Extech PRC30 - Manuals

6 PRC30-en-EU_V1.3 7/14 STORING VALUES INTO MEMORY There are 5 memory locations for each function. The default values stored in the locations are: Memory Location Type J, K, C, R, S, N Type T Type E T/C mV M1 0.0 o C (32.0 o F) 0.0 o C (32.0 o F) 0.0 o C (32.0 o F) 0mV M2 100.0 o C (212.0 o F) 100.0...

7 PRC30-en-EU_V1.3 7/14 Modes of Operation Temperature MEASURE (Input) Mode of Operation 1. Turn the meter ON. 2. “MEASURE” will appear in the display. 3. Press and Hold the MODE button for 1 second to select the temperature function. 4. Press and Hold the TYPE button to select the thermocouple type...

8 PRC30-en-EU_V1.3 7/14 Current and Voltage MEASURE (Input) Mode of Operation In this mode, the unit will measure up to 50mADC or 20VDC 1. Turn the meter ON. 2. “MEASURE” will appear in the display. 3. Press and hold the MODE button for 1 second to select mA, mA with loop power or mV 4. Connect the ...

9 PRC30-en-EU_V1.3 7/14 Tilt Stand / Hanger The rear stand is provides two methods for convenience in viewing. 1. Pull the bottom portion of the stand out to place the unit on a flat surface for viewing. 2. Pull the bottom and top portions of the stand out, and then rotate the stand to allow the uni...

10 PRC30-en-EU_V1.3 7/14 Specifications Display Dot matrix LCD Cold junction compensation 0.03°C per °C (0.02°F per °F) Thermocouple Standard and Scale NIST 175, ITS-90 Current output capability 24mADC at 1000 ohms Voltage input impedance 10kohms minimum Meter Power 6 AA batteries or AC adaptor Auto...