessories for details on their use. • Auto adapter FMWCB2• Stylistic port replicator FMW25PR1• External floppy disk drive FMWF...

Stylistic 2300 Pen Tablet Features 1-3 Stylistic 2300 Pen Tablet Features 1 Features and controls that you use to operate the Stylistic 2300 pen tablet are described briefly below and illustrated in Figures 1-1 and 1-2. Details on using these features and controls are provided later in this manual. ...

1-4 Getting Started Figure 1-1 Stylistic 2300 Pen Tablet Features (Front View) Rear Features: 1 • System interface port: Allows you to connect the Stylistic port replicator or other approved docking device. † • PS/2-style keyboard/mouse port: Allows you to attach a keyboard or mouse. † • DC input co...

Stylistic 2300 Pen Tablet Features 1-5 • Reset button: Restarts the pen tablet in the event of system difficulty. The reset button cannot be seen in Figure 1-2; it is located behind the I/O connector door. • Pen tether attachment points: Allows you to attach a pen tether. † • Heat sink vents: Provid...

1-6 Getting Started Status Display 1 Icons appear in the Status display indicating the status of system functions such as system power and battery charge level. The location of icons in the Status display is shown in Figure 1-3. Figure 1-3 Status Display Icons Table 1-1 shows how individual icons ar...

1-8 Getting Started Connectors and Peripheral Interfaces 1 Connectors and peripheral interfaces on the Stylistic 2300 pen tablet allow you to connect a variety of devices. Figures 1-4 and 1-5 show locations of peripheral connectors on the pen tablet. Figure 1-4 Peripheral Connectors DC Input Video P...

Connectors and Peripheral Interfaces 1-9 A floppy disk drive connector is located behind the battery and is accessible only when the battery pack is removed. Note: The floppy disk drive connector uses a special interface that can be mated only with a Fujitsu FMWFD2 floppy disk drive. Do not attempt ...

1-10 Getting Started Table 1-2 provides a description of each peripheral connector on the Stylistic 2300 pen tablet. Each of the illustrated icons is embossed on the pen tablet case. Table 1-2 Peripheral Connectors Connector/ Peripheral Pen Tablet Icon Purpose DC input connector Connect an external ...

2-1 Chapter 2 Using the Stylistic 2300 Pen Tablet This chapter covers the fundamental concepts, basic system operation and use, and system functions of the Stylistic 2300 pen tablet. You should familiarize yourself with this information before you attempt to operate the system. System States 2 Befor...

2-2 Using the Stylistic 2300 Pen Tablet • Off state All system functions are turned off to conserve power. The system does not respond to the pen or other input. The system boots at the next system power-on. Note: The system consumes the same amount of power whether it is in Suspend-to-Disk mode or ...

Starting the Pen Tablet 2-3 Starting the Pen Tablet 2 Follow the procedure below to start the Stylistic 2300 pen tablet. Before you begin, confirm that the system is in the Off state. To do so, observe the Status display. If the Power icon is not visible in the Status display, the system is in the O...

2-4 Using the Stylistic 2300 Pen Tablet Shutting Down the System 2 Follow these steps to shut down and turn off your system: 1. If system operation has been suspended, resume system operation. See “Resuming System Operation” later in this chapter for details. 2. Save your work and close all running ...

2-6 Using the Stylistic 2300 Pen Tablet • If the battery pack charge drops to the Low-Battery Warning level while the system is running, the system will beep periodically. If this occurs, suspend system operation, shut down the system, or attach an external power source, such as the AC adapter, to t...

Using Hotpads 2-7 Note that power to several system components must be restored before system operation resumes. Allow sufficient time for system operation to resume before attempting to use the system. If your system uses Suspend-to-Disk mode, it will take longer to resume operation as compared to ...

2-8 Using the Stylistic 2300 Pen Tablet • Display Select hotpad This hotpad allows you to choose the pen tablet display screen, an external video monitor, or both as the selected system display(s). The pen tablet display screen appears blank when an external monitor alone is selected. • Contrast hot...

2-10 Using the Stylistic 2300 Pen Tablet Charging the Battery Pack 2 The Stylistic 2300 battery pack can be charged while it is installed in the pen tablet. To do so: 1. Connect a DC power source, such as the AC adapter, to the DC input connector on the pen tablet. The DC Input icon appears in the S...

Removing and Installing the Battery Pack 2-11 • The Stylistic 2300 battery pack uses lithium ion battery cells which have no “memory effect.” You do not need to discharge the battery pack before you begin charging. Removing and Installing the Battery Pack 2 The battery pack can be removed from the p...

2-12 Using the Stylistic 2300 Pen Tablet Figure 2-3 Removing and Installing the Battery Pack Conserving Battery Power 2 You can extend the charge life of your battery pack by conserving battery power. A fully charged battery pack can run the system under normal use in most applications for approxima...

Modem Connection 2-13 • Shut down the system if you won’t be using the system for an extended period of time. • Use power management timeouts (accessible through the BIOS setup) to help you conserve power automatically. Care of Bridge Battery When installed in the pen tablet, the battery pack provid...

2-14 Using the Stylistic 2300 Pen Tablet PC Card Slots 2 The Stylistic 2300 pen tablet has two PC Card slots that allow you to install up to two Type II PC Cards using both slots 1 and 2, or a single Type III PC Card using slot 1 only. There are two ways to install a PC card, depending upon the card...

3-1 Chapter 3 Care and Maintenance This chapter gives you pointers on how to care for and maintain your Stylistic 2300 pen tablet. Protecting the Display Screen 3 The Stylistic 2300 pen tablet is designed to provide you with years of service. Using a screen protector will help ensure that the screen...

3-2 Care and Maintenance 2. Clean the display screen surface by wiping the screen surface gently using a soft cotton cloth dampened with denatured alcohol. Ensure that all film has been removed from the screen before applying a new screen protector. 3. Remove the protective coating from the adhesive...

Protecting the Stylistic 2300 Pen Tablet in Harsh Environments 3-3 Protecting the Stylistic 2300 Pen Tablet in Harsh Environments 3 The Stylistic 2300 pen tablet is designed for use in environments where there is no direct exposure to rain, mist, sprays, dirt, or other abrasive particles. The option...

3-4 Care and Maintenance Replacing the Pen Tip 3 The pen tip is made of a soft plastic material. With use, the pen tip may become worn or may pick up abrasive particles that can scratch the display screen. A damaged or warped tip may not move freely, causing unpredictable results when using the pen....

Replacing the Pen Battery 3-5 Replacing the Pen Battery 3 The pen battery has a typical life of about one year under normal use. More frequent use will shorten battery life. The pen uses one size AAAA 1.5 volt alkaline battery. If your system does not respond to the pen, or your pen is producing unp...

3-6 Care and Maintenance 2. Remove the battery from the pen barrel. 3. Observing the polarity mark, insert a new battery into the pen barrel. (Insert the end of the battery with the negative terminal first.) Note: You do not need to remove the spring from the pen barrel when you replace the battery;...

3-8 Care and Maintenance Solving Problems 3 Solutions to some common problems are described in the following sections. If you are experiencing a problem with your Stylistic 2300 pen tablet that you cannot solve by taking the actions described, contact your local help desk or your reseller for furthe...

Solving Problems 3-9 Infrared Data Transfer Is Not Working 3 If you are experiencing problems transferring data over the system’s infrared interface, note the following: • Can the IrDA port on the pen tablet “see” the IrDA port on the other device? A direct line-of-sight path must exist between the ...

3-10 Care and Maintenance Audio Volume Too Low 3 If the audio volume on your pen tablet speaker or external headphones is too low, check the following: • Ensure that the speaker (or headphone output if using headphones) is enabled. To do so, tap the Speaker Mute hotpad. The system beeps when the spe...

Agency Notices A-1 Appendix A Agency Notices FCC Notices 3 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. Changes or modifications not expressly approved by Fujitsu Personal Systems, Inc., could void the user’s a...

A-4 Appendix operational, and safety requirements. The Department does not guarantee the equipment will operate to the user’s satisfaction. Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujits...

Agency Notices A-5 Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressement approuvée par Fujitsu Personal Systems, Inc., ou toute défaillance de l’équipement peut entrain...

Index-1 Index A AAAA battery, source, 3-6Audio jacks, 1-5auto adapter, 1-2 B bar code reader, 1-2, 1-10barrel button switch, 2-8battery charge contacts, 1-11battery charger, external, 1-2battery gauge, 2-10battery gauge icon, 1-7battery pack, 1-2 charging, 2-10charging time, 2-10critically low level...