Compaq 113803-001 - Manuals

v Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Chapter 4 Connectors, Switches, Jumpers, and LEDs Connectors ................................................................................................................

vii Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide About This Guide This Maintenance and Service Guide is a troubleshooting guide that can be used for referencewhen servicing Compaq ProLiant 3000 Servers. WARNING: To re...

viii About This Guide WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, do not exceed the level of repair specified in theseprocedures. Because of the complexity of the individual boards andsubassemblies, do not attempt to make repairs at the component...

ix Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Telephone Numbers For the name of your nearest Compaq Authorized Reseller: In the United States, call 1-800-345-1518In Canada, call 1-800-263-5868 For Compaq technical s...

1-1 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Chapter 1 Illustrated Parts Catalog This chapter provides the illustrated parts breakdown and a spare parts list for Compaq ProLiant3000 Servers. See Table 1-1 for the ...

1-2 Illustrated Parts Catalog System Components Exploded View 12 10 26 13 1 21 9 15 19 14 43 35 23 17 16 20 22 44 40 Figure 1-2. Exploded view of Compaq ProLiant 3000 Server system components

1-3 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Spare Parts List Table 1-1 Spare Parts List - Compaq ProLiant 3000 Servers Ref Description Spare Part # CHASSIS 1 Chassis 306574-001 2 Side Access Panel 298364-001 3 Ac...

2-1 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Chapter 2 Removal and Replacement Procedures This chapter provides subassembly/module-level removal and replacement procedures forProLiant 3000 Servers. After completin...

2-2 Removal and Replacement Procedures Symbols in Equipment WARNING: Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface or hot component. Ifthis surface is contacted, the potential for injury exists. To reduce riskof injury from a hot component, al...

2-3 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Rack Warnings WARNING: Always load the heaviest item first and load the rack from the bottom up. This makes the rack “bottom-heavy” and helps prevent the rack frombecom...

2-4 Removal and Replacement Procedures Server Warnings and Precautions WARNING: To reduce the risk of personal injury or damage to the server, you must support the server when loading or unloading it from the rack. The server isnot attached to the support rails of the rack and may fall if not suppor...

2-5 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Locking Casters To remove the locking casters: 1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter. 2. Place the server on its s...

2-6 Removal and Replacement Procedures Caster Mounting Support To remove the caster mounting support: 1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter. 2. Remove the casters. See “Locking Casters” earlier in this chapter. 3. Remove the four T-15 screws secu...

2-7 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Front Bezel Door To remove the front bezel door (tower model only): 1. Swing the front bezel door open approximately 45 degrees. 2. Lift the front bezel door up, then p...

2-8 Removal and Replacement Procedures Front Fixed Bezel The front fixed bezel must be removed to replace the power switch. To remove the frontfixed bezel (tower model only): 1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter. 2. Open the front bezel door. 3....

2-10 Removal and Replacement Procedures Top Access Panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. To remove the top access panel (tower model only): 1. Perform the preparation procedures. See “Preparation Pro...

2-11 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide U-Channel Access Panel The U-channel access panel is removed for replacement only. To remove the U-channelaccess panel: 1. Perform the preparation procedures. See “Pre...

2-12 Removal and Replacement Procedures Side Access Panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. To remove the side access panel: 1. Perform the preparation procedures. See “Preparation Procedures” earlier ...

2-15 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Fans Compaq ProLiant 3000 Servers ship standard with two 120-mm front fans (in positions 1 and 3)and one 92-mm rear fan (in position 5). The figure below shows the loc...

2-17 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Fan Baffle The fan baffle should only be removed if damaged. To remove the fan baffle: 1. Perform the preparation procedures. See “Preparation Procedures” earlier in t...

2-18 Removal and Replacement Procedures Rear Fan Remove the rear fan for replacement or for upgrading to another model fan. To remove the rear fan: 1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter. 2. Remove the side access panel. See “Side Access Panel” ea...

2-19 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Removable Media and Mass Storage Devices Compaq ProLiant 3000 Servers can house up to 12 mass storage devices, including: ■ Preinstalled 3.5-inch 1.44-MB diskette driv...

2-20 Removal and Replacement Procedures Drive Cage Assemblies ProLiant 3000 Servers ship with either Wide-Ultra or Ultra2 drive cage assemblies. The Wide-Ultra and the Ultra2 drive cage assemblies include the drive cage and backplane board. Wide-Ultra Hot-Plug Drive Cage To remove the Wide-Ultra dri...

2-21 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Simplex Enabler Board The Simplex Enabler board is removed when changing the Wide-Ultra drive cage assembly toDuplex mode. To remove the Simplex Enabler board: 1. Perf...

2-22 Removal and Replacement Procedures Ultra2 Hot-Plug Drive Cage To remove the Ultra2 hot-plug drive cage assembly: 1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter. 2. Remove the front bezel door (tower model only). See “Front Bezel Door” earlier in this...

2-23 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Hard Drives Wide-Ultra Hot-Plug Hard Drives Wide-Ultra hot-plug hard drives are removed for replacement or for upgrade to a larger drive . To remove a Wide-Ultra hot-p...

2-24 Removal and Replacement Procedures Ultra2 Hot-Plug Hard Drives Compaq ProLiant 3000 Servers may ship with Ultra2 hot-plug hard drives. Ultra2 hot-plug harddrives are removed for replacement or for upgrade to a larger drive . CAUTION: Do not remove a hot-plug drive if any of the online LEDs are ...

2-25 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Removable Media Devices The removable media area contains the standard CD-ROM drive and two available half-heightdrive bays. Removable Media Panel The removable media ...

2-26 Removal and Replacement Procedures Removable Media Drives The removable media drives are removed for replacement or when installing anothermedia device. To remove a drive from the removable media area, including the CD-ROM drive and tape drive: 1. Perform the preparation procedures. See “Prepar...

2-27 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Diskette Drive The diskette drive is removed for replacement or when installing another media device. To remove the diskette drive: 1. Perform the preparation procedur...

2-28 Removal and Replacement Procedures Cable Folding and Routing Diagrams Figure 2-24. CD-ROM drive cable folding and routing diagram Figure 2-25. Diskette drive cable folding and routing diagram

2-30 Removal and Replacement Procedures Memory Compaq ProLiant 3000 Servers ship standard with either 128 MB or 256 MB SynchronousDRAM (SDRAM) Dual Inline Memory Modules (DIMMs)installed in the DIMM 5 socketlocation. Memory can be expanded to a maximum of 4 GB. Install SDRAM DIMM modules oneat a tim...

2-31 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Any combination of SDRAM DIMMs can be used as long as the guidelines explained earlier arefollowed. Examples of possible SDRAM DIMM upgrade combinations are shown belo...

2-33 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Smart Array 3200 Controller The Smart Array 3200 Controller is removed for replacement or when replacing the I/O board orthe drive cage assembly. To remove the Smart A...

2-34 Removal and Replacement Procedures Netelligent 10/100 TX UTP PCI Controller The Compaq Netelligent 10/100 TX UTP network controller is removed for replacement or toaccess the system I\O board. To remove a Netelligent 10/100 TX UTP PCI controller: 1. Perform the preparation procedures. See “Prep...

2-35 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Processor Compaq ProLiant 3000 Servers support up to two 500 MHz or greater Intel Pentium III Xeonprocessors with corresponding processor power modules and memory bank...

2-36 Removal and Replacement Procedures Processor Power Module To remove a processor power module: 1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter. 2. Remove the side access panel. See “Side Access Panel” earlier in this chapter. 3. Remove the top access p...

2-37 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Hot-Plug Power Supply Compaq ProLiant 3000 Servers ship with one 500/750-watt hot-plug power supply 1 . A second, redundant, hot-plug 750-watt power supply is supporte...

2-39 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Power Supply Blank Panel The power supply blank panel is removed to install a redundant power supply. To remove the power supply blank panel: 1. Perform the preparatio...

2-40 Removal and Replacement Procedures Power Backplane Board The power backplane board is removed for replacement. To remove the power backplane board: 1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter. 2. Remove the power supply(s). See “Hot-Plug Power Sup...

2-41 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide System I/O Board with Subpan The system I/O board with subpan is removed for replacement or to upgrade to a differentCompaq model server. To remove the system I/O boar...

2-42 Removal and Replacement Procedures Power Switch IMPORTANT: To completely remove all power from the system, you must disconnect the power cord from the server. In systems with multiple power supplies, you must disconnectall power cords to completely remove power from the system. To remove the po...

2-43 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide External Replacement Battery The external replacement battery is installed if the permanent lithium battery fails. To install the external replacement battery: WARNING...

3-2 Diagnostic Tools Default Configuration When the system is first powered on, the system ROM detects the un-configured state of thehardware and provides default configuration settings for most devices. By providing thisinitialization, the system can run Diagnostics and other software applications ...

3-3 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Running Compaq Utilities There are three ways to access Compaq Utilities: ■ Run the utilities on the system partition. If the system was installed using SmartStart, the...

3-4 Diagnostic Tools Power-On Self-Test (POST) POST is a series of diagnostic tests that run automatically on Compaq computers when thesystem is turned on. POST checks the following assemblies to ensure that the computer system isfunctioning properly: ■ Processors ■ Keyboard ■ Power supply ■ System ...

3-17 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Diagnostics Software Tables 3-2 through 3-20 include all test error codes generated by Compaq products. Each codehas a corresponding description and recommended action...

3-18 Diagnostic Tools 6. Disable the power-on password by using the Password Disable switch on the system board, if you do not have access to the password. 7. Install a loopback plug (Part Number 142054-001), when required by Diagnostics. 8. Run the latest version of Diagnostics. Running Diagnostics...

3-19 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Primary Processor Test Error Codes The 100 series of Diagnostic error codes identifies failures with processor and system boardfunctions. Table 3-2 Primary Processor T...

3-20 Diagnostic Tools Memory Test Error Codes The 200 series of Diagnostic error codes identifies failures with the memory subsystem. Table 3-3 Memory Test Error Codes Error Code Description Recommended Action 200-xx Invalid memory configuration. Reinsert memory modules in correct location and retes...

3-21 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Keyboard Test Error Codes The 300 series of Diagnostic error codes identifies failures with keyboard and system boardfunctions. Table 3-4 Keyboard Test Error Codes Err...

3-22 Diagnostic Tools Video Display Unit Test Error Codes The 500 series of Diagnostic error codes identifies failures with video or system board functions. Table 3-6 Video Display Unit Test Error Codes Error Code Description Recommended Action 501-xx 502-xx 503-xx 504-xx 505-xx 506-xx 507-xx 508-xx...

3-23 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Diskette Drive Test Error Codes The 600 series of Diagnostic error codes identifies failures with diskette, diskette drive, orsystem board functions. Table 3-7 Diskett...

3-24 Diagnostic Tools Serial Test Error Codes The 1100 series of Diagnostic error codes identifies failures with serial/parallel interface boardor system board functions. Table 3-9 Serial Test Error Codes Error Code Description Recommended Action 1101-xx 1109-xx Serial port test failed. Clock regist...

3-25 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Hard Drive Test Error Codes The 1700 series of Diagnostic error codes identifies failures with hard drives, hard drivecontroller boards, hard drive cabling, and system...

3-26 Diagnostic Tools Tape Drive Test Error Codes The 1900 series of Diagnostic error codes identifies failures with tape cartridges, tape drives,tape drive cabling, adapter boards, or the system board assembly. Table 3-12 Tape Drive Test Error Codes Error Code Description Recommended Action 1900-xx...

3-27 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Advanced VGA Board Test Error Codes The 2400 series of Diagnostic error codes identifies failures with video boards, monitors, or thesystem board assembly. Table 3-13 ...

3-29 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide NetFlex-2 Controller Test Error Codes The 6000 series of Diagnostic error codes identifies failures with 32-bit DualSpeed NetFlex-2and NetFlex-2 Token Ring Controllers...

3-30 Diagnostic Tools Compaq Network Interface BoardsTest Error Codes The 6000 series of Diagnostic error codes identifies failures with 32-bit DualSpeedNetFlex-2/Token Ring Controllers. Table 3-15 Compaq Network Interface Boards Test Error Codes Error Code Description Recommended Action 6000-xx 600...

3-31 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide SCSI Hard Drive Test Error Codes The 6500 series of Diagnostic error codes identifies failures with SCSI hard drives, SCSI harddrive controller boards, SCSI hard drive...

3-32 Diagnostic Tools SCSI Tape Drive Test Error Codes The 6700 series of Diagnostic error codes identifies failures with tape cartridges, tape drives,media changers, tape drive cabling, adapter boards, or the system board assembly. Table 3-18 SCSI Tape Drive Test Error Codes Error Code Description ...

3-34 Diagnostic Tools Pointing Device Interface Test Error Codes The 8600 Diagnostic error codes identifies failures with the pointing device (mouse, trackball,and so on) or the system board assembly. Table 3-20 Pointing Device Interface Test Error Codes Error Code Description Recommended Action 860...

3-35 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Starting DAAD To start DAAD: 1. Insert the DAAD diskette into drive A. 2. Reboot the system - OR - if you are at the DOS prompt, enter the following: A:DAAD NOTE : To ...

3-36 Diagnostic Tools DAAD Diagnostic Messages Table 3-21 lists DAAD diagnostic messages in alphabetical order. Table 3-21 DAAD Diagnostic Messages Message Description Recommended Action Accelerator board not detected Array controller did not detect a configured array accelerator board. Install arra...

3-46 Diagnostic Tools Integrated Management Log On servers supporting the Integrated Management Display, the Compaq Integrated ManagementLog (IML) replaces the Critical Error Log and Correctable Memory Logs. It records systemevents and stores them in an easily viewable form. It marks each event with...

3-47 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Viewing the Event List 1. From Compaq Insight Manager, select the appropriate server, then select View Device Data. The selected server displays, with buttons around i...

3-48 Diagnostic Tools Event List The event list displays the affected components and the associated error messages. Though thesame basic information is displayed, the format of the list may differ, depending on how youview it: on the Integrated Management Display, from within Compaq Insight Manager,...

3-50 Diagnostic Tools Rapid Recovery Services Compaq servers provide rapid recovery services for diagnosing and recovering from errors.These tools are available for local and remote diagnosis and recovery. Rapid recovery means fast identification and resolution of complex faults. The Rapid RecoveryE...

3-52 Diagnostic Tools Hardware Requirements To use this level of ASR-2 over a modem, you need the following: ■ Compaq modem or optional Hayes compatible modem ■ System Configuration Utility and Diagnostics Utility installed on the system partition ofthe hard drive ■ ASR-2 configured to load Compaq U...

3-53 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Compaq Integrated Remote Console The standard Compaq Integrated Remote Console performs a wide range of configurationactivities. Some of the console’s features include...

3-55 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Booting into Compaq Utilities When you enable ASR-2 to start into Compaq Utilities and a critical error occurs, theoperating-system-specific Health Driver logs the err...

3-56 Diagnostic Tools Table 3-23 Compaq System Configuration Utility Pager Settings for Booting into Compaq Utilities Pager Data Setting Description Pager status Enabled Indicates if the pager feature is enabled or disabled. Pager dial string ATDT 555-5555 Indicates the pager dial string and delay b...

3-58 Diagnostic Tools Compaq System Configuration Utility Pager Settingsfor Booting into Compaq Utilities Continued Pager Data Setting Description Network IP address N/A Enter the IP address for this server in standard dot notation. NOTE: This is not used if you select Custom for Network controller....

3-59 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide ■ Network controller Compaq ■ Network host name CPQHOU ■ Network card slot Slot # ■ Network frame type ETHERNET_II ■ Network IP address xxx.xxx.xxx.xxx ■ Network IP ne...

3-60 Diagnostic Tools Critical Error Log The Critical Error Log records memory errors, as well as catastrophic hardware and softwareerrors that cause the system to fail. This information helps you quickly identify and correct theproblem, thus minimizing downtime. You can view the Critical Error Log ...

3-61 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Critical Error Log Messages Continued Message Description NMI - PCI Bus Parity Error A parity error was detected on the PCI bus. NMI - Expansion Board Error A board on...

3-62 Diagnostic Tools Revision History Table Some errors can be resolved by reviewing changes to the server configuration. The server has anAutomatic Revision Tracking (ART) feature that helps you review recent changes to the serverconfiguration. One ART feature is the Revision History Table, which ...

3-64 Diagnostic Tools Remote Service Features Compaq servers have the following management features that you can access via modem ornetwork: Table 3-26 Compaq Servers Remote Management Features Feature Description Service Session Provides remote access to all the utilities on the system partition, i...

3-65 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide ROMPaq Using flash ROM in Compaq servers allows the firmware (BIOS) to be upgraded with system oroption ROMPaq utilities. To upgrade the ROM: ■ Run the ROMPaq utility ...

3-66 Diagnostic Tools ■ Asset Management - Exports asset information from the Compaq Insight Managerdatabase to leading database and spreadsheet applications. ■ Remote Management - Manages in-band or out-of-band devices, online or offline, fromany location. ■ Reporting - Using Automatic Data Collect...

4-1 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Chapter 4 Connectors, Switches, Jumpers, and LEDs This chapter provides connector, switch, jumper, and LED information for CompaqProLiant 3000 Servers. Connectors This ...

4-2 Connectors, Switches, Jumpers, and LEDs System I/O Board Connectors Figure 4-2 shows the system I/O board connectors for ProLiant 3000 Servers. Table 4-2 givesthe corresponding connector descriptions. 1 7 9 12 13 14 15 16 17 6 5 2 3 4 18 19 20 21 22 23 11 8 10 Figure 4-2. System I/O board connec...

4-3 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Switches This section contains information concerning all internal switches on ProLiant 3000 Servers. Configuration Switch Settings Figure 4-3 shows the system I/O boar...

4-4 Connectors, Switches, Jumpers, and LEDs Processor Switch Settings The following figures and table show the location and default settings of the processor switch forProLiant 3000 Servers. There is a different default setting for each processor switch includingthe 350 MHz, 400 MHz, 450 MHz, and 50...

4-6 Connectors, Switches, Jumpers, and LEDs Jumpers The external battery jumper for ProLiant 3000 Servers is located on the system I/O board.Figure 4-8 shows the configuration when using an internal battery 1 or an external battery 2 . 1 INT.JUMPER 2 EXT.JUMPER Figure 4-8. Battery jumper location an...

4-7 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide LEDs This section contains information concerning all service LEDs located on ProLiant 3000Servers. Hot-Plug Power Supply LEDs Each power supply has a status LED and an...

4-8 Connectors, Switches, Jumpers, and LEDs Power Switch LED The power switch LED is located on the front of the server beneath the power switch andilluminates when the power is on. Figure 4-10 shows the location of the power switch LED forProLiant 3000 Servers. Figure 4-10. Power switch LED CD-ROM ...

4-10 Connectors, Switches, Jumpers, and LEDs Hot-Plug Hard Drive LEDs LEDs on each hot-plug hard drive show the operational status of the hard drive. Figure 4-13,Table 4-6, and Figure 4-14 show the hot-plug hard drive LED locations, functions, andreplacement conditions for ProLiant 3000 Servers. CAU...

5-1 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Chapter 5 Physical and Operating Specifications This section provides operating and performance specifications for Compaq ProLiant 3000Servers and optional hardware. ■ ...

5-2 Physical and Operating Specifications System Unit Table 5-1 System Unit Specifications U.S. Metric Dimensions Height 20.5 in 52.1 cm Depth 24.5 in 62.2 cm Width 12.7 in 32.3 cm Weight (Model 1, U.S.) 75 lbs 34 kg Input Requirements Low range High range Rated Input Voltage 100 to 120 V 200 to 240...

5-3 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Power Supply Table 5-2 Power Supply Specifications U.S. Metric Input Specifications Nominal Line Voltage 100 to 120 VAC 200 to 240 VAC Range Input Line 90 to 132 VAC 18...

5-4 Physical and Operating Specifications SDRAM Dual Inline Memory Modules CAUTION: Use only SDRAM DIMMs of the same size, speed, and manufacturer. SDRAM DIMMs from other sources may adversely affect data integrity. Power-OnSelf-Test (POST) will warn of non-supported SDRAM DIMMs. Table 5-3 SDRAM DIM...

5-6 Physical and Operating Specifications IDE CD-ROM Drive Table 5-5 IDE CD-ROM Drive Specifications U.S. Metric Dimensions Height 1.7 in 42.9 mm Weight 5.9 in 150.1 mm Depth 8.1 in 208.0 mm Weight 2.1 lb 950 g Capacity Mode 1, 12 cm 540 MB Mode 2, 12 cm 630 MB Sustained 150 KB/s Access Times Full S...

5-8 Physical and Operating Specifications Smart Array 3200 Controller Table 5-6 Smart Array 3200 Controller Specifications U.S. Metric Dimensions Height 3.9 in 9.9 cm Length 13.75 in 34.9 cm Thickness (including Array Accelerator) 0.60 in 1.5 cm Total Weight (including Array Accelerator) N/A N/A Tem...

5-9 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Hot-Plug Wide-Ultra Hard Drives Table 5-7 Hot-Plug Wide-Ultra Hard Drive Specifications 4.3 GB 4.3 GB 9.1 GB 9.1 GB 18.2 GB Rotational Speed (rpm) 7,200 10,000 7,200 10...

5-10 Physical and Operating Specifications Hot-Plug Wide-Ultra2 Hard Drives Table 5-8 Hot-Plug Wide-Ultra2 Hard Drive Specifications 4.3 GB 4.3 GB 9.1 GB 9.1 GB Rotational Speed (rpm) 7,200 10,000 7,200 10,000 Logical Capacity (MB) 4293.6 4293.6 9100 9100 Height Inches 1.0 1.0 1.0 1.0 Centimeters 2....

Index-1 Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide Index A AC power cord connector location 4-1 access panels side part number 1-3removing 2-12removing, illustrated 2-12replacing 2-12 top part number 1-3removing 2-1...