Page 3 - SAVE THESE INSTRUCTIONS; CONTENTS
1 @0 FIXING TO CABINETRY @1 WATER FILTER INSTALLATION @2 TOE KICK INSTALLATION @3 COVERS AND TRIMS INSTALLATION @4 FINAL CHECKLIST !8 DOOR PANEL INSTALLATION — STAINLESS STEEL !9 DOOR PANEL INSTALLATION — CUSTOM OR IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this installation guide...
Page 5 - SAFETY AND WARNINGS
3 IMPORTANT! ● It is very important for the installer to follow the instructions in this installation guide to ensure proper installation and operation of the appliance. Ensure that you read the installation guide thoroughly and understand all information. ● The water connection to your Ice and wate...
Page 6 - COMPONENTS; Located inside appliance; AAZZ; Top cover; External box; Taped to back panel of appliance
4 2 COMPONENTS Internal box (Installation kit) Located inside appliance AAZZ Anti-tip bracket assembly kit Anti-tip bracket (1) Masonry plug (4) #10x40 Pan Head Philips S cr ew #10x40 Pan Head Philips S cr ew #10x40 cross-head screw (4) B Door panel attachment kit Side bracket (10) Side strap (10)...
Page 7 - Located inside the appliance; Ice and Water display
5 2 COMPONENTS Miscellaneous items (MI) pack Located inside the appliance U S E R G U I D E N Z AU G B I E H K S G I N U S AC T I V E S M A R T ™ I N T E G R AT E D R E F R I G E R ATO R RS90A, RS9120W, RS36A72, RS36A80 & RS36W80 models S E RV I C E & WA R R A N T Y S E RV I C E E T G A R A...
Page 8 - Door panel set; Not supplied; Door handle kit; Included in internal box; Required tools; Not included with appliance
6 Door panel set Not supplied and must be purchased separately Stainless steel (Fisher & Paykel) door panel set: Includes 2x French door panels and 1x drawer panel. Custom door panel set: Supplied by customer to match their cabinetry.Applicable for non water-dispensing models. Non-Water dispensi...
Page 9 - APPLIANCE AND CAVITY DIMENSIONS; (without door panels and hanging; Flush install
7 b F G c D A H E b F G 4 APPLIANCE AND CAVITY DIMENSIONS RS80 RS90 APPLIANCE DIMENSIONS mm mm A Overall height of appliance * 1798 ** 1798** B Overall width of appliance 790 890 c Overall depth of appliance (without door panels and hanging brackets) 602 602 D Overall depth of appliance (includes h...
Page 10 - FRAMELESS CABINETRY; (Aligns the appliance with the cabinetry); FRAMED CABINETRY; (Aligns the appliance with the frame of the cabinetry); CABINETRY OPTIONS
8 FRAMELESS CABINETRY (Aligns the appliance with the cabinetry) Proud installation Flush installation Note: Drawings are only for reference and not the actual cavity width of the cabinetry. FRAMED CABINETRY (Aligns the appliance with the frame of the cabinetry) 5 CABINETRY OPTIONS
Page 11 - DOOR PANEL DIMENSIONS; DOOR PANEL DIMENSIONS (STAINLESS STEEL/CUSTOM; ISO VIEW
9 ISO VIEW H F D i g A B PROFILE VIEW D g A E C h ISO VIEW 6 DOOR PANEL DIMENSIONS IMPORTANT! Custom door panels can only be used for non-Water dispensing models. RS80 RS90 DOOR PANEL DIMENSIONS (STAINLESS STEEL/CUSTOM * ) mm mm A Height of each top door panel 1096 1096 B Width of each top door p...
Page 12 - CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS80; For; TOP PANEL — REAR VIEW; All measurements to be made; BOTTOM PANEL — REAR VIEW
10 7 CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS80 Dimensions apply for the preparation and installation of custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com . Ensure handle is mounted 65mm from inner edge of panel to...
Page 13 - CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS90
11 7 CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS90 Dimensions apply for the preparation and installation of custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com . Ensure handle is mounted 65mm from inner edge of panel to...
Page 14 - CUSTOM DOOR PANEL INSTALLATION TEMPLATE; LEFT DOOR; This template is a single double-sided sheet used as a
12 8 CUSTOM DOOR PANEL INSTALLATION TEMPLATE LEFT DOOR PANEL SIDE RIGHT DOOR PANEL SIDE This template is a single double-sided sheet used as a guide to drill screw holes for installing your Custom door and drawer panels. The actual template is included with this installation guide. Refer to ‘Door p...
Page 15 - DOOR CLEARANCE; B C; 0° DOOR OPENING; Wall; Depth of door (widest opening) measured from front of door; full internal access); Minimum door clearance* to adjacent wall; reduced internal access); Insert the hinge limiting pin vertically into the bore hole.
13 9 DOOR CLEARANCE 90° DOOR OPENING 115° DOOR OPENING [FULL ROTATION] A B C D B C A E Wall 90° DOOR OPENING 90° DOOR OPENING 115° DOOR OPENING [FULL ROTATION] A B C D B C A E Wall 115° DOOR OPENING (FULL INTERNAL ACCESS) RS80 RS90 DOOR CLEARANCE DIMENSIONS mm mm A Depth of door (widest opening) me...
Page 16 - REAR VIEW OF CAVITY; behind the appliance and must not protrude from the back wall.; Floor; ELECTRICAL AND PLUMBING
14 100mm 100mm ! REAR VIEW OF CAVITY IMPORTANT! ● Electrical connection should be located in an adjacent cabinet to either side of the appliance or above the appliance cavity. ● We recommend to use an isolating switch that is easily accessible to the user after the appliance is installed. WARNING! ●...
Page 17 - Maximum distance of hose and power cord; Water inlet hose* — 3930mm; RIGHT HAND SIDE; Water inlet hose* — 3180mm; LEFT HAND SIDE; Water inlet hose* — 2250mm; ELECTRICAL SPECIFICATIONS
15 !0 ELECTRICAL AND PLUMBING Maximum distance of hose and power cord Power cord (excl.plug) — 2050mm Water inlet hose* — 3930mm RIGHT HAND SIDE Power cord (excl.plug) — 2050mm Water inlet hose* — 3180mm LEFT HAND SIDE Water inlet hose* — 2250mm Power cord (excl.plug) — 800mm * Applicable to ...
Page 18 - Installation kit; BEFORE INSTALLATION
16 4 Restrain the appliance to the cart with straps. 5 Remove the brackets on the other side of the appliance. 6 Tilt the appliance backward onto the cart. 7 Set aside the pallet and push the cart to the installation location. 2 Tilt the appliance slightly to the opposite side. 3 Insert the hand tru...
Page 19 - rollers or the floor covering / surface.; Check the cabinetry
17 !1 BEFORE INSTALLATION IMPORTANT! ● Your appliance is fitted with front and rear rollers designed for moving the appliance forward and backward. Do not move the appliance sideways as this may damage the rollers or the floor covering / surface. ● The appliance must be installed by a qualified i...
Page 20 - CAVITY PREPARATION; Anti tip; Cross-head screwdriver; For wooden / plaster board wall installation:
18 !2 CAVITY PREPARATION Internal box A Anti tip bracket kit Anti-tip bracket (1) Masonry plug (4) #10x40 Pan Head Philips S cr ew #10x40 Pan Head Philips S cr ew #10x40 cross-head screw (4) Tools Cross-head screwdriver Powered driver (optional) Pencil IMPORTANT! ● The anti-tip bracket and fittings...
Page 21 - WATER SUPPLY CONNECTION
19 IMPORTANT! ● The water connection instructions below are intended only for the professional installer. ● The appliance comes with a pre-connected plastic water tubing. ● Water fittings are not supplied and must be purchased separately. ● Ensure the appliance is connected to its own isolating swit...
Page 22 - and alternative water and power connections.; DETAIL B; Internal box; Miscellaneous; POWER SUPPLY CONNECTION
20 Connect to power supply 1 Locate the power cord and connect the fitted plug to the electrical supply (230VAC, 50Hz). Turn ON the appliance. – We recommend to use an isolating switch that can be accessed easily after the appliance is installed. Alternative water and electrical connection (above th...
Page 23 - Install; Tools; Remove hinge end caps; Repeat this process for all appliance doors.; INSTALLATION PREPARATION
21 WARNING! ● Be careful when working with the appliance outside of the finished enclosure. ● Ensure that the appliance is secured to prevent tipping forward. Tipping of appliance can lead to serious injury or death. Internal box X Install fasteners kit M5 x 10 Pan Head Philips S cr ew M5 x 10 Pan H...
Page 24 - POSITIONING INTO CABINETRY; Position the appliance into the cabinetry; overlap
22 !6 POSITIONING INTO CABINETRY Position the appliance into the cabinetry 1 Ensure the power cord are secured to the clip at the back of the appliance ( A ) and the excess water hose coiled flat behind the appliance. 2 Push the appliance into the cabinetry until the anti-tip bracket overlaps the r...
Page 25 - Hex key; ALIGNING INSIDE CABINETRY; Rear roller adjustment
23 Align appliance inside the cabinetry 1 Centre the appliance within the alcove, using the adjacent walls as a guide. 2 Raise the front of the appliance until the fixing brackets contact the ceiling of the enclosure ( A ). z Turn the front and rear adjusting nuts ( B ) clockwise to raise the roller...
Page 26 - DOOR PANEL INSTALLATION — STAINLESS STEEL
24 IMPORTANT! ● Follow these steps to avoid difficulties in door panel adjustment and cosmetic cap fitment. ● Ensure to protect the finish of the Stainless steel door panels. ● For non-water dispensing door panels: Leave the protective film on the panels when hanging and remove the film only when in...
Page 28 - Attach the door panels; Open the door and loosen the M5x10 cross-head
26 B D C A E Tools Cross-head screwdriver Powered driver (optional) Hex key FPA spanner !8 DOOR PANEL INSTALLATION — STAINLESS STEEL Attach the door panels 1 Open the door and loosen the M5x10 cross-head screws (do not remove) at the sides of the doors ( A ). 2 Hang the door panel by inserting the ...
Page 29 - Adjust the door panels; Door panel; Repeat for all door panels.
27 Adjust the door panels 1 Push the appliance into the cavity until the door panels are flush with adjacent cabinetry surface. 2 Place a ruler on the front of the appliance to check flushness top and bottom, left and right.. IMPORTANT! ● Follow these steps to avoid difficulties in door panel adjust...
Page 30 - DOOR PANEL INSTALLATION — CUSTOM
28 back side of door panel front side of door panel IMPORTANT! ● The template is a single sheet with one side used for the left door panel / drawer panel and the other side for the right door panel. ● The template should be placed on the back side of the door panel. Using the installation template (...
Page 31 - Flip the template over to use for the right top door panel.; Using the installation template
29 !9 DOOR PANEL INSTALLATION — CUSTOM back side of door panel front side of door panel IMPORTANT! ● Flip the template over to use for the right top door panel. ● The template should be placed on the back side of the door panel. 1 DRAWER PANEL TOP EDGE LH DOOR P ANEL HINGE SIDE LH DOOR P ANEL HANDL...
Page 32 - Use left door panel template to use for the drawer panel.
30 !9 DOOR PANEL INSTALLATION — CUSTOM back side of drawer panel front side of door panel IMPORTANT! ● Use left door panel template to use for the drawer panel. ● Place the template at the back side of the drawer panel. Using the installation template (for drawer panel) DRAWER PANEL TOP EDGE LH DOO...
Page 34 - Open the door and loosen the M5x10 cross-head screws
32 Attach the door panels 1 Open the door and loosen the M5x10 cross-head screws (do not remove) at the sides of the doors ( A ). 2 Hang the door panel by inserting the M8 studs through the holes of the hanging bracket ( B ). 3 Slide the forks of the side brackets onto the screws of the door ( C ). ...
Page 36 - Secure the hinge bracket to cabinetry; Repeat on the opposite side.; Reattach the hinge end caps; Reattach the left hinge end cap (; FIXING TO CABINETRY
34 Internal box X Install fasteners kit #8 x 19 Countersunk Twin T hr ead Posi Scr ew #8 x 19 Countersunk Twin Thread Posi Screw #8Gx19 twin thread screw (2) Tools Cross-head screwdriver Powered driver (optional) Secure the hinge bracket to cabinetry 1 Secure the hinge bracket to the ceiling of the ...
Page 37 - Remove the plastic wrapping of the new filter.; Filter in locked position; WATER FILTER INSTALLATION
35 IMPORTANT! ● The water filter head must be firmly pushed into the appliance and secured. incorrect installation can lead to water leaks. 4 Align the filter removal tool over the filter handle and turn 90° clockwise to tighten ( B ). Remove filter removal tool and close the freezer drawer. IMPORTA...
Page 38 - Install the toe kick filter and grille; Fit the filter onto the rails and push until it clips securely (; MI Pack; TOE KICK INSTALLATION
36 B A Install the toe kick filter and grille 1 Fit the filter onto the rails and push until it clips securely ( A ). 2 Align the top grille clips to the top plinth slots. Ensure the top grille is in the correct orientation ( B ). 3 Push the grille firmly onto the appliance until the clips engage ( ...
Page 39 - trim install kit; COVERS AND TRIMS INSTALLATION
37 Attach the covers 1 Open the French doors. Attach the top covers ( A ) firmly over the top studs, and the side covers ( B ) to the side brackets. Attach the door side trims 2 Install the side trims by inserting into the panel gaps on each side of the door(s) ( C ). Align the trim to the top of th...
Page 40 - F I S H E R PAY K E L .CO M; Complete and keep for safe reference:; TO BE COMPLETED BY THE INSTALLER; Check all parts are installed.; Ice and Water models only; Ensure the water filtration system has been flushed.; FINAL CHECKLIST
F I S H E R PAY K E L .CO M © Fisher & Paykel Appliances 2019. All rights reserved. The appliance specifications in this document apply to the specific appliances and models described at the date of issue. Under our policy of continuous appliance improvement, these specifications may change at a...
