Extech EZ30 - Manuals

Extech EZ30 – Manual in PDF format online.

Manuals:

Manual Extech EZ30

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6

Summary

Page 2 - MAX MIN; Introduction; Display

Model EZ30 Version 1.1 04/06 2 MAX MIN AVG VEL ˚ ˚ UNITS 1 2 3 4 5 6 MAX MIN V EL ˚ ˚ 1 2 3 4 5 6 7 8 Introduction Congratulations on your purchase of the Extech EZ30 Thermo-Anemometer. The EZ30 measures air velocity in five units of measure: feet per minute (ft/min), meters per second (m/sec), mile...

Page 3 - Operation; Meter Power; that a fresh 9V battery is installed.; Measuring Air Velocity and Temperature; Place the sensor in the air stream under test.; Selecting the Temperature unit of measure (; Press and hold the key for 3 seconds to turn the backlight on/off.; Record and Recall MAX / Min Function

Model EZ30 Version 1.1 04/06 3 Operation Meter Power 1. Press the POWER button to turn the meter on. If the display does not switch on, check that a fresh 9V battery is installed. 2. Press the POWER button to turn the meter off. 3. The meter is equipped with an AUTO POWER OFF feature. The meter auto...

Page 5 - Useful Equations and Conversions; Measurements made in; Radius; Where

Model EZ30 Version 1.1 04/06 5 Useful Equations and Conversions Volume Measurements To determine CFM (cubic feet per minute) or CMM (cubic meters per minute) in a duct, the area of the duct must first be measured (use the equations below). Then multiply an air velocity measurement by the area measur...

Extech Manuals