Dimplex Unvented Water Heater - Manuals

2 3 TECHNICAL DATA & INSTALLATION INSTRUCTIONS FOR SCx DIRECT & INDIRECT UNVENTED WATER HEATERS Your water heater is made from Duplex Stainless Steel, which is one of the toughest and best grades of steel currently available. Each unit has been individually tested and inspected to industr y ...

4 5 CONNECTING THE WATER SUPPLY ● Pipework is not supplied ● All pipework should be installed using good plumbing practice. We recommend 22mm mains cold water supply is used. ● Install a Stop Cock Valve before the cold water inlet assembly on the incoming mains water supply so the unit can be isolat...

6 7 WIRING All electrical wiring should be carried out by a registered electrical contractor and must conform to the latest IEE wiring regulations Do not switch the power on until the unit has been filled with water and all wiring has been earthed, see Fig. 4 and 5. FITTING IMMERSION HEATERS These a...