Extech 412400 - Manuals

Extech 412400 – Manual in PDF format online.

Manuals:

Manual Extech 412400

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 3 - Operation; POWER BUTTON AND AUTO POWER OFF FEATURE; test will display after which the LCD will stabilize.; APO; Read the measured value in the display; INPUT ZERO

412400-EU-EN v5.3 07/13 3 Operation POWER BUTTON AND AUTO POWER OFF FEATURE 1. Use the POWER button to turn the unit ON or OFF. When the unit is switched on, a short self- test will display after which the LCD will stabilize. 2. This meter is powered by six (6) ‘AA’ 1.5V batteries or by an AC adapto...

Page 5 - MANUAL Sourcing from stored memory values; Select the Source mode; Storing values into memory; Select and display a memory location (M1 to M5)

412400-EU-EN v5.3 07/13 5 MEMORY (MEM) BUTTON The calibrator has five (5) memory locations for each function for stepped calibration. Default output values are noted below. The memory locations/output values can be selected manually, or the series of five values can be stepped automatically for the ...

Page 6 - Battery Replacement

412400-EU-EN v5.3 07/13 6 Default Memory Values Five common source values are pre-programmed for each mode and stored in the Calibrator’s memory; the user can replace these values as needed; refer to the Table below: Default Memory Values M1 M2 M3 M4 M5 mV, V 0mV 2.50V 5.00V 7.50V 10.00V mA 4mA 8mA ...

Extech Manuals