Dolmar HT-2556 D, HT-2576 E - Manuals

Page 2 - Table of contents; Cleaning the air filter insert; Thank you for purchasing a DOLMAR product!; hope that you will be satisfied with this modern tool. DOLMAR; Packaging

Table of contents Page Conformity Declaration ...................................................... Packaging ............................................................................ Delivery inventory .............................................................. 3 Symbols .......................

Page 3 - Delivery inventory; In case one of the parts listed should not be included in the; Symbols

3 4 Delivery inventory 1. Hedge trimmer HT-2576 E (depending on order) 2. Hedge trimmer HT-2556 D (depending on order) 3. Knife guard 4. Universal wrench 5. Instruction Manual (not shown) In case one of the parts listed should not be included in the delivery inventory, please consult your sales agen...

Page 4 - SAFETY PRECAUTIONS; operation of the hedge trimmer. Users insufficiently informed; described in the floowing when working with the hedge

4 5 1 4 3 SAFETY PRECAUTIONS General precautions - In order to ensure safe operation, the operator must read this instruction manual to familiarize him or herself with the operation of the hedge trimmer. Users insufficiently informed will endanger themselves as well as others due to improper handlin...

Page 6 - not operate the trimmer if the muffler is defective, and make; Do not make any modifications to the hedge trimmer. Doing; replace any items used from the first aid box.

6 - After use, clean the trimmer, in particular the cutter. Oil the cutter lightly and put on the blade guard. - Emtpy the fual tank completely before long-term storage or shipping the trimmer. Maintenance - Always switch off the trimmer and pull off the spark plug cap before doing any maintenance! ...

Page 7 - Technical Data; Muffler

7 1 Rear grip 2 Safety cutoff 3 Throttle lever 4 ON/OFF (I/O) switch 5 Starter grip 6 Fuel tank cap Stroke volume cm 3 4,5 4,5 Max. power at speed kW / rpm 0,88 / 7.000 0,88 / 7.000 Idling speed / Max. engine speed with cutter rpm .600 / 9.800 .600 / 9.800 Clutch engagement speed rpm 3.600 3.600 Sou...

Page 8 - The Storage of Fuel; PUTTING INTO OPERATION; Fuel mixture; The engine of the hedge trimmer is a high-efficiency two-stroke

8 + A Gasoline It is not wise to add more engine oil than specified to ensure safe operation. This will only result in a higher production of combus-tion residues which will pollute the environment and clog the exhaust channel in the cylinder as well as the muffler. In addition, fuel consumption wil...

Page 9 - Refuelling; FOLLOW THE SAFETY PRECAUTIONS!; Starting position for the HT-2556 D

9 B C Refuelling FOLLOW THE SAFETY PRECAUTIONS! Be careful and cautious when handling fuels.Refuel only with the engine switched off and cooled down! Thoroughly clean the area around the caps, to prevent dirt from getting into the fuel tank. Unscrew the tank cap and fill the tank with fuel mixture u...

Page 10 - Switching off the engine; Adjusting the carburetor; The carburetor is an injection model with fixed nozzles. This

10 D E 7 Cold start: Move the ON/OFF ( I / O ) switch ( 2 ) to position “I” . Turn the starting lever ( 6 ) to the START position. Press the fuel pump ( 5 ) several (7-10) times to supply fuel to the carburetor.Assume the starting position (see above under Starting posi- tion ). Pull the starter cab...

Page 12 - STOP; Cleaning and care; STOP; MAINTENANCE; Caution: If the play is insufficient, the cutter will heat up; the air filter cover.; the air filter with a brush. Do not allow dirt particles to get

1 A B STOP C STOP Cleaning and care Caution: Be especially careful when cleaning and caring for the cutter (injury hazard!). Never touch the cutter with bare hands. Always wear protective gloves! Regularly check the cutter for damage and clean it with a sui- table brush or cloth.If after extended us...

Page 13 - Checking the muffler bolts /; Do not tighten the muffler bolts when the engine is hot!; Checking the ignition spark; spark plug cap firmly attached, against the engine housing (away; Replacing the spark plug; A hot engine can cause burns. Wear protective gloves!

13 D E F STOP Checking the muffler bolts / cleaning the exhaust outlet Caution: Do not tighten the muffler bolts when the engine is hot! The muffler bolts (6 ) are directly accessible so they can be checked for tightness. If loose, hand-tighten (caution: do not over-tighten).Regularly clean the exha...

Page 15 - Service, spare parts and guarantee; Workshop service; by a DOLMAR service centre.

15 Service, spare parts and guarantee Workshop service The maintenance and repair of modern hedge trimmers as well as all safety devices require qualified technical training and a special workshop equipped with special tools and testing devices.All work not described in this Instruction Manual must ...

Page 16 - Denomination; Extract from the spare parts list; Malfunction; Trouble shooting

16 Pos. DOLMAR-No. Qty. Denomination 1 377 601 400 1 Tank cap, cpl. 2 38 650 390 1 Suction head 3 374 300 401 1 Air filter insert 4 381 014 981 1 Spark plug - 944 340 001 1 Screwdriver - 944 350 000 1 Grease gun Extract from the spare parts list Use only original DOLMAR parts. For repairs and replac...

Page 17 - Notes

Page 20 - DOLMAR GmbH

Form: 995 701 5 (3.06 GB) Specifications subject to change without notice DOLMAR GmbH Postfach 70 04 0 D-004 Hamburg Germany http://www.dolmar.com