Extech 412400 - Manual
Extech 412400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Operation; POWER BUTTON AND AUTO POWER OFF FEATURE; test will display after which the LCD will stabilize.; APO; Read the measured value in the display; INPUT ZERO
- Page 5 – MANUAL Sourcing from stored memory values; Select the Source mode; Storing values into memory; Select and display a memory location (M1 to M5)
- Page 6 – Battery Replacement
- Page 7 – Specifications; Copyright; ISO
User's Guide
Model 412400
Multifunction Process Calibrator
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
412400-EU-EN v5.3 07/13 3 Operation POWER BUTTON AND AUTO POWER OFF FEATURE 1. Use the POWER button to turn the unit ON or OFF. When the unit is switched on, a short self- test will display after which the LCD will stabilize. 2. This meter is powered by six (6) ‘AA’ 1.5V batteries or by an AC adapto...
412400-EU-EN v5.3 07/13 5 MEMORY (MEM) BUTTON The calibrator has five (5) memory locations for each function for stepped calibration. Default output values are noted below. The memory locations/output values can be selected manually, or the series of five values can be stepped automatically for the ...
412400-EU-EN v5.3 07/13 6 Default Memory Values Five common source values are pre-programmed for each mode and stored in the Calibrator’s memory; the user can replace these values as needed; refer to the Table below: Default Memory Values M1 M2 M3 M4 M5 mV, V 0mV 2.50V 5.00V 7.50V 10.00V mA 4mA 8mA ...
