Page 2 - Disclosure; To the User in USA; - Consult the dealer or an experienced radio/TV technician for help.; To the User in CANADA
Disclosure To the User in USA Part 15 of FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installat...
Page 3 - SAFETY CONSIDERATIONS; WARNING; Only qualified personnel must carry out the installation work.; Use only specified accessories and parts for installation work.; external forces act on the terminal connections or wires.; Before touching electrical parts, turn off the unit.; Safety Considerations
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 3 English All phases of the field-installation, including, but not limited to, electrical, piping, safety, etc. must be in accordance with manufacturer’s instructions and must comply with national, state, provincial and local codes. Read the...
Page 4 - CAUTION; NOTE
4 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English CAUTION • Keep water out of the controller. • To avoid electric shock due to entry of water or insects, fill the wiring through- hole with putty. • Do not wash the controller with water as it may result in electrical shocks or fire...
Page 5 - Contents; Before Installation
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 5 English Contents 1 Before Installation ................................................................................................... 7 1.1 Checking that all accessories are included ......................................................
Page 7 - Checking that all accessories are included
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 7 English 1 Before Installation Before you start installing the iTM plus adaptor, complete the following checks: • Check that the iTM plus adaptor comes with all accessories. • Understand where the terminals and switches of the iTM plus adap...
Page 8 - Understanding external dimensions; Understanding where terminals and switches are located; Front face
8 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 1.2 Understanding external dimensions • iTM plus adaptor body 5-7/8 4-23/32 2-11/16 2-21/32 2-1/16 6-5/16 2-13/32 2-13/32 (in.) 1/4 1/4 5/32 5/32 1/4 5/32 1/4 5-1/2 5/32 1.3 Understanding where terminals and switches are located Un...
Page 10 - Determining installation place; Installation place and mounting direction
10 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English The table below shows the status of the CPU ALIVE/ALARM LED when the iTM plus adaptor is operating normally or failed. NOTE [LED status and operation table] Operating condition CPU ALIVE ALARM Normal Blink Off Hardware failure Off...
Page 11 - Required space
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 11 English 1.4.3 Required space The figure shown below indicates the space required for installation. • Make sure that there is a minimum clearance of 25/32 in. between each unit and wiring ducts. • Multiple iTM plus adaptors can be installe...
Page 12 - Electric wiring
12 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 2 Electric wiring This chapter describes the procedure for connecting the iTM plus adaptor with intelligent Touch Manager, DIII-NET-compatible air conditioning devices and other equipment. In addition to air conditioners, the iTM ...
Page 13 - Connecting intelligent Touch Manager; Terminal location and schematic wiring diagram; Wiring specifications
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 13 English 2.1 Connecting intelligent Touch Manager The iTM plus adaptor is a device that increases the number of air conditioners controlled by the intelligent Touch Manager. It needs to be connected to an intelligent Touch Manager to provi...
Page 14 - Address setup and termination resistor
14 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 2.1.3 Address setup and termination resistor For each iTM plus adaptor, a unique address needs to be set. The number for the intelli-gent Touch Manager is always set to "1". Therefore, the setting range for the iTM plus ad...
Page 15 - Connecting DIII-NET-compatible air conditioning equipment
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 15 English 2.2 Connecting DIII-NET-compatible air conditioning equipment DIII-NET is a unique air conditioning equipment communication capability developed by DAIKIN. Using DIII-NET, you can centrally control multiple DIII-NET-compatible air...
Page 17 - Precautions for using multiple centralized controllers
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 17 English NOTE • What’s a remote controller group?A single remote controller can simultaneously control a maximum of 16 indoor units. This capability is referred to as group control. A remote controller group is a group of indoor units cont...
Page 18 - Connecting an emergency stop input device or power meter
18 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English <DIII MASTER> To change the setting of the iTM plus adaptor to SLAVE, change the position of the DIII MASTER switch to the upper position (the position with “SLAVE” mark). SLAVE MASTER When installing multiple centralized co...
Page 20 - Connecting power supply
20 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 2.4 Connecting power supply Connect the iTM plus adaptor to an power supply. WARNING Be sure to perform the operation during power-off conditions. Do not turn on the power supply before all wire connections are completed. Not doin...
Page 22 - Secure installation of iTM plus adaptor; Screw mounting to control enclosure; Installation procedure
22 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 3 Secure installation of iTM plus adaptor There are the following two ways to install the iTM plus adaptor. • Screw mounting to control enclosure • DIN rail mounting 3.1 Screw mounting to control enclosure 3.1.1 Installation proce...
Page 23 - DIN rail mounting
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 23 English 3.2 DIN rail mounting The iTM plus adaptor can be mounted to a 1-3/8 in. DIN rail. <Mounting to DIN rail> Do not use screws to secure the iTM plus adaptor onto the DIN rail.Place the iTM plus adaptor over the top of the DIN ...
Page 24 - Removal from DIN rail
24 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 3.2.1 Removal from DIN rail Pull down the lever at the lower portion of the iTM plus adaptor (1) and pull the unit body (2) out toward you. (1) (1) (2) (2)
Page 25 - Setting DIII-NET address for each air conditioner; Names of buttons and display areas
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 25 English 4 Setting DIII-NET address for each air conditioner The DIII-NET system has the control address used to identify each air conditioner group. This can be referred to as DIII-NET address. You must set the DIII-NET address manually u...
Page 26 - Setting address with wired remote controller
26 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 4.1.1 Setting address with wired remote controller The operation procedure of the wired remote controller is as follows. NOTE After power-on, the controller shows the symbol “ 88 ” for about 1 minute after displaying all informati...
Page 27 - HH
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 27 English 4. Using the Programming time buttons, select the address you want to set. <Step 4> SETTING GROUP 5. Press the SCHEDULE button to make the “GROUP” indicator stay lit. The DIII-NET address has been set. <Step 5> SETTING...
Page 28 - Setting address with navigation remote controller
28 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 4.1.2 Setting address with navigation remote controller The operation procedure of the navigation remote controller is as follows. NOTE You cannot perform the following procedure when the display backlight is off. In this case, pr...
Page 30 - Quick Operation Guide; List; Displaying areas and management points; Down
30 Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor English 5 Quick Operation Guide This chapter describes how to start/stop the areas and management points registered with the intelligent Touch Manager and display their information quickly. For detailed oper-ation procedures, refer to the...
Page 31 - Starting/stopping an area or management point; On
Installation Manual 3P291714-4B DCM601A72 iTM plus adaptor 31 English 5.3 Starting/stopping an area or management point A On A B B A Select the area or management point you want to start or stop. B Select Start or Stop in the On/Off buttons. When operation is started, the icon color changes to green...
(H)-Specifications/webp/1.webp){kind=small}
(H)-Service-Manual/webp/1.webp){kind=small}
