Daikin FTXS71GV1B- Manuals

4 Names of Parts ■ Indoor Unit 17 16 13 15 14 1 3 4 5 9 11 10 8 2 6 12 7 01_EN_3P248442-3.fm Page 4 Tuesday, September 8, 2009 1:54 PM

5 E ngl ish ■ Outdoor Unit ■ Indoor Unit 1. Air filter 2. Titanium apatite photocatalytic air-purifying filter: • These filters are attached to the inside of the air filters. 3. Air inlet 4. Front panel 5. Panel tab 6. Room temperature sensor: • It senses the air temperature around the unit. 7. INTE...

6 Names of Parts ■ Remote Controller 1. Signal transmitter: • It sends signals to the indoor unit. 2. Display (LCD): • It displays the current settings. (In this illustration, each section is shown with its displays on for the purpose of explanation.) 3. FAN setting button: • It selects the airflow ...

7 E ngl ish Preparation before Operation ■ To set the batteries 1. Slide the front cover to take it off. 2. Set 2 dry batteries AAA.LR03 (alkaline). 3. Set the front cover as before. ■ To operate the remote controller • To use the remote controller, aim the transmitter at the indoor unit. If there i...

8 Preparation before Operation ■ To set the clock 1. Press . • “ ” is displayed. • “ ” and “ ” blinks. 2. Press to set the current day of the week. 3. Press . • “ ” blinks. 4. Press to set the clock to the present time. • Holding down or rapidly increases or decreases the time display. 5. Press . • ...

9 E ngl ish ■ Checks on remote controller settings • This remote controller is common to the heat pump model and cooling only model. Use the DIP switch on the remote controller to set the heat pump model or cooling only model. • Refer to the following explanation and make the setting as shown in the...

10 OPERATION AUTO · DRY · COOL · HEAT · FAN Operation The air conditioner operates with the operation mode of your choice. From the next time on, the air conditioner will operate with the same operation mode. ■ To start operation 1. Press and select a operation mode. • Each pressing of the button ad...

11 E ngl ish ■ To change the airflow rate setting 5. Press . • Indoor unit quiet operation When the airflow is set to “ ”, the noise from the indoor unit will become quieter. Use this when making the noise quieter. NOTE AUTO or COOL or HEAT or FAN operation DRY operation 5 levels of airflow rate set...

12 Adjusting the Airflow Direction You can adjust the airflow direction to increase your comfort. ■ To start auto swing Press . • “ ” is displayed on the LCD. • The flaps (horizontal blades) will begin to swing. Press . • “ ” is displayed on the LCD. • The louvers (vertical blades) will begin to swi...

13 E ngl ish ■ To set the flaps or louvers at desired position • This function is effective while flaps or louvers are in auto swing mode. Press and when the flaps or louvers have reached the desired position. • In the 3-D airflow, the flaps and louvers move in turn. • “ ” or “ ” disappears from the...

15 E ngl ish ■ To start operation Press and select the desired mode. • Each time the is pressed a different setting option is displayed on the LCD. • By selecting “ ” from the following icons, the air conditioner will be in COMFORT AIRFLOW operation combined with INTELLIGENT EYE operation. • When th...

17 E ngl ish POWERFUL Operation POWERFUL operation quickly maximizes the cooling (heating) effect in any operation mode. You can get the maximum capacity. ■ To start POWERFUL operation 1. Press . • POWERFUL operation ends in 20 minutes. Then the system automatically operates again with the previous ...

18 OUTDOOR UNIT QUIET Operation OUTDOOR UNIT QUIET operation lowers the noise level of the outdoor unit by changing the frequency and fan speed on the outdoor unit. This function is convenient during night. ■ To start OUTDOOR UNIT QUIET operation 1. Press . • “ ” is displayed on the LCD. ■ To cancel...

19 E ngl ish ECONO Operation ECONO operation is a function which enables efficient operation by limiting the maximum power consumption value. This function is useful for cases in which attention should be paid to ensure a circuit breaker will not trip when the product runs alongside other appliances...

20 OFF TIMER Operation Timer functions are useful for automatically switching the air conditioner on or off at night or in the morning. You can also use OFF TIMER and ON TIMER in combination. ■ To use OFF TIMER operation • Check that the clock is correct. If not, set the clock to the present time. (...

21 E ngl ish ON TIMER Operation ■ To use ON TIMER operation • Check that the clock is correct. If not, set the clock to the present time. (page 8.) 1. Press . • “ ” and setting time are displayed on the LCD. • “ ” is displayed on the LCD. • “ ” blinks. 2. Press until the time setting reaches the poi...

22 WEEKLY TIMER Operation Up to 4 timer settings can be saved for each day of the week. It is convenient if the WEEKLY TIMER is set according to the family’s life style. ■ Using in these cases of WEEKLY TIMER An example of WEEKLY TIMER settings is shown below. 6:00 8:30 17:30 22:00 25˚C 27˚C 6:00 8:...

23 E ngl ish ■ To use WEEKLY TIMER operation • Make sure the day of the week and time are set. If not, set the day of the week and time. (page 8.) 1. Press . • The day of the week and the reservation number of the current day will be displayed. • 1 to 4 settings can be made per day. 2. Press to sele...

24 WEEKLY TIMER Operation 6. Press to select the desired time. • The time can be set between 0:00 and 23:50 in 10 minute intervals. • To return to the ON/OFF TIMER mode setting, press . • Go to step 9 when setting the OFF TIMER. 7. Press . • The time will be set. • “ ” and the temperature blink. 8. ...

26 WEEKLY TIMER Operation • A reservation made once can be copied another day of the week. The whole reservation of the selected day of the week will be copied. 1. Press . 2. Press to confirm the day of the week to be copied. 3. Press to activate copy mode. • The whole reservation of the selected da...

27 E ngl ish 5. Press . • The reservation will be copied to the selected day of the week. The whole reservation of the selected day of the week will be copied. • To continue copying the settings to other days of the week, repeat step 4 and step 5 . 6. Press to complete the setting. • “ ” is displaye...

28 WEEKLY TIMER Operation ■ Confirming a reservation • The reservation can be confirmed. 1. Press . • The day of the week and the reservation number of the current day will be displayed. 2. Press to select the day of the week and the reservation number to be confirmed. • Pressing the displays the re...

29 E ngl ish ■ To delete reservations • Refer to setting mode. (page 23.) When selecting desired mode at step 4 in setting mode, select “blank”. The reservation will be deleted. • This function can be used for deleting reservations for each day of the week. 5. Press . 6. Select the day of the week t...

30 Note for Multi System This system has one outdoor unit connected to multiple indoor units. ■ Selecting the operation mode 1. With the priority room setting present but inactive or not present. When more than 1 indoor unit is operating, priority is given to the first unit that was turned on. In th...

31 E ngl ish ■ OUTDOOR UNIT QUIET operation (page 18.) 1. With the priority room setting present but inactive or not present. When using the OUTDOOR UNIT QUIET operation feature with the Multi system, set all indoor units to OUTDOOR UNIT QUIET operation using their remote controllers.When clearing O...

32 CARE Care and Cleaning ■ Indoor unit, outdoor unit and remote controller 1. Wipe them with dry soft cloth. ■ Front panel 1. Open the front panel. • Hold the front panel by the panel tabs on the both sides and open it. 2. Remove the front panel. • Slide the front panel to either the left or right ...

33 E ngl ish 1. Pull out the air filters. • Open the front panel.• Push a little upwards the tab at the center of each air filter, then pull it down. 2. Take off the titanium apatite photocatalytic air-purifying filter. • Hold the recessed parts of the frame and unhook the 4 claws. 3. Clean or repla...

34 Care and Cleaning 3-2 Titanium apatite photocatalytic air-purifying filter The titanium apatite photocatalytic air-purifying filter can be renewed by washing it with water once every 6 months. We recommend replacing it once every 3 years. [Maintenance] 3-2-1 Vacuum dusts, and soak in warm water o...

35 E ngl ish Check ■ Before a long idle period 1. Operate the FAN only for several hours on a fine day to dry out the inside. • Press and select FAN operation. • Press and start operation. 2. After operation stops, turn off the breaker for the room air conditioner. 3. Clean the air filters and set t...

36 TROUBLESHOOTING Troubleshooting • Troubleshooting measures are classified into the following two types on a remedial basis. Take an appropriate measure according to the symptom. Not trouble • These cases are not troubles. You may just continue using it. Check • Please check again before calling a...

38 Troubleshooting Operation stopped suddenly. (OPERATION lamp is on.) • For system protection, the air conditioner may stop operating on a sudden large voltage fluctuation. It automatically resumes operation in about 3 minutes. Mist comes out of the indoor unit. • This happens when the air in the r...

39 E ngl ish The ON/OFF TIMER does not operate according to the settings. • Check if the ON/OFF TIMER and the WEEKLY TIMER are set to the same time. Change or deactivate the settings in the WEEKLY TIMER. (page 22.) The indoor unit gives out odour. • This happens when smells of the room, furniture, o...

40 Troubleshooting WARNING ■ When an abnormality (such as a burning smell) occurs, stop operation and turn the breaker off.Continued operation in an abnormal condition may result in troubles, electric shocks or fire.Consult the service shop where you bought the air conditioner. ■ Do not attempt to r...

41 E ngl ish Fault diagnosis by remote controller In the ARC452A series, the temperature display sections on the main unit indicate corresponding codes. 1. When is held down for 5 seconds, a “ ” indication flashes on the temperature display section. 2. Press repeatedly until a continuous beep is pro...