Edimax Wireless LAN USB Adapter - Manual

Page 3 - Product Introduction; Laptop or Desktop computers.; Main Features; One USB Wireless LAN Adapter with One USB Cable

1 1. Product Introduction Thank you for purchasing nMAX Wireless LAN USB Adapter. This USB adapter is designed to comply with IEEE 802.11b/g/n draft 2.0 Wireless LAN standard and easy to carry with the Mini size. It is suitable for any Laptop or Desktop computers. This adapter supports higher data t...

Page 4 - Hardware Installation; insert the card when the computer is power off or on.

2 3. Hardware Installation Please follow the following instructions to install your new USB Wireless LAN Adapter: Step 1. Please insert the USB Wireless LAN Adapter into an available USB 2.0 port of your computer. You can insert the card when the computer is power off or on. Step 2. If your operatio...

Page 5 - click ‘Cancel’

3 If your operation system in Windows 2000/XP/XP64, the following message will appear on your computer, click ‘Cancel’ .

Page 6 - The following procedures are operated in

4 4. Setup Wizard This wizard can be run in Windows 2000/XP/XP64/Vista. The following procedures are operated in Windows Vista. 1. Insert the CD shipped along with the product into your CD-ROM drive. The Windows Vista will popup AutoPlay window, Please select “Install or run program” to execute Auto...

Page 7 - Please click ‘install’ to run the driver installation process.

5 3. Please read the end user license agreement and click ‘Yes’ to accept license agreement. 4. Please click ‘install’ to run the driver installation process. If you see ‘Found New Hardware’ message again, please ignore it and wait. .

Page 9 - The following procedures are operated in Windows 2000/XP/XP64.; device

7 The following procedures are operated in Windows 2000/XP/XP64. 1. Insert device driver CDROM into the CD/DVD ROM drive of your computer, the following screen will be displayed. Click “Setup Utility” to run the setup wizard. 2. Please read the end user license agreement and click ‘Yes’ to accept li...

Page 10 - If you see ‘Found New Hardware’ message

8 3. You can choose the configuration tool used to configure the wireless network card here. It’s recommended to select ‘Edimax Configuration Tool’, which provides fully access to all function of this wireless network card. If you prefer to use the wireless configuration tool provided by Windows XP,...

Page 11 - Please click ‘install’ to run the driver installation process.

9 5. Please click ‘install’ to run the driver installation process.

Page 12 - complete the driver installation process.

10 6. Please wait while the install procedure is running. When you see this message, please click ‘Finish’ to complete the driver installation process. 7. A new icon will appear at lower-right corner of your computer desktop, you can put the mouse cursor on the icon, and the status of wireless card ...

Page 13 - If you want to close configuration utility, please click ‘Exit’.

11 8. When you want to configure your wireless connection, please right click on this icon, and a popup menu will appear. You can click ‘Launch Config Utilities’ to start configuration program. If you want to close configuration utility, please click ‘Exit’.

Page 14 - Connect to Wireless Access Point; Using Configuration Utility to Connect to Wireless Access Point

12 5. Connect to Wireless Access Point Using Configuration Utility to Connect to Wireless Access Point 1. After installation is complete, wireless configuration utility will be shown as an icon at the lower-right corner of your windows desktop. Please click the icon by right mouse key, and select ‘L...

Edimax Wireless LAN USB Adapter - Manual

Table of Contents:

Summary

Other Edimax Models