Code Alarm CA 310 - Manuals

Code Alarm CA 310 – Manual in PDF format online.

Manuals:

Manual Code Alarm CA 310

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - PASSIVE ARMING THE SYSTEM:; If the passive arming feature has been selected:; PROTECTION WHILE THE SYSTEM IS ARMED:

128-6530 2 of 10 Page 2 Your system has many features and available options some of which areselected at time of installation. Consult your installing dealer for options thatmay have been installed and are not listed. ARMING THE SYSTEM: 1. Turn the engine OFF, exit the vehicle, and close all doors, ...

Page 4 - Enter the vehicle, and turn the ignition key to the ON position.; MANUALLY OVERRIDING YOUR SYSTEM:; Turn the ignition key to the ON position.

128-6530 4 of 10 Page 4 If the LED flashes 4 times...pause, 4 times...pause etc., then an intrusionattempt was made by impact or a strong vibration that the shock sensordetected. Check the vehicle for possible damage to the glass or body panels. NOTE: The LED intrusion warning indications are stored...

Page 5 - ELIMINATING/RETURNING THE NORMAL ARM/DISARM CHIRPS; ALARM SIREN CHIRP INDICATION; SYSTEM FUNCTIONS AT A GLANCE

128-6530 5 of 10 Page 5 ELIMINATING/RETURNING THE NORMAL ARM/DISARM CHIRPS You can selectively eliminate the normal arm & disarm chirps using the valet/override switch, following these steps. 1) Turn the ignition key ON the OFF. 2) Within 10 seconds of turning the ignition key OFF, press and rel...

Code Alarm Manuals