Edimax PT-31W - Manuals
Edimax PT-31W – Manual in PDF format online.
Manuals:
Manual Edimax PT-31W
Summary
1 COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical...
2 CONTENTS CHAPTER I: PRODUCT INFORMATION ............................................................................................................... 4 1-1 Package Contents ..............................................................................................................................
4 CHAPTER I: PRODUCT INFORMATION 1-1 Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): 1 x Network camera 1 x Power adapter 1 x Ethernet cable 1 x Mounting kit 1 x CD with ut...
7 second. IP camera will connect AP and set value during 5 ~10 seconds. 4 - DI/DO connectors Digital input / output dry contacts. Connects to external peripherals by wire. See next page for pin definitions. WARNING: DO NOT CONNECT POWERED CABLE! 5 – ETHERNET Connect to your local area network by Eth...
11 Chapter II Using Network IP Camera by Web Interface 2.1 Locate the IP address of Network IP Camera You can use your new Network IP Camera by its web user interface via web browser. Currently the viewing system requirement for Network IP camera is: ■ OS: Microsoft Windows XP/Vista/7 ■ Browser: IE7...
15 After ActiveX plugin is installed, you should be able to see the video stream from camera. NOTE: If this is the first time you use this IP Camera, you can refer to chapter 2.4 for instructions on Setup Wizard, which will guide you to complete the software setup of your new IP Camera. 2.3 Viewing ...
19 Here are the descriptions of every setup item: Item Description RTSP Select this option to use RTSP (Real-Time Streaming Protocol) to transfer video data. HTTP Select this option to use HTTP (Hyper-Text Transfer Protocol) to transfer video data. If you don’t know which one you should use, select ...
20 Chapter III Advanced Configuration If you wish to configure IP camera’s settings, you can access IP camera’s ‘Configuration’ menu, which provides various kinds of system setting. To access configuration menu, click ‘Configuration’ button on the left. The ‘Configuration’ submenu will appear, pleas...
21 Here are the descriptions of every setup item: Item Description Host Name Input the IP camera’s hostname here, it can be any meaningful words or characters that will help you to identify this IP camera. You can use IP camera’s installation location as host name, and this will help you to identify...
22 Please note that if this IP camera can’t access Internet, you must have a time server on local area network, or set the time manually. Set Manually Set IP camera’s date and time manually. Please set current date and time by ‘Date’ and ‘Time’ dropdown menu. When you finish with above settings, cli...
23 Here are the descriptions of every setup item: Item Description Password / Retype Password (Administrator) Input administrator’s new password in both ‘Password’ and ‘Retype Password’ field, and click ‘Modify’ button to change administrator’s password. Please note: Don’t forget administrator’s pas...
24 3-3 Network You can configure the network camera’s general and advanced network settings here. 3-3-1 “General” Setup Page Set up IP address for this IP camera. This IP camera supports both IPv4 and IPv6 IP address. Here are the descriptions of every setup item: Item Description LAN Select this op...
28 you. You must register a dynamic IP service first. Currently this IP camera supports Dyndns, TZO and No-ip dynamic IP service.. Provider: Select dynamic IP service provider. Host Name: Input the host name you obtained from dynamic IP service provider. User name: Input user name used to login dyna...
29 The descriptions of every setting in this menu will be given below: Item Description Wireless Connection Select „Enable‟ to activate wireless network function of this IP camera, select „Disable‟ to disable it. Network Type Select the network type of wireless connection. Available options are „Inf...
31 connection. Configure via Push Button Click this button and this camera will enter PBC-style WPS connection state for 120 seconds. Please push „Start PBC‟ button on the wireless access point you wish to connect within 120 seconds to establish WPS connection (The remaining time will be displayed o...
32 Method 2: USE PINCODE SETTING Step 1: Power on the wireless AP and the wireless network camera. Wait for 1 minute for both devices to be up and running. Step 2: Open web browser and logo in wireless server. Go to wireless/WPS setting page. Step 3: Open web browser and logo in wireless network cam...
33 3-4 IP Filter When this IP camera is directly connected to Internet and not protected by firewall, this function acts like a mini built-in firewall to protect the safety of this IP camera and avoid attacks from hackers. Here are the descriptions of every setup item: Item Description Enable Filter...
38 3-5-3 Overlay Setting You can adjust the video overlay parameters in this page. Here are the descriptions of every setup item: Item Description Enable Time Stamp Check this box to enable overlaying time stamp on video. Remove the background color of the text (for Time Stamp) Check this box to rem...
39 ‘Update’ button to use the picture. Please note that there are certain restrictions: - Select .bmp / .jpg / .jpeg image files only. - Image’s resolution should be less than 160 x 128, and can be divided by 4. - Do not upload image files that size is greater than 64KB. When you finish with above s...
40 Enable Speaker (Speaker) Check this box to enable speaker. If you don’t want people at IP camera to hear you, you can uncheck this box to disable it. Audio Type (Speaker) The format is fixed as G.711 When you finish with above settings, click ‘Apply’ button to save changes. 3-7 Motion This IP cam...
45 Item Description Enable Setting Check this box to enable this event. If you just want to disable this event temporarily, you can uncheck this box to keep this event and disabling while not deleting it. Title Input any description text for this event so you can identify it quickly. You can use alp...
46 3-9-2 Media You can define what kind of media file should be saved on designated media. Here are the descriptions of every setup item: Item Description One Snapshot Save a picture file when event is triggered. H.264 Video Save a H.264 video clip. You can also select the recording length before an...
47 3-9-3 Event Server You can define the details of remote media server: FTP (File), SMTP (Email), and Samba (File). A Samba server can be any computer running windows operating system with network neighbor function enabled. Many stand-alone network file server also support samba server function. He...
50 3-10 Recording to SD Card When a SD card is inserted into IP camera, you can save video files on it. Note: 1. Be sure that the SD Card format should be FAT32. The NTFS format cannot be supported by this camera. 2. Unlink motion detection, this function will record video at specified time period o...
51 3-11 SDHC The IP camera module has an optional SD card slot PCBA board. The standard module does not include this board. The UI shows the capacity is 0 MB when the module without SD card slot and memory card. f you need the function please check the option when you place the order of the IP camer...
53 3-12 Log You can check the usage log of IP camera here. In this page, you can click: 1. First page / Final page: Jump to first / final page of log. 2. Previous / Next: Jump to previous or next page of log. 3. Remove: Clear log. You’ll be prompted for confirmation.
55 3-14 Maintenance You can do some maintenance job about this IP camera here. Here are the descriptions of every setup item: Item Description Reboot Click this button to reboot the IP camera. This function is useful when you find IP camera is not working properly. Reset Clear all settings of IP cam...
56 Upgrade Upgrade IP camera’s firmware. Click ‘Browse’ button to select a firmware image file on your computer first, then click ‘Upgrade’ button. 3-15 Language You can change the display language of web interface. Click ‘Language’ button and select one language. More languages may available in lat...
57 CHAPTER IV: EDIVIEW 64-CHANNEL VIEWER 4-1 EdiView Installation Please follow the following instructions to setup EdiView on Windows Vista / 7 operating system. Please note: You must login as system administrator when you’re installing EdiView . 1. Locate EdiView setup file, and double-click on it...
60 6. The second part of installation will start automatically. 7. A new setup window will appear, please click ‘Next’ button to continue. 8. You can select a folder on your computer to install EdiView by clicking ‘Change’ button, or simply click ‘Next’ button directly to accept default folder.
62 11. Click ‘Finish’ when you see this message. EdiView is ready to use now. 12. MSDE (Microsoft SQL Database Engine) installation procedure will start at the same time. Please wait until it completes.
64 14. MSDE installation requires computer reboot to complete, click ‘Finish’ to reboot the computer. 15. A new icon will appear on your computer’s desktop, you can double click on it to start EdiView. 4-2 EdiView Interface To start EdiView , double-click EdiView icon on your computer’s desktop: Or ...
71 Date / Time, Remaining Disk Space Displays current date, time, and remaining disk storage space. Exit Click this button to leave EdiView All camera’s video will displayed in ‘Camera View’ area: (This example picture shows a 4-split camera view with only 2 IP cameras configured) To select an IP ca...
79 Use the mouse to click blocks on the grid pattern to assign the areas you wishes EdiView to detect / ignore motion. EdiView will detect motion for areas which are NOT covered by blocks only. To add or erase blocks: To add blocks, click + button; to erase blocks, click- button. Click ‘Reset’ butto...
82 you specified here, you’ll receive an alarm message to notify you should do something to prevent from running out of storage space. Start-up Condition Select the behavior of EdiView when computer starts up. You can select multiple options you want to use: Auto run, when Windows start: Check this ...
83 same domain name. Receiver: Input the E-mail receiver’s address here. CC: input additional E-mail receiver’s address here. Subject: Input the subject of sent E-mail. This will also help you to identify the E-mail sent by EdiView . Number of attachments: Input the number of snapshot attachments th...
85 A new window will appear on the right: You can configure a new schedule recording job here. The descriptions of every setup items are listed as follow: Item Description Weekly Schedule Select the time period in a week of this schedule. There are total 48 x 7 blocks in a week schedule, where every...
102 You can click ‘Save as’ button to save current image (you’ll be prompted for image saving location), or click ‘Print’ to print current image to printer. To back to previous menu, click ‘Cancel’; click ‘Reset’ to reset image parameters back to default value. Time Current time will be displayed he...
103 Chapter V Troubleshooting Please don’t panic when you found this IP Camera is not working properly. Before you send this IP Camera back to us, you can do some simple checks to save your time: Problem description Possible solution(s) Can’t connect to IP Camera 1) Please check the IP address of IP...
104 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential inst...
105 EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC. French: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2004/108/EC, 2006/95/EC....
106 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European directive 2004/108/EC and 2006/95/EC. Equipment: 3Mpx PoE Day & Night PT Network Camera Model No.: PT-31E Report...
107 Notice According to GNU General Public License Version 2 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive and EMC directive, ETSI. Equipment: 3Mp...
Edimax Manuals
-
Edimax EW-7711UMN
Manual
-
Edimax PS-1206U
Manual
-
Edimax LAN USB Adapter
Manual
-
Edimax EW-7708Pn
Manual
-
Edimax EW-7748In
Manual
-
Edimax EW-7128g
Manual
-
Edimax PS-1208UWg
Manual
-
Edimax EU-4207
Manual
-
Edimax EW-7727In
Manual
-
Edimax PS-1206PWg
Manual
-
Edimax PS-3103P
Manual
-
Edimax EW-7717Un
Manual
-
Edimax 802.11 b
Manual
-
Edimax EU-4230
Manual
-
Edimax PT-111E
Manual
-
Edimax EN-9130TXA
Manual
-
Edimax IC-7000
Manual
-
Edimax EW-7205AP
Manual
-
Edimax Draft 2.0-N
Manual
-
Edimax N-9210TX-64
Manual