Page 3 - CONTENTS
1 READ BEFORE OPERATION Name and Functions of Buttons ······························ 2 Preparation before Operation ·································· 4 OPERATION FAN · DRY · AUTO · COOL · HEAT Operation ········ 6 TIMER Operation ···················································· 8 SIMPLE 7 DAY T...
Page 4 - Name and Functions of Buttons
2 READ BEFORE OPERATION Name and Functions of Buttons 1 5 6 7 8 9 2 3 4 10 11 13 12 15 14 ● Two remote controllers can connect to the system. In that case, the remote controllers will work as master and sub remote controllers respectively.The sub remote controller is the same in function as the mast...
Page 6 - Preparation before Operation; Turn the breaker ON
4 READ BEFORE OPERATION Preparation before Operation ■ Turn the breaker ON Turn the breaker ON if nothing is displayed on the LCD of the remote controller. ■ Time and Day Settings * If two remote controllers are connected, time and day settings can be made in the master remote controller only. 1 ● “...
Page 7 - To cancel Time and Day Settings; NOTE
5 READ BEFORE OPERATION 7 Press “ button” to enter the settings. ● The set time and day will be displayed. ■ To cancel Time and Day Settings 1 Press “ button”. ● The time and day setting screen will appear. 2 Press “ button” for at least 4 seconds. ● The time and day settings are cancelled. ● Set th...
Page 8 - FAN · DRY · AUTO · COOL · HEAT Operation; To start operation; To stop operation; To change the temperature setting
6 OPERATION FAN · DRY · AUTO · COOL · HEAT Operation The air conditioner operates with the operation mode of your choice.From the next time on, the air conditioner will operate with the same operation mode. ■ To start operation 1 Press “ button” and select an operation mode. FAN DRY COOL HEAT AUTO 2...
Page 9 - To change the air
7 OPERATION ■ To change the air fl ow setting 5 Press “ button” and select an air fl ow rate. ● The volume of air is selectable from two levels while the air conditioner is in either normal mode or AUTO fan mode. ■ Note on HEAT operation ● Since this air conditioner heats the room by absorbing the h...
Page 10 - TIMER Operation; To use ON TIMER and OFF TIMER operation
8 OPERATION TIMER Operation Timer functions are useful for automatically switching the airconditioner on or off at night or in the morning.You can also use ON TIMER and OFF TIMER in combination. ■ To use ON TIMER and OFF TIMER operation ● Make sure the day of the week and time are set. If not, set t...
Page 11 - To cancel ON TIMER and OFF TIMER operation; To combine ON TIMER and OFF TIMER
9 OPERATION ■ To cancel ON TIMER and OFF TIMER operation 1 Press “ button” to select ON TIMER or OFF TIMER. ● The timer setting is displayed. 2 Press “ button” for at least 4 seconds. ● The setting that has been made is cleared. ● When the timer is set next time, the previous setting remains. “ ON ”...
Page 12 - SIMPLE 7 DAY TIMER Operation; To use SIMPLE 7 DAY TIMER operation
10 OPERATION SIMPLE 7 DAY TIMER Operation ■ To use SIMPLE 7 DAY TIMER operation ● Make sure the day of the week and time are set. If not, set the day of the week and time. (page 4.) 1 Press “ button”. ● Each time the button is pressed, the day and program number will shift. ● “ ” and “ ” are display...
Page 14 - To cancel SIMPLE 7 DAY TIMER operation
12 OPERATION 11 Press “ button”. ● To complete the timer setting, press “ button”. The normal display appears again and “ PROG ” is displayed. Press “ button” twice to enter program 2 (If required). ● To set the timer for another day of the week, repeat the procedure from step 1 (page10.) or refer t...
Page 15 - Setting SIMPLE & MULTI 7 DAY TIMER using copy mode
13 OPERATION ■ Setting SIMPLE & MULTI 7 DAY TIMER using copy mode ● A setting can be copied to the setting for the next day. 1 Press “ button”. ● Press the button and select the program number of the desired day of the week to copy.“ ” : blinks. 2 Press “ button”. ● “ ” is displayed on the LCD. ...
Page 16 - MULTI 7 DAY TIMER Operation; To use MULTI 7 DAY TIMER operation
14 OPERATION MULTI 7 DAY TIMER Operation You can set SIMPLE 7 DAY TIMER, zone control, and thermistor switching. ■ To use MULTI 7 DAY TIMER operation 1 Press “ button” for at least of 4 seconds. ● Each time the button is pressed, the day and program number will shift. ● “ ” and “ ” are displayed on ...
Page 18 - Explanation of the 7 DAY TIMER operation
16 OPERATION For 7 DAY TIMER operation, two types are provided: simple and multi. Use the desired type according to your lifestyle and situation. You can use this operation as follows. 6:00 8:30 15:00 21:00 ON OFF ON OFF AUTO, 23°C COOL, 22°C 17:00 21:30 21:40 23:30 ON OFF ON OFF AUTO, 23°C AUTO, 23...
Page 19 - To select ZONE; To cancel ZONE selection; ZONE Control
17 OPERATION For ZONE control, select the rooms you wish to heat or cool. ■ To select ZONE 1 Press “ button”. ● Select the desired ZONE number you wish to switch on. ● “ ” is displayed on the LCD. 2 Press “ button” again. ● The selected zone is fi xed. ● The LED on the remote controller lights up gr...
Page 20 - To switch the temperature sensor
18 OPERATION You can add up to 2 optional temperature sensors. (For example in the living room, bedroom, and so on.)By switching the detection position of the mounted temperature sensors, you can control the temperature according to the temperature of the selected room. ■ To switch the temperature s...
Page 21 - To register the name; Name registration
19 OPERATION You can register a name for each zone and temperature sensor.When you switch the zone or temperature sensor, the registered name will be displayed. ■ To register the name 1 Press “ button” for at least 4 seconds. ● “ ” is displayed on the LCD. ● Each time the “ button” is pressed, the d...
Page 22 - To initialize registered names
20 OPERATION Name registration ■ To initialize registered names 1 Press “ button” for at least 4 seconds. ● The display shifts to name setting. 2 Press “ button” for at least 4 seconds. ● The display returns to the initial state. 01̲EN̲3P209820-1.indd Sec1:22 01̲EN̲3P209820-1.indd Sec1:22 2007/1...
Page 23 - Filter Cleaning Notice Reset; Cleaning
21 CARE ■ Filter Cleaning Notice Reset When the fi lter becomes dirty with dust, or the system has operated for a predetermined period of time the remote controller will notify you that fi lter cleaning is required. (Check the fi lter and see if cleaning is required.) 1 ● The remote controller will ...
Page 24 - MEMO
22 MEMO 01̲EN̲3P209820-1.indd Sec1:24 01̲EN̲3P209820-1.indd Sec1:24 2007/11/06 12:05:36 2007/11/06 12:05:36
(H)-Specifications/webp/1.webp){kind=small}
(H)-Service-Manual/webp/1.webp){kind=small}
