Dimplex SI 100ZS - Manual
Dimplex SI 100ZS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CONTENTS
- Page 3 – Important Information; READ IMMEDIATELY; Legal Provisions and Guidelines; C and
- Page 4 – Principle of Operation; SCOPE OF DELIVERY; ) Transport securing
- Page 5 – TRANSPORT; ACCESSORIES; Connecting Flanges; The heat pump must not be tilted; The transport securing device is to
- Page 6 – INSTALLATION; The heat pump offers silent operation due to efficient; MOUNTING; General Information; The heating system must be flushed
- Page 7 – Connection on Heat Source; The supplied strainer must be fitted; C can thus be ensured.; The brine solution must contain at; Electrical Connection; - Connection of the control wire to terminals X1:; The clockwise phase sequence must
- Page 8 – COMMISSIONING; General Information; Commissioning is to be effected in; The overflow valve is to be opened to such an extent
- Page 9 – Cleaning of Heat Source Side; The supplied strainer is to be install-; Cleaning of Heating Side; C a u t i o n - H e a t i n g Te c h n i c i a n s !
- Page 10 – DECOMMISSIONING; Disposal; the event that a malfunction occurs nevertheless,; All work on the heat pump may only
- Page 11 – APPENDIX
- Page 15 – Equipment Data
- Page 24 – APPENDIX: 12.6 EC DECLARATION OF CONFORMITY; EC Declaration of Conformity; The undersigned
- Page 25 – Notes
INSTALLATION and
OPERATING INSTRUCTIONS
Brine-to-Water Heat Pump
for Indoor Installation
CE
Order No.: 452234.67.01
FD 8511
SI 50ZS / SI 75ZS / SI 100ZS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 CONTENTS 1 READ IMMEDIATELY 3 1.1 Important Information 1.2 Legal Provisions and Guidelines 1.3 Energy-Efficient Use of the Heat Pump 2 PURPOSE OF HEAT PUMP 4 2.1 Application 2.2 Principle of Operation 3 SCOPE OF DELIVERY 4 3.1 Baseline Unit 4 ACCESSORIES 5 4.1 Connecting Flanges 5 TRANSPORT 5 6 I...
3 READ IMMEDIATELY 1.1 Important Information Any work on the heat pump may only be performed by an authorised and qualifiedcustomer service. The transport securing devices must be removed after the transport. The heat pump must not be tilted more than max. 45 ° (in either direction). Flush the heati...
4 3 PURPOSE OF HEAT PUMPSCOPE OF DELIVERY PURPOSE OF THE HEATPUMP 2.1 Application The brine-to-water heat pump is designed for usein existing or newly built heating systems. Brine isused as the heat carrier in the heat source system.Ground coils, ground collectors or similar systemscan be used as th...
