Edimax IC-9000 - Manual
Edimax IC-9000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Interface Information
- Page 6 – Hardware Installation; Connect the other end of the Ethernet cable to the home
- Page 7 – Software Installation; Before installing CamView software on your PC or laptop, please
- Page 8 – Start to Use CamView Software; To save the found Cam ID on your PC, simply drag it from
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4. Interface Information Item No. Name Description 1 Ethernet Indication LED (blue) Indicates if the Ethernet link is ok and packet traffic is sending/receiving. When the Ethernet cable is connected, the LED is constant blue light. When there is packet sending/receiving, the LED is blinking blue lig...
5. Hardware Installation Please follow the following instructions to set up the IC-9000: 1. Please connect the IP CAM accessories to the body of the IC-9000 correctly, including the bracket, power adapter and Ethernet cable, as shown in the above figure. 2. Connect the other end of the Ethernet cabl...
6. Software Installation 1. Before installing CamView software on your PC or laptop, please make sure you have correctly installed the IC-9000. It’s highly recommended to close other Windows applications to prevent the installation from any possbile confliction. 2. Please insert the installation CD ...
