Fisher & Paykel RS80A1 - Manuals

5 2  COMPONENTS Miscellaneous items (MI) pack Located inside the appliance U S E R G U I D E N Z AU G B I E H K S G I N U S AC T I V E S M A R T ™ I N T E G R AT E D R E F R I G E R ATO R RS90A, RS9120W, RS36A72, RS36A80 & RS36W80 models S E RV I C E & WA R R A N T Y S E RV I C E E T G A R A...

6 Door panel set Not supplied and must be purchased separately Stainless steel (Fisher & Paykel) door panel set: Includes 2x French door panels and 1x drawer panel. Custom door panel set: Supplied by customer to match their cabinetry.Applicable for non water-dispensing models. Non-Water dispensi...

7 b F G c D A H E b F G 4  APPLIANCE AND CAVITY DIMENSIONS RS80 RS90 APPLIANCE DIMENSIONS mm mm A Overall height of appliance * 1798 ** 1798** B Overall width of appliance 790 890 c Overall depth of appliance (without door panels and hanging brackets) 602 602 D Overall depth of appliance (includes h...

8 FRAMELESS CABINETRY (Aligns the appliance with the cabinetry) Proud installation Flush installation Note: Drawings are only for reference and not the actual cavity width of the cabinetry. FRAMED CABINETRY (Aligns the appliance with the frame of the cabinetry) 5  CABINETRY OPTIONS

9 ISO VIEW H F D i g A B PROFILE VIEW D g A E C h ISO VIEW 6  DOOR PANEL DIMENSIONS IMPORTANT! Custom door panels can only be used for non-Water dispensing models. RS80  RS90  DOOR PANEL DIMENSIONS (STAINLESS STEEL/CUSTOM * ) mm mm A Height of each top door panel 1096 1096 B Width of each top door p...

10 7  CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS80 Dimensions apply for the preparation and installation of custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com . Ensure handle is mounted 65mm from inner edge of panel to...

11 7  CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS90 Dimensions apply for the preparation and installation of custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com . Ensure handle is mounted 65mm from inner edge of panel to...

12 8  CUSTOM DOOR PANEL INSTALLATION TEMPLATE LEFT DOOR PANEL SIDE RIGHT DOOR PANEL SIDE This template is a single double-sided sheet used as a guide to drill screw holes for installing your Custom door and drawer panels. The actual template is included with this installation guide. Refer to ‘Door p...

13 9  DOOR CLEARANCE 90° DOOR OPENING 115° DOOR OPENING [FULL ROTATION] A B C D B C A E Wall 90° DOOR OPENING 90° DOOR OPENING 115° DOOR OPENING [FULL ROTATION] A B C D B C A E Wall 115° DOOR OPENING (FULL INTERNAL ACCESS) RS80 RS90 DOOR CLEARANCE DIMENSIONS mm mm A Depth of door (widest opening) me...

14 100mm 100mm ! REAR VIEW OF CAVITY IMPORTANT! ● Electrical connection should be located in an adjacent cabinet to either side of the appliance or above the appliance cavity. ● We recommend to use an isolating switch that is easily accessible to the user after the appliance is installed. WARNING! ●...

15 !0  ELECTRICAL AND PLUMBING Maximum distance of hose and power cord Power cord (excl.plug)  — 2050mm Water inlet hose*  — 3930mm RIGHT HAND SIDE Power cord (excl.plug)  — 2050mm Water inlet hose*  — 3180mm LEFT HAND SIDE Water inlet hose*  — 2250mm Power cord (excl.plug)  — 800mm * Applicable to ...

16 4 Restrain the appliance to the cart with straps. 5 Remove the brackets on the other side of the appliance. 6 Tilt the appliance backward onto the cart. 7 Set aside the pallet and push the cart to the installation location. 2 Tilt the appliance slightly to the opposite side. 3 Insert the hand tru...

17 !1  BEFORE INSTALLATION IMPORTANT! ● Your appliance is fitted with front and rear rollers designed for moving the appliance forward and backward. Do not move the appliance sideways as this may damage the rollers or the floor covering  /  surface. ● The appliance must be installed by a qualified i...

18 !2  CAVITY PREPARATION Internal box A Anti tip bracket kit Anti-tip bracket (1) Masonry plug (4) #10x40 Pan Head Philips S cr ew #10x40 Pan Head Philips S cr ew #10x40 cross-head screw (4) Tools Cross-head screwdriver Powered driver (optional) Pencil IMPORTANT! ● The anti-tip bracket and fittings...

19 IMPORTANT! ● The water connection instructions below are intended only for the professional installer. ● The appliance comes with a pre-connected plastic water tubing. ● Water fittings are not supplied and must be purchased separately. ● Ensure the appliance is connected to its own isolating swit...

20 Connect to power supply 1 Locate the power cord and connect the fitted plug to the electrical supply (230VAC, 50Hz). Turn ON the appliance. – We recommend to use an isolating switch that can be accessed easily after the appliance is installed. Alternative water and electrical connection (above th...

21 WARNING! ● Be careful when working with the appliance outside of the finished enclosure. ● Ensure that the appliance is secured to prevent tipping forward. Tipping of appliance can lead to serious injury or death. Internal box X Install fasteners kit M5 x 10 Pan Head Philips S cr ew M5 x 10 Pan H...

22 !6  POSITIONING INTO CABINETRY Position the appliance into the cabinetry 1 Ensure the power cord are secured to the clip at the back of the appliance ( A ) and the excess water hose coiled flat behind the appliance. 2 Push the appliance into the cabinetry until the anti-tip bracket overlaps the r...

23 Align appliance inside the cabinetry 1 Centre the appliance within the alcove, using the adjacent walls as a guide. 2 Raise the front of the appliance until the fixing brackets contact the ceiling of the enclosure ( A ). z Turn the front and rear adjusting nuts ( B ) clockwise to raise the roller...

24 IMPORTANT! ● Follow these steps to avoid difficulties in door panel adjustment and cosmetic cap fitment. ● Ensure to protect the finish of the Stainless steel door panels. ● For non-water dispensing door panels: Leave the protective film on the panels when hanging and remove the film only when in...

26 B D C A E Tools Cross-head screwdriver Powered driver (optional) Hex key FPA spanner !8  DOOR PANEL INSTALLATION — STAINLESS STEEL Attach the door panels 1 Open the door and loosen the M5x10 cross-head screws (do not remove) at the sides of the doors ( A ). 2 Hang the door panel by inserting the ...

27 Adjust the door panels 1 Push the appliance into the cavity until the door panels are flush with adjacent cabinetry surface. 2 Place a ruler on the front of the appliance to check flushness top and bottom, left and right.. IMPORTANT! ● Follow these steps to avoid difficulties in door panel adjust...

28 back side of door panel front side of door panel IMPORTANT! ● The template is a single sheet with one side used for the left door panel / drawer panel and the other side for the right door panel. ● The template should be placed on the back side of the door panel. Using the installation template (...

29 !9  DOOR PANEL INSTALLATION — CUSTOM back side of door panel front side of door panel IMPORTANT! ● Flip the template over to use for the right top door panel. ● The template should be placed on the back side of the door panel. 1 DRAWER PANEL TOP EDGE LH DOOR P ANEL HINGE SIDE LH DOOR P ANEL HANDL...

30 !9  DOOR PANEL INSTALLATION — CUSTOM back side of drawer panel front side of door panel IMPORTANT! ● Use left door panel template to use for the drawer panel. ● Place the template at the back side of the drawer panel. Using the installation template (for drawer panel) DRAWER PANEL TOP EDGE LH DOO...

32 Attach the door panels 1 Open the door and loosen the M5x10 cross-head screws (do not remove) at the sides of the doors ( A ). 2 Hang the door panel by inserting the M8 studs through the holes of the hanging bracket ( B ). 3 Slide the forks of the side brackets onto the screws of the door ( C ). ...

34 Internal box X Install fasteners kit #8 x 19 Countersunk Twin T hr ead Posi Scr ew #8 x 19 Countersunk Twin Thread Posi Screw #8Gx19 twin thread screw (2) Tools Cross-head screwdriver Powered driver (optional) Secure the hinge bracket to cabinetry 1 Secure the hinge bracket to the ceiling of the ...

35 IMPORTANT! ● The water filter head must be firmly pushed into the appliance and secured. incorrect installation can lead to water leaks. 4 Align the filter removal tool over the filter handle and turn 90° clockwise to tighten ( B ). Remove filter removal tool and close the freezer drawer. IMPORTA...

36 B A Install the toe kick filter and grille 1 Fit the filter onto the rails and push until it clips securely ( A ). 2 Align the top grille clips to the top plinth slots. Ensure the top grille is in the correct orientation ( B ). 3 Push the grille firmly onto the appliance until the clips engage ( ...

37 Attach the covers 1 Open the French doors. Attach the top covers ( A ) firmly over the top studs, and the side covers ( B ) to the side brackets. Attach the door side trims 2 Install the side trims by inserting into the panel gaps on each side of the door(s) ( C ). Align the trim to the top of th...

F I S H E R PAY K E L .CO M © Fisher & Paykel Appliances 2019. All rights reserved. The appliance specifications in this document apply to the specific appliances and models described at the date of issue. Under our policy of continuous appliance improvement, these specifications may change at a...