Extech EZ30 - Manual
Extech EZ30 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MAX MIN; Introduction; Display
- Page 3 – Operation; Meter Power; that a fresh 9V battery is installed.; Measuring Air Velocity and Temperature; Place the sensor in the air stream under test.; Selecting the Temperature unit of measure (; Press and hold the key for 3 seconds to turn the backlight on/off.; Record and Recall MAX / Min Function
- Page 5 – Useful Equations and Conversions; Measurements made in; Radius; Where
- Page 6 – Product specifications subject to change without notice; Warranty; Copyright
MAX MIN AVG
VEL
˚
˚
UNITS
User's Guide
EzFlex™ Thermo-Anemometer
Model EZ30
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model EZ30 Version 1.1 04/06 2 MAX MIN AVG VEL ˚ ˚ UNITS 1 2 3 4 5 6 MAX MIN V EL ˚ ˚ 1 2 3 4 5 6 7 8 Introduction Congratulations on your purchase of the Extech EZ30 Thermo-Anemometer. The EZ30 measures air velocity in five units of measure: feet per minute (ft/min), meters per second (m/sec), mile...
Model EZ30 Version 1.1 04/06 3 Operation Meter Power 1. Press the POWER button to turn the meter on. If the display does not switch on, check that a fresh 9V battery is installed. 2. Press the POWER button to turn the meter off. 3. The meter is equipped with an AUTO POWER OFF feature. The meter auto...
Model EZ30 Version 1.1 04/06 5 Useful Equations and Conversions Volume Measurements To determine CFM (cubic feet per minute) or CMM (cubic meters per minute) in a duct, the area of the duct must first be measured (use the equations below). Then multiply an air velocity measurement by the area measur...
