EMAX HSP07V080V3 - Manuals

EMAX HSP07V080V3 Compressor – User Manual in PDF format online.

Manuals:

User Manual

User Manual EMAX HSP07V080V3

Summary

Page 2 - Contents

1 PISTON COMPRESSOR MANUAL REV022621 Contents Safety Information 2-3 Breathable Air 3 Pressurized Components 3 Personal Protective Equipment 3 Nomenclature 4 Features and Extras 5-7 Pump Riser 5 Belt Tensioner 5 Continuous Run 6 Automatic Tank Drain 7 Installation 8-16 Area 8 Lifting and Movement 9 ...

Page 3 - NEVER modify the compressor and/or controls in any way.

2 PISTON COMPRESSOR MANUAL REV022621 SAFTEY INFORMATION This manual contains very important information to know and understand. This is to provide for SAFTEY and to PREVENT EQUIPMENT PROBLEMS. To help understand this information, observe the following: DANGER: Danger indicates and imminently hazardo...

Page 4 - CFR 1910 and any other Federal, State or Local codes or regulations; DO NOT; attempt to open the valve while the; CAUTION: DO NOT PULL WITH

3 PISTON COMPRESSOR MANUAL REV022621 BREATHABLE AIR 1. NEVER use air from this compressor for breathable air except in full compliance with OSHA Standards 29 CFR 1910 and any other Federal, State or Local codes or regulations . 2. DO NOT use airline anti-icer systems in air lines supplying respirato...

Page 5 - Nomenclature

Page 6 - Risers

5 PISTON COMPRESSOR MANUAL REV022621 Features and Extras Compressors come in many shapes and sizes. Our units have several features that may or may not be present on your unit. These features may be purchased after the fact in kit form. This guide will explain the use and benefit of these features. ...

Page 7 - Continuous Run; Air flow is marked with an arrow.

6 PISTON COMPRESSOR MANUAL REV022621 Continuous Run Continuous run allows the pump to turn continuously, hence the name. In this mode the unit pumps up to 140 PSI and then the valves are held close. This allows the pump to enter a free spin state where the unit is pulling in cold air and the simply ...

Page 8 - The drain attaches to a 1⁄2” NPT female connection.

7 PISTON COMPRESSOR MANUAL REV022621 Auto Drain Auto drains are preset timer valves that allow tank moisture to be vented as long as they are powered. The enemy of every compressor/air system is moisture. The auto drain removes some of the hassle of this by allowing the user to set a timer and walk ...

Page 9 - debris and foreign objects from blocking the intake pipe.; CAUTION: If ambient temperature drops below 32 ̊F, be

8 PISTON COMPRESSOR MANUAL REV022621 Installation Area 1. Install compressor in a clean, dry, and well-lit area. Be sure installation area can maintain a temperature range between 35˚ - 110˚ F. 2. Allow sufficient space around the compressor for maintenance access and adequate airflow. Mount unit wi...

Page 10 - Make sure lift operator stays aware while moving the compressor.

9 PISTON COMPRESSOR MANUAL REV022621 Lifting and Movement/Forklift 1. Make sure lift operator stays aware while moving the compressor. 2. Be sure to uncrate the compressor prior to movement. This will allow a visual reference for the balance of the unit. 3. Be sure the load is secure and well balanc...

Page 12 - Electrical Safety; Ensure incoming service has adequate ampere rating.; connect ground to air or cooling lines.

11 PISTON COMPRESSOR MANUAL REV022621 Electrical Safety 1. Follow all NEC and local codes for electrical wiring. Allow only authorized service personnel or certified electricians to install electrical components. 2. Put unit on a dedicated circuit and make sure no other electrical equipment is wired...

Page 13 - Wire size and breaker requirements for single phase units:**

12 PISTON COMPRESSOR MANUAL REV022621 1. Voltage should not vary more than 12% to ensure proper operation of the compressor. 2. Wire size and breaker requirements for single phase units:** Motor Horsepower Breaker Size (Amps) Wire Size (50ft or less)* Wire Size (More than 50ft) Peak Start Amps (Lock...

Page 14 - Single phase unit WITH magnetic starter:

13 PISTON COMPRESSOR MANUAL REV022621 5. Single phase unit WITH magnetic starter:

Page 16 - manufacturer’s recommendations.; CFM

15 PISTON COMPRESSOR MANUAL REV022621 Piping (Safety steps) 1. Install appropriate flow-limiting valves as necessary according to pipe size(s) used and run lengths. This will reduce pressure in case of hose failure, per OSHA Standard 29 CFR 1926.302(b)(7). 2. Flow-limiting valve are listed by pipe s...

Page 19 - section for; TAKE CARE; when lowering pressure not to back the adjustor; FAILURE; to reinstall acorn nut, seals, or set nuts can result in

18 PISTON COMPRESSOR MANUAL REV022621 Operation Ensure all personnel that work around or operate the compressor have read this manual and are well versed in the operation of this machinery. NEVER allow untrained personnel to operate this unit. 1. Once the inspection is completed, open your discharge...

Page 20 - Item

19 PISTON COMPRESSOR MANUAL REV022621 Maintenance Compressor maintenance must be performed as described in the maintenance schedule, failure to do may lead to compressor/component breakdown and void compressor warranty. Maintenance Schedule The table below is a generalized maintenance schedule based...

Page 21 - Oil Choice; Compressor oil is not trash and; MUST NOT; Remove oil filter and clean with a mild solvent.

20 PISTON COMPRESSOR MANUAL REV022621 Air Filter(s)* See Comments Air filters should be changed after the first 100-hour break in period and every 90 days after that. The frequency will increase in environments with air contaminants such as dust, paint, dirt, etc. Oil* See Comments Oil should be cha...

Page 22 - Troubleshooting; Issue; CONSTANT CFM

21 PISTON COMPRESSOR MANUAL REV022621 Troubleshooting Some unit issues can be fixed simply by verifying the following guide. It is advised to go through the guide prior to calling technical support to help expedite the assistance process. Issue Action Compressor does not run Check unit power supply....

Page 23 - Warranty Statement; ave a redundant compressor.; TM and following all routine; SMART OIL; TM extended auto ship; SMART OIL; TM not only extends the life of your

22 PISTON COMPRESSOR MANUAL REV022621 Warranty Statement • Standard Warranty: That each compressor unit is free from defects in material, workmanship, and parts for 1 year from the date of delivery. This Standard Warranty includes 1 year of warranty labor from an authorized technician. Manufacturer ...

Page 24 - Limited Lifetime Warranty is not prorated and has no hour limits.; Required maintenance schedule to maintain warranty status.

23 PISTON COMPRESSOR MANUAL REV022621 Limited Lifetime Warranty is not prorated and has no hour limits. **Limited Lifetime Warranty, non-prorated, no hour limits. In the case the product has been discontinued at any point the Limited lifetime Pump warranty will last five years past the discontinued ...

Page 25 - FAILURE TO PROVIDE

24 PISTON COMPRESSOR MANUAL REV022621 Warranty shall be voided under the following conditions: Exposing electrical components to rain or water or installing the unit in a hostile environment such as acid vapors or any caustic or abrasive matter that may be ingested into the pump or installing the un...