De Dietrich DTI 1113 X - Manuals

Page 2 - Warning

2 EN CONTENTS 1 / INSTALLING YOUR APPLIANCE • Installation _________________________________________________________ 3 • Connection _________________________________________________________ 4 2 / USING YOUR APPLIANCE • The induction principle _______________________________________________ 5 • Descr...

Page 3 - / INSTALLING YOUR APPLIANCE; CHOOSING THE POSITION; model; cm; ll; MIN 4 mm; Tip; simultaneous use of the hob and the oven’s pyrolysis program.

3 EN 1 / INSTALLING YOUR APPLIANCE • • CHOOSING THE POSITION The distance between the edge of your applianceand the side and rear walls (or partitions) must be atleast four centimetres (zone A).Y Yo ou urr a ap pp plliia an nc ce e m ma ay y b be e b bu uiilltt iin n w wiitth ho ou utt a an ny y rre...

Page 4 - Connection; If the cable is damaged it must be

4 EN 1 / INSTALLING YOUR APPLIANCE Your appliance should be positioned so that the mains switch is accessible.These hobs must be connected to the mains using a socket in compliance with publication CEI60083 or an all-pole circuit-breaker device in compliance with the installation rules in force. Whe...

Page 5 - / USING YOUR APPLIANCE; •Choosing a cooking area; Cooking

EN 5 2 / USING YOUR APPLIANCE •Choosing a cooking area • The induction principle The principle of induction is based on a mag-netic effect.When you place your cookware on a cookingzone and you turn it on, the electronic circuitsin your cooking hob produce “induced” cur-rents in the bottom of the coo...

Page 6 - Description of your top; DT

Description of your top 6 EN D DT TII1 11 11 13 3X X 00282 1 16 6 c cm m 2200 W 2 23 3 c cm m 3100 W 2 28 8 c cm m 4000 W 2 / USING YOUR APPLIANCE T To otta all d diim me en ns siio on ns s ((L L x x l )) -- DTI1113X : 65 x 51R Re ec ce es ss s c cu utt--o ou utt ((L L’’ x x l ’’)) DTI1113X : 56 X 4...

Page 7 - Adjustment touch controls; K L M

EN 2 / USING YOUR APPLIANCE • Adjustment touch controls Use these touchpads to select, turn on andturn off the cooking zones. When a zone isselected, you will see it light up, and you canadjust its settings. • Adjustment touch controls These touchpads allow you to adjust power,timer, programmer... f...

Page 8 - • BOIL; Using a cooking zone; Adjusting the power level:; Additional functions; •Preheating; HU

EN 8 2 / USING YOUR APPLIANCE N.B. : - The pre-heating time is calculated automati- cally by your hob depending on the cookingpower level chosen. - When HU is displayed, if you do not adjust the cooking power, the zone turns off after afew moments. • BOIL This function allows water to be boiled andk...

Page 9 - •Independent timer; SC

EN 9 2 / USING YOUR APPLIANCE •Independent timer This function allows you to time an event, with-out cooking.- Select a cooking zone you are not using.- Set the time with touchpad J . A “ t ” flashes in the display. - At the end of your adjustment “ t ” becomes becomes fixed and the count begins. No...

Page 10 - •Switch

EN 10 2 / USING YOUR APPLIANCE •Switch This function lets you move a pan from onezone to another, keeping the original settings(power level and time).1 - Press on button M M, and a short beep sounds then the pan is moved to the newzone. 2 - Press on button M M again; the information is displayed on ...

Page 11 - Safety when operating; •Residual heat; AS; • “Small Items” safety

EN 11 2 / USING YOUR APPLIANCE Safety when operating •Residual heat After a long cooking period, the zone usedcan remain hot for several minutes. An ‘’ H ’’ flashes during this period. Do not put yourhand on the zone. •Temperature limiter Each cooking zone is equipped with a safetysensor that consta...

Page 12 - / MAINTAINING YOUR APPLIANCE; Preserve your appliance; TYPES OF STAINS/SPOTS

EN 12 3 / MAINTAINING YOUR APPLIANCE Preserve your appliance The vitroceramic glass sur face is highlyresistant, but not unbreakable. Here are somerecommendations for increasing its lifetime:- Avoid banging or clattering the cookware.- Avoid putting heating covers on the hob. A suction effect may da...

Page 13 - Contact the After-Sales Service Department.; or; •While in use; A special lamp appears.; •On first use

EN 13 4 / SPECIAL MESSAGES, DIFFICULTIES In case of breakage, cracks or even light fissures in the vitroceramic glass, take outthe fuses or turn off the circuit breaker for your hob to avoid the risk of electricalshock. Contact the After-Sales Service Department. The hob does not operate andthe indi...